BS EN 1504-10:2017
Current
Current
The latest, up-to-date edition.
Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity Site application of products and systems and quality control of the works
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
10-24-2017
Publisher
European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Structural stability during preparation,
protection and repair
5 General requirements during preparation,
protection and repair
6 Methods of protection and repair
7 Preparation of substrate
8 Application of products and systems
9 Quality control
10 Maintenance
Annex A (informative) - Guidance and background
information on the normative text
Annex B (informative) - Testing cleanliness of concrete
surface
Annex C (informative) - Testing surface roughness through
the saw-teeth profile method
Annex D (informative) - Testing degree of microcracking of
concrete surfaces
Bibliography
Provides requirements for: - substrate condition before and during application of systems and products; - storage of systems and products; - structural stability during preparation, protection and repair; - methods of protection and repair; - quality control for execution of work; - maintenance of the structure.
This part of EN 1504 gives requirements for: - substrate condition before and during application of systems and products; - storage of systems and products; - structural stability during preparation, protection and repair; - methods of protection and repair; - quality control for execution of work; - maintenance of the structure.
| Committee |
B/517/8
|
| DevelopmentNote |
Supersedes 99/106107 DC. (02/2004) Supersedes 15/30327977 DC. (11/2017)
|
| DocumentType |
Standard
|
| Pages |
80
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NS EN 1504-10 : 2003 + NA 2013 | Identical |
| EN 1504-10:2017 | Identical |
| UNI EN 1504-10 : 2005 | Identical |
| NBN EN 1504-10 : 2004 COR 2005 | Identical |
| DIN EN 1504-10:2015-11 (Draft) | Identical |
| NEN EN 1504-10 : 2017 | Identical |
| I.S. EN 1504-10:2004 | Identical |
| NF EN 1504-10 : 2017 | Identical |
| UNE-EN 1504-10:2006 | Identical |
| SN EN 1504-10 : 2017 | Identical |
| I.S. EN 1504-10:2017 | Identical |
| ONORM EN 1504-10 : 2017 | Identical |
| ACI 562 : 2016 | CODE REQUIREMENTS FOR ASSESSMENT, REPAIR, AND REHABILITATION OF EXISTING CONCRETE STRUCTURES AND COMMENTARY |
| BS 6150(2006) : 2006 | PAINTING OF BUILDINGS - CODE OF PRACTICE |
| EN 12390-3:2009/AC:2011 | TESTING HARDENED CONCRETE - PART 3: COMPRESSIVE STRENGTH OF TEST SPECIMENS |
| EN ISO 4628-2:2016 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering (ISO 4628-2:2016) |
| ISO 8502-4:2017 | Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 4: Guidance on the estimation of the probability of condensation prior to paint application |
| EN 12390-8:2009 | Testing hardened concrete - Part 8: Depth of penetration of water under pressure |
| ISO 8501-1:2007 | Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings |
| EN 1504-5:2013 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 5: CONCRETE INJECTION |
| EN 1504-6:2006 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 6: Anchoring of reinforcing steel bar |
| EN 12190:1998 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of compressive strength of repair mortar |
| EN 12504-3:2005 | Testing concrete in structures - Part 3: Determination of pull-out force |
| EN ISO 4628-1:2016 | PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 1: GENERAL INTRODUCTION AND DESIGNATION SYSTEM (ISO 4628-1:2016) |
| EN 1504-7:2006 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 7: Reinforcement corrosion protection |
| EN ISO 4288 : 1997 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - RULES AND PROCEDURES FOR THE ASSESSMENT OF SURFACE TEXTURE |
| EN 12350-6:2009 | Testing fresh concrete - Part 6: Density |
| EN 1992-3:2006 | Eurocode 2 - Design of concrete structures - Part 3: Liquid retaining and containment structures |
| ISO 2808:2007 | Paints and varnishes Determination of film thickness |
| EN 12390-7:2009 | Testing hardened concrete - Part 7: Density of hardened concrete |
| EN 1504-3:2005 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 3: Structural and non-structural repair |
| EN 1542:1999 | Products and systems for the protection and repair of concrete structures - Test methods - Measurement of bond strength by pull-off |
| ISO 565:1990 | Test sieves — Metal wire cloth, perforated metal plate and electroformed sheet — Nominal sizes of openings |
| EN 13395-2:2002 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of workability - Part 2: Test for flow of grout or mortar |
| EN ISO 2409:2013 | Paints and varnishes - Cross-cut test (ISO 2409:2013) |
| EN 10080:2005 | Steel for the reinforcement of concrete - Weldable reinforcing steel - General |
| EN 1992-2:2005/AC:2008 | EUROCODE 2 - DESIGN OF CONCRETE STRUCTURES - PART 2: CONCRETE BRIDGES - DESIGN AND DETAILING RULES |
| EN 1008:2002 | Mixing water for concrete - Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete |
| EN 14038-1:2016 | Electrochemical realkalization and chloride extraction treatments for reinforced concrete - Part 1: Realkalization |
| EN 12504-2:2012 | TESTING CONCRETE IN STRUCTURES - PART 2: NON-DESTRUCTIVE TESTING - DETERMINATION OF REBOUND NUMBER |
| EN ISO 4628-4:2016 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 4: Assessment of degree of cracking (ISO 4628-4:2016) |
| EN 16242:2012 | Conservation of cultural heritage - Procedures and instruments for measuring humidity in the air and moisture exchanges between air and cultural property |
| ISO 4628-4:2016 | Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 4: Assessment of degree of cracking |
| ISO 4628-3:2016 | Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 3: Assessment of degree of rusting |
| EN ISO 4628-3:2016 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3: Assessment of degree of rusting (ISO 4628-3:2016) |
| ISO 4624:2016 | Paints and varnishes — Pull-off test for adhesion |
| EN 12350-5:2009 | Testing fresh concrete - Part 5: Flow table test |
| ISO 4628-5:2016 | Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 5: Assessment of degree of flaking |
| ISO 4628-1:2016 | Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 1: General introduction and designation system |
| CEN/TS 14038-2:2011 | Electrochemical re-alkalization and chloride extraction treatments for rein-forced concrete - Part 2: Chloride extraction |
| EN ISO 4628-6:2011 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 6: Assessment of degree of chalking by tape method (ISO 4628-6:2011) |
| EN 12390-1:2012 | TESTING HARDENED CONCRETE - PART 1: SHAPE, DIMENSIONS AND OTHER REQUIREMENTS FOR SPECIMENS AND MOULDS |
| EN 12504-4:2004 | Testing concrete - Part 4: Determination of ultrasonic pulse velocity |
| ISO 3274:1996 | Geometrical Product Specifications (GPS) — Surface texture: Profile method — Nominal characteristics of contact (stylus) instruments |
| EN 1992-1-2:2004/AC:2008 | EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN |
| EN 1504-2:2004 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete |
| EN 12390-2:2009 | Testing hardened concrete - Part 2: Making and curing specimens for strength tests |
| ASTM E 337 : 2015 : REDLINE | Standard Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperatures) |
| EN ISO 4624:2016 | Paints and varnishes - Pull-off test for adhesion (ISO 4624:2016) |
| EN ISO 12696:2016 | Cathodic protection of steel in concrete (ISO 12696:2016) |
| EN 13395-3:2002 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of workability - Part 3: Test for flow of repair concrete |
| ISO 4628-6:2011 | Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 6: Assessment of degree of chalking by tape method |
| EN 12350-1:2009 | Testing fresh concrete - Part 1: Sampling |
| ASTM E 1728 : 2016 : REDLINE | Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination |
| EN 1504-4:2004 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 4: Structural bonding |
| EN ISO 8502-4:2017 | Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 4: Guidance on the estimation of the probability of condensation prior to paint application (ISO 8502-4:2017) |
| EN 1504-1:2005 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 1: Definitions |
| EN 1504-8:2016 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and AVCP - Part 8: Quality control and Assessment and verification of the constancy of performance (AVCP) |
| EN 14630:2006 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of carbonation depth in hardened concrete by the phenolphthalein method |
| EN ISO 4628-5:2016 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 5: Assessment of degree of flaking (ISO 4628-5:2016) |
| EN 1062-3:2008 | Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 3: Determination of liquid water permeability |
| EN ISO 8501-1:2007 | Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings (ISO 8501-1:2007) |
| EN 1992-1-1:2004/A1:2014 | EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS |
| EN 12350-7:2009 | Testing fresh concrete - Part 7: Air content - Pressure methods |
| ISO 2409:2013 | Paints and varnishes Cross-cut test |
| EN 14629:2007 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of chloride content in hardened concrete |
| EN 12504-1:2009 | Testing concrete in structures - Part 1: Cored specimens - Taking, examining and testing in compression |
| EN 1990:2002/A1:2005/AC:2010 | EUROCODE - BASIS OF STRUCTURAL DESIGN |
| EN 1766:2017 | Products and systems for the protection and repair of concrete structures - Test methods - Reference concretes for testing |
| EN 13395-4:2002 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of workability - Part 4: Application of repair mortar overhead |
| ISO 12696:2016 | Cathodic protection of steel in concrete |
| EN 14487-1:2005 | Sprayed concrete - Part 1: Definitions, specifications and conformity |
| EN 1881:2006 | Products and systems for the protection and repair of concrete structures - Test methods - Testing of anchoring products by the pull-out method |
| EN 13670:2009 | Execution of concrete structures |
| EN ISO 3274 : 1997 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - NOMINAL CHARACTERISTICS OF CONTACT (STYLUS) INSTRUMENTS |
| EN 206:2013+A1:2016 | Concrete - Specification, performance, production and conformity |
| EN 1504-9:2008 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 9: General principles for the use of products and systems |
| EN ISO 2808:2007 | Paints and varnishes - Determination of film thickness (ISO 2808:2007) |
| ISO 4628-2:2016 | Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 2: Assessment of degree of blistering |
| EN 14487-2:2006 | Sprayed concrete - Part 2: Execution |
| EN 13395-1:2002 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of workability - Part 1: Test for flow of thixotropic mortars |
US$335.40
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.