|
IEC 60811-501 : 1.0
|
ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 501: MECHANICAL TESTS - TESTS FOR DETERMINING THE MECHANICAL PROPERTIES OF INSULATING AND SHEATHING COMPOUNDS |
|
ISO 14572 : 2011(R2017)
|
ROAD VEHICLES - ROUND, SHEATHED, 60 V AND 600 V SCREENED AND UNSCREENED SINGLE- OR MULTI-CORE CABLES - TEST METHODS AND REQUIREMENTS FOR BASIC- AND HIGH-PERFORMANCE CABLES |
|
EN 61851-1 : 2011
|
ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 1: GENERAL REQUIREMENTS |
|
IEC 60811-509 : 1.1
|
ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 509: MECHANICAL TESTS - TEST FOR RESISTANCE OF INSULATIONS AND SHEATHS TO CRACKING (HEAT SHOCK TEST) |
|
EN 50289-4-17 : 2015
|
COMMUNICATION CABLES - SPECIFICATIONS FOR TEST METHODS - PART 4-17: TEST METHODS FOR UV RESISTANCE EVALUATION OF THE SHEATH OF ELECTRICAL AND OPTICAL FIBRE CABLE |
|
ISO 4892-1 : 2016
|
PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE |
|
EN 60719 : 1993
|
CALCULATION OF THE LOWER AND UPPER LIMITS FOR THE AVERAGE OUTER DIMENSIONS OF CABLES WITH CIRCULAR COPPER CONDUCTORS AND OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V |
|
IEC 60811-507 : 1.0
|
ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 507: MECHANICAL TESTS - HOT SET TEST FOR CROSS-LINKED MATERIALS |
|
IEC 60811-506 : 1.0
|
ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 506: MECHANICAL TESTS - IMPACT TEST AT LOW TEMPERATURE FOR INSULATIONS AND SHEATHS |
|
IEC 60228 : 3.0
|
CONDUCTORS OF INSULATED CABLES |
|
EN 60811-503 : 2012
|
ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 503: MECHANICAL TESTS - SHRINKAGE TEST FOR SHEATHS (IEC 60811-503:2012) |
|
EN 228 : 2012 + A1 2017
|
AUTOMOTIVE FUELS - UNLEADED PETROL - REQUIREMENTS AND TEST METHODS |
|
IEC 60811-505 : 1.0
|
ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 505: MECHANICAL TESTS - ELONGATION AT LOW TEMPERATURE FOR INSULATIONS AND SHEATHS |
|
IEC 60811-503 : 1.0
|
ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 503: MECHANICAL TESTS - SHRINKAGE TEST FOR SHEATHS |
|
EN ISO 4892-1 : 2016
|
PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE (ISO 4892-1:2016) |
|
EN 60811-505 : 2012
|
ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 505: MECHANICAL TESTS - ELONGATION AT LOW TEMPERATURE FOR INSULATIONS AND SHEATHS (IEC 60811-505:2012) |
|
IEC 60811-504 : 1.0
|
ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 504: MECHANICAL TESTS - BENDING TESTS AT LOW TEMPERATURE FOR INSULATION AND SHEATHS |
|
EN 60811-504 : 2012
|
ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 504: MECHANICAL TESTS - BENDING TESTS AT LOW TEMPERATURE FOR INSULATION AND SHEATHS (IEC 60811-504:2012) |
|
HD 605 : S2 COR 2010
|
ELECTRIC CABLES - ADDITIONAL TEST METHODS |
|
EN 60811-501 : 2012
|
ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 501: MECHANICAL TESTS - TESTS FOR DETERMINING THE MECHANICAL PROPERTIES OF INSULATING AND SHEATHING COMPOUNDS (IEC 60811-501:2012) |
|
EN 60228 : 2005 COR 2005
|
CONDUCTORS OF INSULATED CABLES |
|
IEC 60811-401 : 1.1
|
ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 401: MISCELLANEOUS TESTS - THERMAL AGEING METHODS - AGEING IN AN AIR OVEN |
|
EN 60332-1-2 : 2004 AMD 11 2016
|
TESTS ON ELECTRIC AND OPTICAL FIBRE CABLES UNDER FIRE CONDITIONS - PART 1-2: TEST FOR VERTICAL FLAME PROPAGATION FOR A SINGLE INSULATED WIRE OR CABLE - PROCEDURE FOR 1 KW PRE-MIXED FLAME (IEC 60332-1-2:2004/A1:2015) |
|
IEC 60332-1-2 : 1.1
|
TESTS ON ELECTRIC AND OPTICAL FIBRE CABLES UNDER FIRE CONDITIONS - PART 1-2: TEST FOR VERTICAL FLAME PROPAGATION FOR A SINGLE INSULATED WIRE OR CABLE - PROCEDURE FOR 1 KW PRE-MIXED FLAME |
|
IEC 60719 : 2.0
|
CALCULATION OF THE LOWER AND UPPER LIMITS FOR THE AVERAGE OUTER DIMENSIONS OF CABLES WITH CIRCULAR COPPER CONDUCTORS AND OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V |
|
EN 60811-506 : 2012
|
ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 506: MECHANICAL TESTS - IMPACT TEST AT LOW TEMPERATURE FOR INSULATIONS AND SHEATHS (IEC 60811-506:2012) |
|
EN 50525-1 : 2011
|
ELECTRIC CABLES - LOW VOLTAGE ENERGY CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V (U[0]/U) - PART 1: GENERAL REQUIREMENTS |
|
HD 308 : 200S2
|
IDENTIFICATION OF CORES IN CABLES AND FLEXIBLE CORDS |
|
IEC 60811-508 : 1.1
|
ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 508: MECHANICAL TESTS - PRESSURE TEST AT HIGH TEMPERATURE FOR INSULATION AND SHEATHS |
|
IEC 62230 : 1.1
|
ELECTRIC CABLES - SPARK-TEST METHOD |
|
ISO 22241-1 : 2006(R2009)
|
DIESEL ENGINES - NO[X] REDUCTION AGENT AUS 32 - PART 1: QUALITY REQUIREMENTS |
|
EN 60811-404 : 2012
|
ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 404: MISCELLANEOUS TESTS - MINERAL OIL IMMERSION TESTS FOR SHEATHS (IEC 60811-404:2012) |
|
ISO 4892-2 : 2013(R2018)
|
PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 2: XENON-ARC LAMPS |
|
EN 60811-403 : 2012
|
ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 403: MISCELLANEOUS TESTS - OZONE RESISTANCE TEST ON CROSS-LINKED COMPOUNDS (IEC 60811-403:2012) |
|
IEC 60811-404 : 1.0
|
ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 404: MISCELLANEOUS TESTS - MINERAL OIL IMMERSION TESTS FOR SHEATHS |
|
EN 50395 : 2005 AMD 1 2011
|
ELECTRICAL TEST METHODS FOR LOW VOLTAGE ENERGY CABLES |
|
EN 50565-1 : 2014
|
ELECTRIC CABLES - GUIDE TO USE FOR CABLES WITH A RATED VOLTAGE NOT EXCEEDING 450/750 V (U[0]/U) - PART 1: GENERAL GUIDANCE |
|
EN 60811-507 : 2012
|
ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 507: MECHANICAL TESTS - HOT SET TEST FOR CROSS-LINKED MATERIALS (IEC 60811-507:2012) |
|
EN 62230 : 2007 AMD 1 2014
|
ELECTRIC CABLES - SPARK-TEST METHOD (IEC 62230:2006/A1:2013) |
|
ISO 48 : 2010
|
RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF HARDNESS (HARDNESS BETWEEN 10 IRHD AND 100 IRHD) |
|
EN 50334 : 2001
|
MARKING BY INSCRIPTION FOR THE IDENTIFICATION OF CORES OF ELECTRIC CABLES |
|
EN 50289-1-5 : 2001
|
COMMUNICATION CABLES - SPECIFICATIONS FOR TEST METHODS - PART 1-5: ELECTRICAL TEST METHODS - CAPACITANCE |
|
IEC 60445 : 6.0
|
BASIC AND SAFETY PRINCIPLES FOR MAN-MACHINE INTERFACE, MARKING AND IDENTIFICATION - IDENTIFICATION OF EQUIPMENT TERMINALS, CONDUCTOR TERMINATIONS AND CONDUCTORS |
|
EN ISO 4892-2 : 2013
|
PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 2: XENON-ARC LAMPS (ISO 4892-2:2013) |
|
EN 50396 : 2005 AMD 1 2011
|
NON ELECTRICAL TEST METHODS FOR LOW VOLTAGE ENERGY CABLES |
|
IEC 61851-1 : 3.0
|
ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 1: GENERAL REQUIREMENTS |
|
IEC 60811-403 : 1.0
|
ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 403: MISCELLANEOUS TESTS - OZONE RESISTANCE TEST ON CROSS-LINKED COMPOUNDS |