|
IEC 60112 : 4.1
|
METHOD FOR THE DETERMINATION OF THE PROOF AND THE COMPARATIVE TRACKING INDICES OF SOLID INSULATING MATERIALS |
|
EN 60999-2 : 2003
|
CONNECTING DEVICES - ELECTRICAL COPPER CONDUCTORS - SAFETY REQUIREMENTS FOR SCREW-TYPE AND SCREWLESS-TYPE CLAMPING UNITS - PART 2: PARTICULAR REQUIREMENTS FOR CLAMPING UNITS FOR CONDUCTORS ABOVE 35 MM[2] UP TO 300 MM[2] (INCLUDED) |
|
IEC 60364-5-54 : 3.0
|
LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-54: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - EARTHING ARRANGEMENTS AND PROTECTIVE CONDUCTORS |
|
EN 60352-2 : 2006 AMD 1 2013
|
SOLDERLESS CONNECTIONS - PART 2: CRIMPED CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE (IEC 60352-2:2006/A1:2013) |
|
IEC 60352-3 : 1.0
|
SOLDERLESS CONNECTIONS - SOLDERLESS ACCESSIBLE INSULATION DISPLACEMENT CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE |
|
IEC 60068-2-70 : 1.0
|
ENVIRONMENTAL TESTING - TESTS - TEST Xb: ABRASION OF MARKINGS AND LETTERINGS CAUSED BY RUBBING OF FINGERS AND HANDS |
|
EN 60068-2-75 : 2014
|
ENVIRONMENTAL TESTING - PART 2-75: TESTS - TEST EH: HAMMER TESTS (IEC 60068-2-75:2014) |
|
IEC 60364-7-712 : 2.0
|
LOW VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-712: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - SOLAR PHOTOVOLTAIC (PV) POWER SUPPLY SYSTEMS |
|
IEC 60228 : 3.0
|
CONDUCTORS OF INSULATED CABLES |
|
IEC 61984 : 2.0
|
CONNECTORS - SAFETY REQUIREMENTS AND TESTS |
|
IEC 60352-6 : 1.0
|
SOLDERLESS CONNECTIONS - INSULATION PIERCING CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE |
|
IEC 60417-DB-12M : 1.0
|
GRAPHICAL SYMBOLS FOR USE ON EQUIPMENT - 12-MONTH SUBSCRIPTION TO ONLINE DATABASE COMPRISING ALL PARTS OF IEC 60417 |
|
IEC 60068-1 : 7.0
|
ENVIRONMENTAL TESTING - PART 1: GENERAL AND GUIDANCE |
|
IEC 60998-2-3 : 2.0
|
CONNECTING DEVICES FOR LOW-VOLTAGE CIRCUITS FOR HOUSEHOLD AND SIMILAR PURPOSES - PART 2-3: PARTICULAR REQUIREMENTS FOR CONNECTING DEVICES AS SEPARATE ENTITIES WITH INSULATION-PIERCING CLAMPING UNITS |
|
IEC 61215 : 2.0
|
CRYSTALLINE SILICON TERRESTRIAL PHOTOVOLTAIC (PV) MODULES - DESIGN QUALIFICATION AND TYPE APPROVAL |
|
IEC 60364-4-41 : 5.1
|
LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-41: PROTECTION FOR SAFETY - PROTECTION AGAINST ELECTRIC SHOCK |
|
EN 60352-3 : 1994
|
SOLDERLESS CONNECTIONS - SOLDERLESS ACCESSIBLE INSULATION DISPLACEMENT CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE |
|
IEC 61730-2 : 2.0
|
PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 2: REQUIREMENTS FOR TESTING |
|
IEC 60884-1:2002+AMD1:2006+AMD2:2013 CSV
|
PLUGS AND SOCKET-OUTLETS FOR HOUSEHOLD AND SIMILAR PURPOSES - PART 1: GENERAL REQUIREMENTS |
|
EN 60068-1 : 2014
|
ENVIRONMENTAL TESTING - PART 1: GENERAL AND GUIDANCE (IEC 60068-1:2013) |
|
IEC 60364-5-51 : 5.0
|
ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 5-51: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - COMMON RULES |
|
IEC 60999-2 : 2.0
|
CONNECTING DEVICES - ELECTRICAL COPPER CONDUCTORS - SAFETY REQUIREMENTS FOR SCREW-TYPE AND SCREWLESS-TYPE CLAMPING UNITS - PART 2: PARTICULAR REQUIREMENTS FOR CLAMPING UNITS FOR CONDUCTORS ABOVE 35 MM[2] UP TO 300 MM[2] (INCLUDED) |
|
IEC 61210 : 2.0
|
CONNECTING DEVICES - FLAT QUICK-CONNECT TERMINATIONS FOR ELECTRICAL COPPER CONDUCTORS - SAFETY REQUIREMENTS |
|
HD 60364-4-41 : 2017 AMD 11 2017
|
LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-41: PROTECTION FOR SAFETY - PROTECTION AGAINST ELECTRIC SHOCK |
|
EN 61730-1 : 2007 AMD 11 2014
|
PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION (IEC 61730-1:2004, MODIFIED) |
|
HD 60364-5-54 : 2011 AMD 11 2017
|
LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-54: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - EARTHING ARRANGEMENTS AND PROTECTIVE CONDUCTORS |
|
EN 60352-6 : 1997
|
SOLDERLESS CONNECTIONS - INSULATION PIERCING CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE |
|
IEC 60068-2-78 : 2.0B+(REDLINE+VERSION)
|
ENVIRONMENTAL TESTING - PART 2-78: TESTS - TEST CAB: DAMP HEAT, STEADY STATE |
|
EN 60228 : 2005 COR 2005
|
CONDUCTORS OF INSULATED CABLES |
|
EN 60512-1 : 2001
|
ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT - BASIC TESTING PROCEDURES AND MEASURING METHODS - PART 1: GENERAL |
|
HD 60364-5-51 : 2009 AMD 12 2017
|
ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 5-51: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - COMMON RULES |
|
EN 60112 : 2003 AMD 1 2009
|
METHOD FOR THE DETERMINATION OF THE PROOF AND THE COMPARATIVE TRACKING INDICES OF SOLID INSULATING MATERIALS |
|
IEC 60999-1 : 2.0
|
CONNECTING DEVICES - ELECTRICAL COPPER CONDUCTORS - SAFETY REQUIREMENTS FOR SCREW-TYPE AND SCREWLESS-TYPE CLAMPING UNITS - PART 1: GENERAL REQUIREMENTS AND PARTICULAR REQUIREMENTS FOR CLAMPING UNITS FOR CONDUCTORS FROM 0,2 MM[2] UP TO 35 MM[2] (INCLUDED) |
|
EN ISO 6988 : 1994
|
METALLIC AND OTHER NON-ORGANIC COATINGS - SULFUR DIOXIDE TEST WITH GENERAL CONDENSATION OF MOISTURE |
|
EN 60352-5:2012/AC:2014
|
SOLDERLESS CONNECTIONS - PART 5: PRESS-IN CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE (IEC 60352-5:2012) |
|
EN 60512-11-7 : 2003
|
CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 11-7: CLIMATIC TESTS - TEST 11G: FLOWING MIXED GAS CORROSION TEST |
|
EN 61730-2 : 2007 AMD 1 2012
|
PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 2: REQUIREMENTS FOR TESTING (IEC 61730-2:2004/A1:2011) |
|
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV
|
DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) |
|
IEC 60352-5 : 4.0
|
SOLDERLESS CONNECTIONS - PART 5: PRESS-IN CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE |
|
EN 60695-2-10 : 2013
|
FIRE HAZARD TESTING - PART 2-10: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE APPARATUS AND COMMON TEST PROCEDURE (IEC 60695-2-10:2013) |
|
EN 50262 : 1998 AMD 2 2004
|
CABLE GLANDS FOR ELECTRICAL INSTALLATIONS |
|
IEC TR 60943 : 2.1
|
GUIDANCE CONCERNING THE PERMISSIBLE TEMPERATURE RISE FOR PARTS OF ELECTRICAL EQUIPMENT, IN PARTICULAR FOR TERMINALS |
|
IEC 61730-1 : 2.0
|
PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION |
|
IEC 60695-11-10 : 2.0
|
FIRE HAZARD TESTING - PART 11-10: TEST FLAMES - 50 W HORIZONTAL AND VERTICAL FLAME TEST METHODS |
|
IEC 60512-11-7 : 2.0
|
CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 11-7: CLIMATIC TESTS - TEST 11G: FLOWING MIXED GAS CORROSION TEST |
|
EN 60664-1 : 2007
|
INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 1: PRINCIPLES, REQUIREMENTS AND TESTS |
|
HD 60364-7-712 : 2016
|
LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-712: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - PHOTOVOLTAIC (PV) SYSTEMS |
|
EN 60998-2-3 : 0
|
CONNECTING DEVICES FOR LOW-VOLTAGE CIRCUITS FOR HOUSEHOLD AND SIMILAR PURPOSES - PART 2-3: PARTICULAR REQUIREMENTS FOR CONNECTING DEVICES AS SEPARATE ENTITIES WITH INSULATION-PIERCING CLAMPING UNITS (IEC 60998-2-3:2002, MODIFIED) |
|
EN 60068-2-78 : 2013
|
ENVIRONMENTAL TESTING - PART 2-78: TESTS - TEST CAB: DAMP HEAT, STEADY STATE (IEC 60068-2-78:2012) |
|
ISO 4892-2 : 2013(R2018)
|
PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 2: XENON-ARC LAMPS |
|
IEC 60352-2 : 2.1
|
SOLDERLESS CONNECTIONS - PART 2: CRIMPED CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE |
|
EN 61210 : 2010
|
CONNECTING DEVICES - FLAT QUICK-CONNECT TERMINATIONS FOR ELECTRICAL COPPER CONDUCTORS - SAFETY REQUIREMENTS |
|
IEC 60050-826 : 2.0
|
INTERNATIONAL ELECTROTECHNICAL VOCABULARY - PART 826: ELECTRICAL INSTALLATIONS |
|
IEC 60068-2-75 : 2014
|
ENVIRONMENTAL TESTING - PART 2-75: TESTS - TEST EH: HAMMER TESTS |
|
EN 60999-1 : 2000
|
CONNECTING DEVICES - ELECTRICAL COPPER CONDUCTORS - SAFETY REQUIREMENTS FOR SCREW-TYPE AND SCREWLESS-TYPE CLAMPING UNITS - PART 1: GENERAL REQUIREMENTS AND PARTICULAR REQUIREMENTS FOR CLAMPING UNITS FOR CONDUCTORS FROM 0,2 MM[2] UP TO 35 MM[2] (INCLUDED) |
|
EN 61140 : 2016
|
PROTECTION AGAINST ELECTRIC SHOCK - COMMON ASPECTS FOR INSTALLATION AND EQUIPMENT (IEC 61140:2016) |
|
EN 60352-4 : 94 AMD 1 2000
|
SOLDERLESS CONNECTIONS - PART 4: SOLDERLESS NON-ACCESSIBLE INSULATION DISPLACEMENT CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE |
|
EN 61984 : 2009
|
CONNECTORS - SAFETY REQUIREMENTS AND TESTS |
|
EN 60695-11-10 : 2013 COR 2014
|
FIRE HAZARD TESTING - PART 11-10: TEST FLAMES - 50 W HORIZONTAL AND VERTICAL FLAME TEST METHODS (IEC 60695-11-10:2013) |
|
EN 60529 : 1991 COR 2016
|
DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
|
EN 60068-2-70 : 1996
|
ENVIRONMENTAL TESTING - PART 2: TESTS - TEST XB: ABRASION OF MARKINGS AND LETTERINGS CAUSED BY RUBBING OF FINGERS AND HANDS (IEC 60068-2-70:1995) |
|
IEC 60060-1 : 3.0
|
HIGH-VOLTAGE TEST TECHNIQUES - PART 1: GENERAL DEFINITIONS AND TEST REQUIREMENTS |
|
IEC 60512-1 : 4.0
|
CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 1: GENERAL |
|
EN 60352-7 : 2002
|
SOLDERLESS CONNECTIONS - PART 7: SPRING CLAMP CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE |
|
IEC 61140 : 4.0:2016
|
PROTECTION AGAINST ELECTRIC SHOCK - COMMON ASPECTS FOR INSTALLATIONS AND EQUIPMENT |
|
IEC 60068-2-14 : 6.0
|
ENVIRONMENTAL TESTING - PART 2-14: TESTS - TEST N: CHANGE OF TEMPERATURE |
|
IEC 60309-1 : 4.2
|
PLUGS, SOCKET-OUTLETS AND COUPLERS FOR INDUSTRIAL PURPOSES - PART 1: GENERAL REQUIREMENTS |
|
IEC 60695-2-10 : 2.0 : 2013
|
FIRE HAZARD TESTING - PART 2-10: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE APPARATUS AND COMMON TEST PROCEDURE |
|
IEC TR 60664-2-1 : 2.0
|
INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 2-1: APPLICATION GUIDE - EXPLANATION OF THE APPLICATION OF THE IEC 60664 SERIES, DIMENSIONING EXAMPLES AND DIELECTRIC TESTING |
|
IEC 60664-1 : 2.0
|
INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 1: PRINCIPLES, REQUIREMENTS AND TESTS |
|
EN ISO 4892-2 : 2013
|
PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 2: XENON-ARC LAMPS (ISO 4892-2:2013) |
|
ISO 6988 : 1985(R2016)
|
METALLIC AND OTHER NON-ORGANIC COATINGS - SULFUR DIOXIDE TEST WITH GENERAL CONDENSATION OF MOISTURE |
|
EN 60068-2-14 : 2009
|
ENVIRONMENTAL TESTING - PART 2-14: TESTS - TEST N: CHANGE OF TEMPERATURE |
|
IEC 60050-581 : 2.0
|
INTERNATIONAL ELECTROTECHNICAL VOCABULARY - PART 581: ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT |
|
EN 61215 : 2005
|
CRYSTALLINE SILICON TERRESTRIAL PHOTOVOLTAIC (PV) MODULES - DESIGN QUALIFICATION AND TYPE APPROVAL |
|
IEC 60352-7 : 1.0
|
SOLDERLESS CONNECTIONS - PART 7: SPRING CLAMP CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE |
|
EN 60309-1 : 99 AMD 1/COR 2014
|
PLUGS, SOCKET-OUTLETS AND COUPLERS FOR INDUSTRIAL PURPOSES - PART 1: GENERAL REQUIREMENTS (IEC 60309-1:1999/A2:2012) |