• There are no items in your cart

BS EN 1755:2015

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Industrial Trucks. Safety requirements and verification. Supplementary requirements for operation in potentially explosive atmospheres
Available format(s)

Hardcopy , PDF

Superseded date

01-16-2024

Language(s)

English

Published date

11-30-2015

This European Standard applies to self-propelled and pedestrian propelled manual and semi-manual industrial trucks as defined in ISO5053‑1 including their load handling devices and attachments (hereafter referred to as trucks) intended for use in potentially explosive atmospheres. NOTE1 Attachments mounted on the load carrier or on fork arms which are removable by the user are not considered to be a part of the truck. This European Standard specifies supplementary technical requirements for the prevention of the ignition of an explosive atmosphere of flammable gases, vapours, mists or dusts by industrial trucks of equipment group II and equipment category 2G, 3G, 2D or 3D. NOTE2 The relationship between an equipment category (hereafter referred to as category) and the corresponding zone (area classification) is shown in informative AnnexB. This European Standard does not include: trucks of equipment group I; trucks of equipment group II, equipment category1; trucks intended for use in potentially explosive atmospheres with hybrid mixtures; protective systems. This European Standard is not applicable to trucks intended for use in potentially explosive atmospheres of carbon disulphide (CS 2), carbon monoxide (CO) and/or ethylene oxide (C 2H 4O) due to the special properties of these gases. This standard is applicable to trucks intended for use in atmospheres with an ambient temperature range of - 20°C to+40°C, i.e. trucks built in accordance with this European Standard will be satisfactory to any service conditions within this range unless otherwise specified. NOTE3 The ambient temperature range -20°C to+40°C is in line with ENISO3691‑1 .

Committee
MHE/7
DevelopmentNote
Supersedes 94/715213 DC. (09/2005) Supersedes 12/30249552 DC. (05/2013) Supersedes 13/30257895 DC. (12/2015)
DocumentType
Standard
Pages
56
PublisherName
British Standards Institution
Status
Superseded
SupersededBy
Supersedes

Standards Relationship
I.S. EN 1755:2015 Identical
NS EN 1755 : 2015 Identical
SN EN 1755:2016 Identical
EN 1755:2015 Identical
NBN EN 1755 : 2015 Identical
NEN EN 1755 : 2015 Identical
UNE-EN 1755:2016 Identical
NF EN 1755 : 2016 Identical
UNI EN 1755 : 2013 Identical
DIN EN 1755:2016-02 Identical

12/30258581 DC : 0 BS 5908-2 - FIRE AND EXPLOSION PRECAUTIONS AT PREMISES HANDLING FLAMMABLE GASES, LIQUIDS AND DUSTS - PART 2: GUIDE TO APPLICABLE STANDARDS AND REGULATIONS
BS 5908-2:2012 Fire and explosion precautions at premises handling flammable gases, liquids and dusts Guide to applicable standards and regulations
EI Model code of safe practice Part 15:2015 MODEL CODE OF SAFE PRACTICE - PART 15: AREA CLASSIFICATION FOR INSTALLATIONS HANDLING FLAMMABLE FLUIDS
EI MODEL CODE SAFE PRACTICE PT1 : 2010 THE SELECTION, INSTALLATION, INSPECTION, AND MAINTENANCE OF ELECTRICAL AND NON ELECTRICAL APPARATUS IN HAZARDOUS AREAS

EN 1834-3:2000 Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 3: Group II engines for use in flammable dust atmospheres
EN 61508-6:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 6: Guidelines on the application of IEC 61508-2 and IEC 61508-3
EN 1127-1:2011 Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology
ISO 3691-5:2014 Industrial trucks Safety requirements and verification Part 5: Pedestrian-propelled trucks
EN 60079-32-2:2015 Explosive atmospheres - Part 32-2: Electrostatics hazards - Tests
EN 61508-1:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements
EN 1526:1997+A1:2008 Safety of industrial trucks - Additional requirements for automated functions on trucks
EN 1525:1997 Safety of industrial trucks - Driverless trucks and their systems
EN 60079-29-1:2016 Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases
ISO 9563:2015 Belt drives Electrical conductivity of antistatic endless synchronous belts Characteristics and test method
ISO 22877:2004 Castors and wheels — Vocabulary, symbols and multilingual terminology
EN 60079-0:2012/A11:2013 EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011, MODIFIED)
EN ISO 20344:2011 Personal protective equipment - Test methods for footwear (ISO 20344:2011)
IEC 60079-17:2013 Explosive atmospheres - Part 17: Electrical installations inspection and maintenance
EN 60079-15:2010 Explosive atmospheres - Part 15: Equipment protection by type of protection "n"
EN 16307-6:2014 Industrial trucks - Safety requirements and verification - Part 6: Supplementary requirements for burden and personnel carriers
IEC 60079-29-3:2014 Explosive atmospheres - Part 29-3: Gas detectors - Guidance on functional safety of fixed gas detection systems
EN 13463-1:2009 Non-electrical equipment for use in potentially explosive atmospheres - Part 1: Basic method and requirements
ISO 13564-1:2012 Powered industrial trucks — Test methods for verification of visibility — Part 1: Sit-on and stand-on operator trucks and variable-reach trucks up to and including 10 t capacity
ISO 3691-1:2011 Industrial trucks — Safety requirements and verification — Part 1: Self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks
EN ISO 3691-6:2015/AC:2016 INDUSTRIAL TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 6: BURDEN AND PERSONNEL CARRIERS (ISO 3691-6:2013)
CLC/TR 60079-32-1:2015 Explosive atmospheres - Part 32-1: Electrostatic Hazards - Guidance
EN 1175-1:1998+A1:2010 Safety of industrial trucks - Electrical requirements - Part 1: General requirements for battery powered trucks
EN 1175-3:1998+A1:2010 Safety of industrial trucks - Electrical requirements - Part 3: Specific requirements for the electric power transmission systems of internal combustion engine powered trucks
EN 16307-1:2013+A1:2015 Industrial trucks - Safety requirements and verification - Part 1: Supplementary requirements for self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks
EN 13237:2012 Potentially explosive atmospheres - Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres
ISO 12100:2010 Safety of machinery — General principles for design — Risk assessment and risk reduction
EN 1459:1998+A3:2012 Safety of industrial trucks - Self-propelled variable reach trucks
EN 12895:2015 Industrial trucks - Electromagnetic compatibility
EN 14986:2017 Design of fans working in potentially explosive atmospheres
EN 1175-2:1998+A1:2010 Safety of industrial trucks - Electrical requirements - Part 2: General requirements of internal combustion engine powered trucks
EN 60079-31:2014 Explosive atmospheres - Part 31: Equipment dust ignition protection by enclosure "t"
EN 13463-8:2003 Non-electrical equipment for potentially explosive atmospheres - Part 8: Protection by liquid immersion 'k'
ISO 1813:2014 Belt drives — V-ribbed belts, joined V-belts and V-belts including wide section belts and hexagonal belts — Electrical conductivity of antistatic belts: Characteristics and methods of test
ISO 284:2012 Conveyor belts — Electrical conductivity — Specification and test method
ISO 15870:2000 Powered industrial trucks — Safety signs and hazard pictorials — General principles
EN 1757-3:2002 Safety of industrial trucks - Pedestrian controlled manual and semi-manual trucks - Part 3: Platform trucks
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
IEC 60079-29-2:2015 RLV Explosive atmospheres - Part 29-2: Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen
EN ISO 3691-5:2015/AC:2016 INDUSTRIAL TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 5: PEDESTRIAN-PROPELLED TRUCKS (ISO 3691-5:2014)
EN 50271:2010 Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen - Requirements and tests for apparatus using software and/or digital technologies
IEC 60079-0:2011 Explosive atmospheres - Part 0: Equipment - General requirements
EN 16307-5:2013 Industrial trucks - Safety requirements and verification - Part 5: Supplementary requirements for pedestrian-propelled trucks
IEC 60079-14:2013 Explosive atmospheres - Part 14: Electrical installations design, selection and erection
EN 13059:2002+A1:2008 Safety of industrial trucks - Test methods for measuring vibration
ISO 6292:2008 Powered industrial trucks and tractors Brake performance and component strength
EN ISO 12100:2010 Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010)
EN 60079-14:2014/AC:2016 EXPLOSIVE ATMOSPHERES - PART 14: ELECTRICAL INSTALLATIONS DESIGN, SELECTION AND ERECTION (IEC 60079-14:2013/COR1:2016)
IEC 60079-31:2013 Explosive atmospheres - Part 31: Equipment dust ignition protection by enclosure "t"
EN ISO 13849-1:2015 Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015)
IEC 61508-6:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 6: Guidelines on the application of IEC 61508-2 and IEC 61508-3 (see Functional Safety and IEC 61508)
EN 60079-17:2014 Explosive atmospheres - Part 17: Electrical installations inspection and maintenance
EN 13463-5:2011 Non-electrical equipment intended for use in potentially explosive atmospheres - Part 5: Protection by constructional safety 'c'
IEC 61508-1:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements (see Functional Safety and IEC 61508)
EN 60529:1991/AC:2016-12 DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015)
EN 13463-3:2005 Non-electrical equipment for use in potentially explosive atmospheres - Part 3: Protection by flameproof enclosure 'd'
EN 1149-5:2008 Protective clothing - Electrostatic properties - Part 5: Material performance and design requirements
ISO/TS 3691-7:2011 Industrial trucks — Safety requirements and verification — Part 7: Regional requirements for countries within the European Community
EN 60079-29-2:2015 Explosive atmospheres - Part 29-2: Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen
EN 50495:2010 Safety devices required for the safe functioning of equipment with respect to explosion risks
EN ISO 3691-1:2015/AC:2016 INDUSTRIAL TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 1: SELF-PROPELLED INDUSTRIAL TRUCKS, OTHER THAN DRIVERLESS TRUCKS, VARIABLE-REACH TRUCKS AND BURDEN-CARRIER TRUCKS (ISO 3691-1:2011, INCLUDING COR 1:2013)
ISO 3691-6:2013 Industrial trucks Safety requirements and verification Part 6: Burden and personnel carriers
EN 12053:2001+A1:2008 Safety of industrial trucks - Test methods for measuring noise emissions
EN 60079-29-3:2014 Explosive atmospheres - Part 29-3: Gas detectors - Guidance on functional safety of fixed gas detection systems
ISO 13849-1:2015 Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design
EN 50272-3 : 2002 COR 2003 SAFETY REQUIREMENTS FOR SECONDARY BATTERIES AND BATTERY INSTALLATIONS - PART 3: TRACTION BATTERIES
IEC 60079-15:2010 Explosive atmospheres - Part 15: Equipment protection by type of protection "n"
EN 1834-1:2000 Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 1: Group II engines for use in flammable gas and vapour atmospheres
ISO 20344:2011 Personal protective equipment Test methods for footwear
1994/9/EC : 1994 DIRECTIVE 94/9/EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL OF 23 MARCH 1994 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES
ISO 5053-1:2015 Industrial trucks Terminology and classification Part 1: Types of industrial trucks

View more information
US$311.44
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.