• There are no items in your cart

BS EN 280 : 2013

Current

Current

The latest, up-to-date edition.

MOBILE ELEVATING WORK PLATFORMS - DESIGN CALCULATIONS - STABILITY CRITERIA - CONSTRUCTION - SAFETY - EXAMINATIONS AND TESTS

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

01-01-2013

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 List of hazards
5 Safety requirements and/or measures
6 Verification of the safety requirements and/or measures
7 Information for use
Annex A (informative) - Use of MEWPs in wind speeds
        greater than 12,5 m/s (Beaufort-Scale)
Annex B (informative) - Dynamic factors in stability and
        structural calculations
Annex C (normative) - Calculation of wire rope drive
        systems
Annex D (informative) - Calculation example - Wire rope
        drive systems
Annex E (informative) - Calculation examples - factor 'z',
        kerb test
Annex F (normative) - Additional requirements for wireless
        controls and control systems
Annex G (normative) - Dimensions of steps and ladders
Annex H (informative) - Stress history parameters
Annex I (informative) - Fatigue assessment: Relationship
        between S classes in EN 13001-3-1 and B groups in
        DIN 15018
Annex J (normative) - Requirements for Performance Level
        d safety functions
Annex ZA (informative) - Relationship between this
         European Standard and the Essential Requirements
         of EU Directive 2006/42/EC
Bibliography

Describes safety requirements and measures for all types and sizes of Mobile Elevating Work Platform (MEWP, see 3.1) intended to move persons to working positions where they are carrying out work from the work platform (WP) with the intention that persons are getting on and off the work platform only at access positions at ground level or on the chassis.

Committee
MHE/12
DevelopmentNote
Supersedes BS 7171(1989). (09/2001) Supersedes 88/74145 DC. (09/2004) Supersedes 09/30176076 DC. (09/2009) Supersedes 09/30201429 DC. (08/2013) 2013 Edition Re-Issued in September 2015 & incorporates AMD 1 2015.Supersedes 14/30295883 DC. (09/2015)
DocumentType
Standard
Pages
112
PublisherName
British Standards Institution
Status
Current
Supersedes

BS 8460:2017 Code of practice for the safe use of MEWPS
BS 7981:2017 Code of practice for the installation, maintenance, thorough examination and safe use of mast climbing work platforms (MCWPs)
BS PAS 51(2004) : 2004 GUIDE TO INDUSTRY BEST PRACTICE FOR ORGANIZING OUTDOOR EVENTS
17/30341837 DC : 0 BS 8460 - CODE OF PRACTICE FOR THE SAFE USE OF MEWPS
05/30137479 DC : DRAFT AUG 2005 BS 8460 - SAFE USE OF MEWPS - CODE OF PRACTICE
BS 7121-4:2010 Code of practice for safe use of cranes Lorry loaders
17/30342358 DC : 0 BS 7981 - CODE OF PRACTICE FOR THE INSTALLATION, MAINTENANCE, THOROUGH EXAMINATION AND SAFE USE OF MAST CLIMBING WORK PLATFORMS (MCWPS)
BS 8460:2005 Safe use of MEWPs Code of practice
16/30327082 DC : DRAFT MAR 2016 BS 8620 - LOW-LEVEL WORK PLATFORM WITH ONE WORKING PLATFORM WITH SIDE PROTECTION FOR USE BY ONE PERSON WITH A MAXIMUM WORKING PLATFORM HEIGHT NO GREATER THAN 2.5 M - SPECIFICATION
BS 8620:2016 Low level work platform with one working platform with side protection for use by one person with a maximum working platform height no greater than 2.5 m. Specification
BS PAS 250(2012) : 2012 LOW-LEVEL WORK PLATFORM WITH ONE WORKING PLATFORM WITH SIDE PROTECTION FOR USE BY ONE PERSON WITH A MAXIMUM WORKING PLATFORM HEIGHT OF LESS THAN 2.5 M - SPECIFICATION

ISO 2408:2017 Steel wire ropes — Requirements
EN 12385-4:2002+A1:2008 Steel wire ropes - Safety - Part 4: Stranded ropes for general lifting applications
ISO 4302:2016 Cranes — Wind load assessment
EN 1726-2:2000 Safety of Industrial Trucks - Self-propelled trucks up to and including 10000 kg capacity and tractors with a drawbar pull up to and including 20000 N - Part 2: Additional requirements for trucks with elevating operator position and trucks specifically designed to travel with elevated loads
ISO/TR 23849:2010 Guidance on the application of ISO 13849-1 and IEC 62061 in the design of safety-related control systems for machinery
ISO 4301-4:1989 Cranes and related equipment — Classification — Part 4: Jib cranes
EN 349:1993+A1:2008 Safety of machinery - Minimum gaps to avoid crushing of parts of the human body
IEC 60204-1:2016 Safety of machinery - Electrical equipment of machines - Part 1: General requirements
EN ISO 13850:2015 Safety of machinery - Emergency stop function - Principles for design (ISO 13850:2015)
EN 60068-2-64:2008 ENVIRONMENTAL TESTING - PART 2-64: TESTS - TEST FH: VIBRATION, BROADBAND RANDOM AND GUIDANCE
ISO 4308-2:1988 Cranes and lifting appliances Selection of wire ropes Part 2: Mobile cranes Coefficient of utilization
EN 528:2008 Rail dependent storage and retrieval equipment - Safety requirements
EN 1756-1:2001+A1:2008 Tail lifts - Platform lifts for mounting on wheeled vehicles - Safety requirements - Part 1: Tail lifts for goods
IEC 60204-32:2008 Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines
EN 81-1:1998+A3:2009 Safety rules for the construction and installation of lifts - Part 1: Electric lifts
EN ISO 13857:2008 Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008)
IEC 60068-2-64:2008 Environmental testing - Part 2-64: Tests - Test Fh: Vibration, broadband random and guidance
ISO 12100:2010 Safety of machinery — General principles for design — Risk assessment and risk reduction
EN 1570-1:2011+A1:2014 Safety requirements for lifting tables - Part 1: Lifting tables serving up to two fixed landings
EN 60204-32:2008 Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines
ISO 4309:2010 Cranes Wire ropes Care and maintenance, inspection and discard
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
ISO 4305:2014 Mobile cranes — Determination of stability
EN 15746-1:2010+A1:2011 Railway applications - Track - Road-rail machines and associated equipment - Part 1: Technical requirements for running and working
EN 62061:2005/A2:2015 SAFETY OF MACHINERY - FUNCTIONAL SAFETY OF SAFETY-RELATED ELECTRICAL, ELECTRONIC AND PROGRAMMABLE ELECTRONIC CONTROL SYSTEMS (IEC 62061:2005/A2:2015)
ISO 8087:1985 Mobile cranes Drum and sheave sizes
EN 81-2 : 1998 + A3 2009 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 2: HYDRAULIC LIFTS
ISO 13849-2:2012 Safety of machinery — Safety-related parts of control systems — Part 2: Validation
EN 1756-2:2004+A1:2009 Tail lifts - Platform lifts for mounting on wheeled vehicles - Safety requirements - Part 2: Tail lifts for passengers
EN 14033-2:2017 Railway applications - Track - Railbound construction and maintenance machines - Part 2: Technical requirements for travelling and working
EN 14033-1:2017 Railway applications - Track - Railbound construction and maintenance machines - Part 1: Technical requirements for running
EN 1915-2:2001+A1:2009 Aircraft ground support equipment - General requirements - Part 2: Stability and strength requirements, calculations and test methods
EN 12159:2012 Builders hoists for persons and materials with vertically guided cages
ISO 13857:2008 Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs
EN ISO 12100:2010 Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010)
ISO 2631-1:1997 Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 1: General requirements
ISO 3864-1:2011 Graphical symbols Safety colours and safety signs Part 1: Design principles for safety signs and safety markings
EN ISO 13849-2:2012 Safety of machinery - Safety-related parts of control systems - Part 2: Validation (ISO 13849-2:2012)
BS 2573-2:1980 Rules for the design of cranes Specification for classification, stress calculations and design of mechanisms
EN ISO 13849-1:2015 Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015)
ISO 13850:2015 Safety of machinery Emergency stop function Principles for design
EN 1915-1:2013 Aircraft ground support equipment - General requirements - Part 1: Basic safety requirements
EN 1808:2015 Safety requirements for suspended access equipment - Design calculations, stability criteria, construction - Examinations and tests
EN 15955-1 : 2013 RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING AND WORKING
EN 1495:1997+A2:2009/AC:2010 LIFTING PLATFORMS - MAST CLIMBING WORK PLATFORMS
IEC 62061:2005+AMD1:2012+AMD2:2015 CSV Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems
EN 1777:2010 Hydraulic platforms (HPs) for fire fighting and rescue services - Safety requirements and testing
ISO 13849-1:2015 Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design
EN 15954-1 : 2013 RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING AND WORKING
EN 60204-1 : 2006 COR 2010 SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS

View more information
US$356.96
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.