• There are no items in your cart

BS EN 15431:2008

Current
Current

The latest, up-to-date edition.

Winter and road service area maintenance equipments. Power system and related controls. Interchangeability and performance requirements
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

02-29-2008

Foreword
1 Scope
2 Normative references
3 Power System and related controls
  3.1 Hydraulic system for municipal vehicles - Specifications
      3.1.1 Drive of the oil pump
      3.1.2 Hydraulic Circuits
      3.1.3 Connection between the hydraulic
             system of the vehicle and the implements
      3.1.4 Flow Rates
      3.1.5 Pressure
      3.1.6 Power
      3.1.7 Capacity of the oil tank
      3.1.8 Maximum oil temperature, cooling
             capacity test procedure
      3.1.9 Line cross sections
      3.1.10 Couplings and functions
      3.1.11 Hydraulic Fluid
  3.2 Mechanical Front-Mounted Power Take
      Off PTO, shaft profile and Performance
      3.2.1 General
      3.2.2 Profile A: n = 540 min[-1] P[max] = 60 kW
      3.2.3 Profile B: n = 540 min[-1] or n = 1000
             min[-1] P[max] = 150 kW
      3.2.4 Power take-off shaft profile
  3.3 Electrical Connectors
      3.3.1 Connector 24 V, 7 pins, at the
             front of the vehicle, socket design
             according to ISO 1185
      3.3.2 Connector 12 V, 7 pins, at the front
             of the vehicle, socket design based on
             ISO 1724
      3.3.3 Electrical Connectors in the cabin,
             24 V, 3 pin
      3.3.4 Electrical Connectors in the cabin,
             12 V, 3 pin
Bibliography

Outlines power systems equipped for the operation and able to drive implements and attachments such as snow ploughs and/or spreaders on winter service vehicles or mowers on road service area maintenance vehicles, equipped with front-mounting plates according to EN 15432.

This document applies to power systems equipped for the operation and able to drive implements and attachments such as snow ploughs and/or spreaders on winter service vehicles or mowers on road service area maintenance vehicles, equipped with front-mounting plates according to prEN 15432. The purpose of this standard is to ensure interchangeability of vehicles and implements. The minimum requirements on the performance and the components of the hydraulic system as well as the kind, the size and the location of the connecting elements between the vehicle and the implement are specified in this standard. This standard does not deal with airport equipment. This standard does not cover applications, where the implements need a continuous hydraulic oil flow exceeding 45 l/min.

Committee
B/513/-/16
DevelopmentNote
Supersedes 05/30142542 DC. (02/2008)
DocumentType
Standard
Pages
22
PublisherName
British Standards Institution
Status
Current
Supersedes

Standards Relationship
NF EN 15431 : 2008 Identical
NEN EN 15431 : 2008 Identical
EN 15431:2008 Identical
SN EN 15431 : 2008 Identical
DIN EN 15431:2008-05 Identical
NBN EN 15431 : 2008 Identical
DIN EN 15431 E : 2008 Identical

ISO 16028:1999 Hydraulic fluid power — Flush-face type, quick-action couplings for use at pressures of 20 MPa (200 bar) to 31,5 MPa (315 bar) — Specifications
EN 15432:2008/AC:2010 WINTER AND ROAD SERVICE AREA MAINTENANCE EQUIPMENTS - FRONT-MOUNTED EQUIPMENTS - INTERCHANGEABILITY
ISO 500-3:2014 Agricultural tractors Rear-mounted power take-off types 1, 2, 3 and 4 Part 3: Main PTO dimensions and spline dimensions, location of PTO
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
ISO 1724:2003 Road vehicles Connectors for the electrical connection of towing and towed vehicles 7-pole connector type 12 N (normal) for vehicles with 12 V nominal supply voltage
SAE J 499 : 2014 PARALLEL SIDE SPLINES FOR SOFT BROACHED HOLES IN FITTINGS
EN 60529:1991/AC:2016-12 DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015)
ISO 1185:2003 Road vehicles Connectors for the electrical connection of towing and towed vehicles 7-pole connector type 24 N (normal) for vehicles with 24 V nominal supply voltage
ISO 16844-2:2011 Road vehicles Tachograph systems Part 2: Electrical interface with recording unit

View more information
US$170.10
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.