BS EN 2133:2010
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Hardcopy , PDF
12-23-2020
English
02-28-2011
Foreword
1 Scope
2 Normative references
3 Purpose of process
4 Limitations of process use
5 Terms and definitions
6 Coating thickness
7 Symbols
8 Information for the processor
9 Condition of parts prior to the treatment
10 Process schedule
11 Post-treatment
12 Removal of the plating
13 Required characteristics
14 Test methods
15 Quality assurance
16 Designation
Defines the electrolytic cadmium plating of parts in steel of tensile strength R[m] (max.) <= 1450 MPa, copper, copper alloys and nickel alloys, whose temperature in service does not exceed 235 degrees C.
This European standard specifies the electrolytic cadmium plating of parts in steel of tensile strength Rm (max.) ≤ 1 450 MPa, copper, copper alloys and nickel alloys, whose temperature in service does not exceed 235 °C.
Committee |
ACE/65
|
DevelopmentNote |
Supersedes 92/71701 DC. (09/2005) Supersedes 09/30207944 DC. (02/2011)
|
DocumentType |
Standard
|
Pages |
14
|
PublisherName |
British Standards Institution
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
Standards | Relationship |
ONORM EN 2133 : 2011 | Identical |
NEN EN 2133 : 2010 | Identical |
EN 2133:2010 | Identical |
I.S. EN 2133:2010 | Identical |
NBN EN 2133 : 2010 | Identical |
UNI EN 2133 : 2011 | Identical |
UNE-EN 2133:1998 | Identical |
NF EN 2133 : 2012 | Identical |
DIN EN 2133:2011-05 | Identical |
NS EN 2133 : 2010 | Identical |
BS 6SP 4(2000) : 2000 | AEROSPACE SERIES - PINS HEADED, PLAIN SHANK, DRILLED, STEEL ALLOY AND CORROSION RESISTING STEEL WITH A STRENGTH CLASS 880 MPA |
BS 2A173(1962) : 1962 | SPECIFICATION FOR 100 DEGREES COUNTERSUNK HEAD STEEL BOLTS (UNIFIED THREADS), CADMIUM PLATED, FOR AIRCRAFT |
BS SP126 & SP127(1959) : 1959 | WASHERS FOR UNIFIED HEXAGONS FOR AIRCRAFT (PRIMARILY FOR FACING PURPOSES) |
BS SP122-125(1958) : 1958 | WASHERS FOR UNIFIED HEXAGONS FOR AIRCRAFT (PRIMARILY FOR PACKING PURPOSES) |
BS EN 2364:1989 | Specification for pins, shear headed, close tolerance |
11/30252412 DC : 0 | BS 4A 116 - STEEL PAN HEAD BOLTS (UNIFIED THREADS) (CADMIUM PLATED) FOR AIRCRAFT |
BS SP 41-46(1951) : 1951 | SPECIFICATIONS FOR TAB WASHERS FOR B.A. AND B.S.W. HEXAGONS FOR AIRCRAFT |
BS SP134-SP138(1968) : 1968 | AEROSPACE SERIES - SPECIFICATION FOR COPPER BERYLLIUM CRINKLE WASHERS |
SBAC TS 120 : 6 | AGS2000 SERIES STIFFNUTS (INCLUDING CLINCH NUTS) BA & BSF THREADS FOR AIRCRAFT |
15/30329889 DC : 0 | BS A 266 TO 271 - BOLT, 100 DEGREES COUNTERSUNK HEAD, HI-TORQUE SPEED DRIVE RECESS, UNJF THREAD, SPLIT PIN HOLE OPTION, TITANIUM ALLOY, VARIOUS FINISHES, CLASSIFICATION: 80 TF/IN[2] (1100 MPA) AT TA/+315 DEGREES C |
BS 4A 116:2012 | Steel pan head bolts (Unified threads), cadmium plated, for aircraft |
BS 2SP91-92(1973) : 1973 | SPECIFICATION FOR CARBON STEEL WORM DRIVE CLAMPS FOR AIRCRAFT |
BS 3SP 1:2013 | Specification. Shackles, carbon steel, cadmium plated for aircraft |
BS SP22-27(1950) : 1950 | SPECIFICATION FOR BA WASHERS - FOR AIRCRAFT PURPOSES (PRIMARILY FOR FOR INSTRUMENT USE |
13/30274750 DC : 0 | BS 2A 204 ETC+A3 - SPECIFICATIONS FOR MACHINE SCREWS AND NUTS (UNIFIED THREADS) BELOW 1/4 INCH FOR AERONAUTICAL PURPOSES |
12/30256512 DC : 0 | BS SP 41-46+A5 - SPECIFICATIONS FOR TAB WASHERS FOR B.A. AND B.S.W. HEXAGONS FOR AIRCRAFT |
12/30266655 DC : DRAFT JULY 2012 | BS SP 139-140 A2 - SPECIFICATION FOR CORROSION-RESISTING STEEL CRINKLE WASHERS |
BS 2SP81&2SP82(1973) : 1973 | SPECIFICATION FOR SNAP HEAD HIGH NICKEL-COPPER ALLOY RIVETS |
BS 2A 266 to 2A 271:2016+A1:2019 | Aerospace Series. Bolt, 100° Countersunk head, Hi-Torque speed drive recess, close tolerance shank, UNJF thread, split pin hole option, titanium alloy, various finishes. Classification: R<sub>m</sub> 1100–1250 MPa (160 000–180 000 lbf/in<sup>2</sup>) at Ambient Temperature | +315 °C |
BS 2SP87&2SP88(1973) : 1973 | AEROSPACE SERIES - 100 DEGREES COUNTERSUNK HEAD HIGH NICKEL-COPPER ALLOY RIVETS |
BS 4A102(2002) : 2002 | AEROSPACE SERIES - SPECIFICATION FOR STEEL BOLTS (UNIFIED HEXAGONS AND UNIFIED THREADS) FOR AIRCRAFT |
15/30281806 DC : 0 | BS A 401 TO A 420 - AEROSPACE SERIES - SPECIFICATION FOR SCREWS, PAN AND 100 DEGREES COUNTERSUNK HEAD, HEXALOBULAR DRIVE RECESS (UNIFIED THREADS BELOW 1/4 INCH), VARIOUS MATERIALS |
BS EN 2498:1990 | Specification for rod ends, adjustable self-aligning plain bearing, with self-lubricating liner and threaded shank. Dimensions and loads |
12/30264058 DC : DRAFT JULY 2012 | BS 4A 113 A1 - SPECIFICATION FOR CADMIUM-PLATED, MUSHROOM-HEADED, UNIFIED-THREAD, SLOTTED DRIVE, BOLTS |
BS SP139 & SP140(1969) : 1969 | AEROSPACE SERIES - SPECIFICATION FOR CORROSION-RESISTING STEEL CRINKLE WASHERS |
12/30266661 DC : DRAFT JULY 2012 | BS SP 134-138 AMD1 - SPECIFICATION FOR COPPER BERYLLIUM CRINKLE WASHERS |
BS SP10&11(1949) : 1949 | SPECIFICATION FOR WASHERS FOR AIRCRAFT PURPOSES (PRIMARILY FOR FACING PURPOSES) |
BS 4A113(1999) : 1999 | AEROSPACE SERIES - SPECIFICATION FOR CADMIUM-PLATED, MUSHROOM-HEADED, UNIFIED-THREAD, SLOTTED DRIVE BOLTS |
11/30254199 DC : 0 | BS 3 SP 1 - SPECIFICATION - CARBON STEEL SHACKLES, CADMIUM PLATED |
BS 2A 260-2A 265:2010 | Specification for pan and 100° countersunk slotted head screws with ISO metric screw threads |
12/30256515 DC : 0 | BS SP 107-112+A5 - SPECIFICATIONS FOR TAB WASHERS FOR UNIFIED HEXAGONS FOR AIRCRAFT |
BS SP107-112(1954) : 1954 | SPECIFICATIONS FOR TAB WASHERS FOR UNIFIED HEXAGONS FOR AIRCRAFT |
BS A 401-420:2015 | Specification for screws, pan and 100° countersunk head, hexalobular drive recess (unified threads below ¼ inch) in various materials |
BS EN 2587:1990 | Specification for rod ends, adjustable double fork and threaded shank. Dimensions and loads |
BS EN 2586:1991 | Specification for washers, lock for flight control rods. Dimensions |
BS EN 2790:1991 | Rod ends, adjustable, self-aligning plain bearing with self-lubricating liner and threaded shank with engagement: 1.5 thread. Dimensions and loads |
BS EN 2515:1990 | Specification for rod ends, adjustable single fork and threaded shank. Dimensions and loads |
BS EN 2791:1991 | Rod ends, adjustable, single fork and threaded shank with engagement: 1.5 thread diameter. Dimensions and loads |
11/30251779 DC : 0 | BS 6SP 4:2000+A3 - PINS HEADED, PLAIN SHANK, DRILLED, STEEL ALLOY AND CORROSION RESISTING STEEL WITH A STRENGTH CLASS 880/1080 MPA |
12/30264056 DC : DRAFT JULY 2012 | BS 4A 102 A2 - SPECIFICATION FOR STEEL BOLTS (UNIFIED HEXAGONS AND UNIFIED THREADS) FOR AIRCRAFT |
10/30234053 DC : 0 | BS A 275-A 276 + A2 - HEXAGON SELF-LOCKING NUTS WITH NON-METALLIC LOCKING INSERTS - METRIC SERIES |
BS 3A125 TO 3A[...](1981) : 1981 | AEROSPACE SERIES - SPECIFICATION FOR STIFFNUTS (UNIFIED THREADS) FOR AIRCRAFT |
BS SP13, 14, 15 & 16(1949) : 1949 | SPECIFICATION FOR WASHERS FOR AIRCRAFT PURPOSES - (PRIMARILY FOR PACKING PURPOSES) |
BS A275,A276,A277,A278,A279,A280(1981) : 1981 | AEROSPACE SERIES - SPECIFICATION FOR HEXAGON SELF-LOCKING NUTS WITH NON-METALLIC LOCKING INSERTS - METRIC SERIES |
BS EN 2792:1991 | Rod ends, adjustable, double fork and threaded shank with engagement: 1.5 thread diameter. Dimensions and loads |
EN 9100:2009 | Quality Management Systems - Requirements for Aviation, Space and Defense Organizations |
EN 2832:1993 | Aerospace series - Hydrogen embrittlement of steels - Notched specimen test |
ISO 2082:2017 | Metallic and other inorganic coatings — Electroplated coatings of cadmium with supplementary treatments on iron or steel |
EN ISO 3497 : 2000 | METALLIC COATINGS - MEASUREMENTS OF COATING THICKNESS - X-RAY SPECTROMETRIC METHODS |
ISO 1463:2003 | Metallic and oxide coatings Measurement of coating thickness Microscopical method |
EN ISO 9227:2017 | Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227:2017) |
EN ISO 2082:2017 | Metallic and other inorganic coatings - Electroplated coatings of cadmium with supplementary treatments on iron or steel (ISO 2082:2017) |
ISO 2819:1980 | Metallic coatings on metallic substrates — Electrodeposited and chemically deposited coatings — Review of methods available for testing adhesion |
ISO 3497:2000 | Metallic coatings Measurement of coating thickness X-ray spectrometric methods |
ISO 4520:1981 | Chromate conversion coatings on electroplated zinc and cadmium coatings |
ISO 2178:2016 | Non-magnetic coatings on magnetic substrates Measurement of coating thickness Magnetic method |
EN ISO 2177 : 2004 | METALLIC COATINGS - MEASUREMENT OF COATING THICKNESS - COULOMETRIC METHOD BY ANODIC DISSOLUTION |
ISO 9227:2017 | Corrosion tests in artificial atmospheres — Salt spray tests |
EN 2831:1993 | Aerospace series - Hydrogen embrittlement of steels - Test by slow bending |
ISO 2177:2003 | Metallic coatings — Measurement of coating thickness — Coulometric method by anodic dissolution |
EN 2828:1993 | Aerospace series - Adhesion test for metallic coatings by burnishing |
EN ISO 2178:2016 | Non-magnetic coatings on magnetic substrates - Measurement of coating thickness - Magnetic method (ISO 2178:2016) |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.