EN 15614:2007
|
Protective clothing for firefighters - Laboratory test methods and performance requirements for wildland clothing
|
ISO 13934-1:2013
|
Textiles — Tensile properties of fabrics — Part 1: Determination of maximum force and elongation at maximum force using the strip method
|
EN ISO 1421:2016
|
Rubber- or plastics-coated fabrics - Determination of tensile strength and elongation at break (ISO 1421:2016)
|
ISO 3175-2:2010
|
Textiles Professional care, drycleaning and wetcleaning of fabrics and garments Part 2: Procedure for testing performance when cleaning and finishing using tetrachloroethene
|
ISO 13934-2:2014
|
Textiles Tensile properties of fabrics Part 2: Determination of maximum force using the grab method
|
EN 14052:2012+A1:2012
|
High performance industrial helmets
|
EN 20811 : 1992
|
TEXTILES - DETERMINATION OF RESISTANCE TO WATER PENETRATION - HYDROSTATIC PRESSURE TEST
|
EN ISO 13934-1:2013
|
Textiles - Tensile properties of fabrics - Part 1: Determination of maximum force and elongation at maximum force using the strip method (ISO 13934-1:2013)
|
ISO 6330:2012
|
Textiles Domestic washing and drying procedures for textile testing
|
89/686/EEC : 1989 AMD 5 2012
|
COUNCIL DIRECTIVE OF 21 DECEMBER 1989 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO PERSONAL PROTECTIVE EQUIPMENT
|
ISO 6942:2002
|
Protective clothing — Protection against heat and fire — Method of test: Evaluation of materials and material assemblies when exposed to a source of radiant heat
|
ISO 13935-2:2014
|
Textiles — Seam tensile properties of fabrics and made-up textile articles — Part 2: Determination of maximum force to seam rupture using the grab method
|
EN 702:1994
|
Protective clothing - Protection against heat and flame - Test method: Determination of the contact heat transmission through protective clothing or its materials
|
EN 25077 : 1993
|
TEXTILES - DETERMINATION OF DIMENSIONAL CHANGE IN WASHING AND DRYING
|
EN 136:1998/AC:2003
|
RESPIRATORY PROTECTIVE DEVICES - FULL-FACE MASKS - REQUIREMENTS, TESTING, MARKING
|
ISO 15025:2016
|
Protective clothing Protection against flame Method of test for limited flame spread
|
EN ISO 4674-1:2016
|
Rubber- or plastics-coated fabrics - Determination of tear resistance - Part 1: Constant rate of tear methods (ISO 4674-1:2016)
|
EN ISO 13935-2:2014
|
Textiles - Seam tensile properties of fabrics and made-up textile articles - Part 2: Determination of maximum force to seam rupture using the grab method (ISO 13935-2:2014)
|
EN ISO 13934-2:2014
|
Textiles - Tensile properties of fabrics - Part 2: Determination of maximum force using the grab method (ISO 13934-2:2014)
|
ISO 17493:2016
|
Clothing and equipment for protection against heat Test method for convective heat resistance using a hot air circulating oven
|
EN 420:2003+A1:2009
|
Protective gloves - General requirements and test methods
|
EN 166:2001
|
Personal eye-protection - Specifications
|
EN ISO 20345:2011
|
Personal protective equipment - Safety footwear (ISO 20345:2011)
|
EN ISO 13938-1 : 1999
|
TEXTILES - BURSTING PROPERTIES OF FABRICS - PART 1: HYDRAULIC METHOD FOR DETERMINATION OF BURSTING STRENGTH AND BURSTING DISTENSION
|
EN 469:2005/A1:2006
|
PROTECTIVE CLOTHING FOR FIREFIGHTERS - PERFORMANCE REQUIREMENTS FOR PROTECTIVE CLOTHING FOR FIREFIGHTING
|
EN 171:2002
|
Personal eye-protection - Infrared filters - Transmittance requirements and recommended use
|
EN 443:2008
|
Helmets for fire fighting in buildings and other structures
|
EN ISO 15025:2016
|
Protective clothing - Protection against flame - Method of test for limited flame spread (ISO 15025:2016)
|
EN 340:2003
|
Protective clothing - General requirements
|
ISO 20345:2011
|
Personal protective equipment Safety footwear
|
ISO 1421:2016
|
Rubber- or plastics-coated fabrics — Determination of tensile strength and elongation at break
|
EN 367:1992/AC:1992
|
PROTECTIVE CLOTHING - PROTECTION AGAINST HEAT AND FIRE - METHOD OF DETERMINING HEAT TRANSMISSION ON EXPOSURE TO FLAME
|
ISO 15797:2002
|
Textiles Industrial washing and finishing procedures for testing of workwear
|
ISO 13938-1:1999
|
Textiles Bursting properties of fabrics Part 1: Hydraulic method for determination of bursting strength and bursting distension
|
ISO 7000:2014
|
Graphical symbols for use on equipment Registered symbols
|
EN 531:1995/A1:1998
|
PROTECTIVE CLOTHING FOR INDUSTRIAL WORKERS EXPOSED TO HEAT
|
ISO 4674-1:2016
|
Rubber- or plastics-coated fabrics Determination of tear resistance Part 1: Constant rate of tear methods
|
EN 15090:2012
|
Footwear for firefighters
|
EN ISO 6330:2012
|
Textiles - Domestic washing and drying procedures for textile testing (ISO 6330:2012)
|
EN 2419920 : 1992
|
TEXTILES - DETERMINATION OF RESISTANCE TO SURFACE WETTING (SPRAY TEST) OF FABRICS
|
EN ISO 6942:2002
|
Protective clothing - Protection against heat and fire - Method of test: Evaluation of materials and material assemblies when exposed to a source of radiant heat (ISO 6942:2002)
|
EN 397:2012+A1:2012
|
Industrial safety helmets
|