EN 10247:2017
|
Micrographic examination of the non-metallic inclusion content of steels using standard pictures
|
EN ISO 6506-1:2014
|
Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014)
|
ISO 6506-1:2014
|
Metallic materials Brinell hardness test Part 1: Test method
|
ISO 7619-1:2010
|
Rubber, vulcanized or thermoplastic Determination of indentation hardness Part 1: Durometer method (Shore hardness)
|
ISO 4967:2013
|
Steel — Determination of content of non-metallic inclusions — Micrographic method using standard diagrams
|
EN ISO 286-1:2010/AC:2013
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 1: BASIS OF TOLERANCES, DEVIATIONS AND FITS (ISO 286-1:2010/COR 1:2013)
|
UIC 520 : 7ED 2003
|
WAGONS, COACHES AND VANS - DRAW GEAR - STANDARDISATION
|
ISO 815-2:2014
|
Rubber, vulcanized or thermoplastic Determination of compression set Part 2: At low temperatures
|
EN 10079:2007
|
Definition of steel products
|
ISO 813:2016
|
Rubber, vulcanized or thermoplastic Determination of adhesion to a rigid substrate 90 degree peel method
|
EN ISO 6892-1:2016
|
Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016)
|
UIC 827-1 : 2ED 1990
|
TECHNICAL SPECIFICATION FOR THE SUPPLY OF ELASTOMER COMPONENTS FOR BUFFERS
|
EN 10228-2:2016
|
Non-destructive testing of steel forgings - Part 2: Penetrant testing
|
EN 15085-1:2007+A1:2013
|
Railway applications - Welding of railway vehicles and components - Part 1: General
|
ISO 815-1:2014
|
Rubber, vulcanized or thermoplastic Determination of compression set Part 1: At ambient or elevated temperatures
|
EN ISO 377:2017
|
Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:2017)
|
EN ISO 643:2012
|
Steels - Micrographic determination of the apparent grain size (ISO 643:2012)
|
UIC B36 RP 32 : 1989
|
CHARACTERISTICS OF THE BUFFING AND DRAW GEAR OF WAGONS TO ENSURE THE SAFE RUNNING OF LONG VEHICLES IN SMALL RADIUS CURVES
|
ISO 6892-1:2016
|
Metallic materials Tensile testing Part 1: Method of test at room temperature
|
ISO 188:2011
|
Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests
|
EN 15839:2012+A1:2015
|
Railway applications - Testing for the acceptance of running characteristics of railway vehicles - Freight wagons - Testing of running safety under longitudinal compressive forces
|
ISO 9606-1:2012
|
Qualification testing of welders — Fusion welding — Part 1: Steels
|
EN 10168:2004
|
Steel products - Inspection documents - List of information and description
|
EN 15085-5:2007
|
Railway applications - Welding of railway vehicles and components - Part 5: Inspection, testing and documentation
|
EN 10228-1:1999
|
Non-destructive testing of steel forgings - Part 1: Magnetic particle inspection
|
EN 10308:2001
|
Non destructive testing - Ultrasonic testing of steel bars
|
UIC B51 RP 27 : 1995
|
DESIGN AND TESTING OF NEW DRAW GEAR FOR WAGONS
|
UIC 825 : 4ED 1985
|
TECHNICAL SPECIFICATION FOR THE SUPPLY OF DRAW HOOKS WITH NOMINAL LOAD EQUAL TO 250 KN, 600 KN OR 1000 KN FOR TRACTIVE AND TRAILING STOCK
|
PREN 16839 : DRAFT 2015
|
RAILWAY APPLICATIONS - ROLLING STOCK - HEAD STOCK LAYOUT
|
EN 10021:2006
|
General technical delivery conditions for steel products
|
EN 10204:2004
|
Metallic products - Types of inspection documents
|
EN ISO 6892-2:2011
|
Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature (ISO 6892-2:2011)
|
UIC 827-2 : 3ED 1981
|
TECHNICAL SPECIFICATION FOR THE SUPPLY OF STEEL RINGS FOR BUFFER SPRINGS
|
ISO 643:2012
|
Steels Micrographic determination of the apparent grain size
|
EN 15020:2006+A1:2010
|
Railway applications - Rescue coupler - Performance requirements, specific interface geometry and test methods
|
ISO 6892-2:2011
|
Metallic materials Tensile testing Part 2: Method of test at elevated temperature
|
ISO 37:2017
|
Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties
|
EN 15085-2:2007
|
Railway applications - Welding of railway vehicles and components - Part 2: Quality requirements and certification of welding manufacturer
|
UIC 826 : 3ED 2004
|
TECHNICAL PROVISIONS FOR THE SUPPLY OF SCREW COUPLINGS FOR TRACTIVE AND TRAILING STOCK
|
ISO 48:2010
|
Rubber, vulcanized or thermoplastic Determination of hardness (hardness between 10 IRHD and 100 IRHD)
|
EN ISO 9606-1:2017
|
Qualification testing of welders - Fusion welding - Part 1: Steels (ISO 9606-1:2012 including Cor 1:2012 and Cor 2:2013)
|
ISO 377:2017
|
Steel and steel products — Location and preparation of samples and test pieces for mechanical testing
|
EN 15085-3:2007/AC:2009
|
RAILWAY APPLICATIONS - WELDING OF RAILWAY VEHICLES AND COMPONENTS - PART 3: DESIGN REQUIREMENTS
|
EN 15085-4:2007
|
Railway applications - Welding of railway vehicles and components - Part 4: Production requirements
|
ISO 4968:1979
|
Steel Macrographic examination by sulfur print (Baumann method)
|