BS EN 4702-03:2017
Current
The latest, up-to-date edition.
Hardcopy , PDF
English
10-25-2017
European foreword
1 Scope
2 Normative references
3 Requirements
4 Designation
5 Marking
6 Quality assurance
7 Technical Specification
Annex A (normative) - Material
Bibliography
Defines the dimensions, mass, tolerances and static values of stud - quick-release and locking for use in fuselage interior equipment and non-structural or secondary structural area.
This European Standard specifies the dimensions, mass, tolerances and static values of stud – quick-release and locking for use in fuselage interior equipment and non-structural or secondary structural area.
Committee |
ACE/12
|
DevelopmentNote |
Supersedes 12/30263853 DC. (11/2017)
|
DocumentType |
Standard
|
Pages |
18
|
PublisherName |
British Standards Institution
|
Status |
Current
|
Supersedes |
Standards | Relationship |
EN 4702-03 : 2017 | Identical |
EN 9100:2009 | Quality Management Systems - Requirements for Aviation, Space and Defense Organizations |
ISO 75-1:2013 | Plastics Determination of temperature of deflection under load Part 1: General test method |
EN ISO 62:2008 | Plastics - Determination of water absorption (ISO 62:2008) |
EN 22768-2:1993 | General tolerances - Part 2: Geometrical tolerances for features without individual tolerance indications (ISO 2768-2:1989) |
EN ISO 180:2000/A2:2013 | PLASTICS - DETERMINATION OF IZOD IMPACT STRENGTH (ISO 180:2000/AMD 2:2013) |
IEC 60250:1969 | Recommended methods for the determination of the permittivity and dielectric dissipation factor of electrical insulating materials at power, audio and radio frequencies including metre wavelengths |
EN ISO 1043-1:2011/A1:2016 | PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 1: BASIC POLYMER AND THEIR SPECIAL CHARACTERISTICS (ISO 1043-1:2011/AMD 1:2016) |
ISO 1133-1:2011 | Plastics Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics Part 1: Standard method |
EN ISO 527-2:2012 | Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012) |
EN 1934:1998 | Thermal performance of buildings - Determination of thermal resistance by hot box method using heat flow meter - Masonry |
ISO 11359-1:2014 | Plastics — Thermomechanical analysis (TMA) — Part 1: General principles |
IEC 62631-3-2:2015 | Dielectric and resistive properties of solid insulating materials - Part 3-2: Determination of resistive properties (DC methods) - Surface resistance and surface resistivity |
EN ISO 75-1:2013 | Plastics - Determination of temperature of deflection under load - Part 1: General test method (ISO 75-1:2013) |
EN ISO 178:2010/A1:2013 | PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010/AMD 1:2013) |
ISO 11359-2:1999 | Plastics Thermomechanical analysis (TMA) Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature |
EN ISO 527-1:2012 | Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1:2012) |
EN ISO 179-1:2010 | Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2010) |
ISO 75-2:2013 | Plastics — Determination of temperature of deflection under load — Part 2: Plastics and ebonite |
EN 62631-3-2:2016 | Dielectric and resistive properties of solid insulating materials - Part 3-2: Determination of resistive properties (DC Methods) - Surface resistance and surface resistivity |
ISO 527-2:2012 | Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics |
ISO 11357-3:2011 | Plastics Differential scanning calorimetry (DSC) Part 3: Determination of temperature and enthalpy of melting and crystallization |
EN ISO 75-2:2013 | Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite (ISO 75-2:2013) |
EN ISO 1133-1:2011 | Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method (ISO 1133-1:2011) |
ISO 180:2000 | Plastics Determination of Izod impact strength |
ISO 2768-2:1989 | GENERAL TOLERANCES - PART 2: GEOMETRICAL TOLERANCES FOR FEATURES WITHOUT INDIVIDUAL TOLERANCE INDICATIONS |
EN ISO 307:2007/A1:2013 | PLASTICS - POLYAMIDES - DETERMINATION OF VISCOSITY NUMBER (ISO 307:2007/AMD 1:2013) |
EN 22768-1:1993 | General tolerances - Part 1: Tolerances for linear and angular dimensions without individual tolerance indications (ISO 2768-1:1989) |
ISO 1183-1:2012 | Plastics Methods for determining the density of non-cellular plastics Part 1: Immersion method, liquid pyknometer method and titration method |
ISO 307:2007 | Plastics Polyamides Determination of viscosity number |
EN 2424:2008 | Aerospace series - Marking of aerospace products |
ISO 179-1:2010 | Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test |
ISO 62:2008 | Plastics Determination of water absorption |
EN 4702-04 : 2017 | AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL AND LINING APPLICATIONS - PART 04: SPRING CLAMP |
ISO 899-1:2017 | Plastics — Determination of creep behaviour — Part 1: Tensile creep |
ISO 178:2010 | Plastics Determination of flexural properties |
ISO 1043-1:2011 | Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics |
EN ISO 1183-1:2012 | Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1:2012) |
EN 4710-01:2015 | Aerospace series - Quick release fastening systems for non-structural applications - Part 01: Technical specification |
ISO 527-1:2012 | Plastics Determination of tensile properties Part 1: General principles |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.