• There are no items in your cart

BS EN 50636-2-92:2014

Current
Current

The latest, up-to-date edition.

Household and similar electrical appliances. Safety Particular requirements for pedestrian-controlled mains-operated lawn scarifiers and aerators
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

06-30-2014

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 General requirement
5 General conditions for the tests
6 Classification
7 Marking and instructions
8 Protection against access to live parts
9 Starting of motor-operated appliances
10 Power input and current
11 Heating
12 Void
13 Leakage current and electric strength at operating
   temperature
14 Transient overvoltages
15 Moisture resistance
16 Leakage current and electric strength
17 Overload protection of transformers and associated
   circuits
18 Endurance
19 Abnormal operation
20 Stability and mechanical hazards
21 Mechanical strength
22 Construction
23 Internal wiring
24 Components
25 Supply connection and external flexible cords
26 Terminals for external conductors
27 Provision for earthing
28 Screws and connections
29 Clearances, creepage distances and solid insulation
30 Resistance to heat and fire
31 Resistance to rusting
32 Radiation, toxicity and similar hazards
Annex AA (normative) - Safety signs and symbols
Annex BB (informative) - Safety Instructions
Annex CC (normative) - Vibration
Annex DD (normative) - Noise test code - Engineering method
         (grade 2)
Annex EE (informative) - Example of a material and construction
         fulfilling the requirements for an artificial surface
Annex FF (normative) - Base
Annex ZZ (informative) - Coverage of Essential Requirements of
         EU Directives
Bibliography

Defines the safety of pedestrian-controlled mains-operated electric lawn scarifiers and aerators.

This clause of Part 1 is replaced by the following.

This European Standard specifies safety requirements and their verification for the design and construction of pedestrian controlled walk-behind mains operated scarifiers and aerators, hereinafter referred to as ‘machine(s)’, which are designed for re-generating lawns by, for instance, combing out grass, thatch and moss or cutting vertically into the lawn face using tines which rotate about a horizontal axis. This standard applies in conjunction with Part 1.

NOTE 1 Lawn scarifiers are also known as lawn rakes.

This European Standard does not apply to non-powered scarifiers and aerators, battery powered scarifiers and aerators, vertical axis scarifiers and aerators or those aerators which cut into the soil by means of a reciprocating motion and ride-on machines.

This European Standard does not apply to

  • lawnmowers (EN 60335-2-77);

  • lawn trimmers (EN 60335-2-91);

  • lawn edge trimmers (EN 60335-2-91);

  • lawn edgers, flail mowers, sickle-bar mowers or agricultural mowers.

This European Standard is not applicable to aerators/scarifiers which are manufactured before the date of publication of this document.

This European Standard deals with all the significant hazards presented by pedestrian-controlled lawn scarifiers and lawn aerators when they are used as intended and under conditions of misuse which are reasonably foreseeable.

NOTE 2 Combustion engine machines are covered by EN 13684.

Committee
CPL/116
DevelopmentNote
Supersedes BS EN 60335-2-92. (07/2014)
DocumentType
Standard
Pages
66
PublisherName
British Standards Institution
Status
Current
Supersedes

Standards Relationship
EN 50636-2-92:2014 Identical

ISO 7010:2011 Graphical symbols Safety colours and safety signs Registered safety signs
EN 13684:2004+A3:2009 Garden equipment - Pedestrian controlled lawn aerators and scarifiers - Safety
ISO 4871:1996 Acoustics — Declaration and verification of noise emission values of machinery and equipment
IEC 60335-2-91:2008 Household and similar electrical appliances - Safety - Part 2-91: Particular requirements for walk-behind and hand-held lawn trimmers and lawn edge trimmers
ISO 3744:2010 Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane
ISO 354:2003 Acoustics — Measurement of sound absorption in a reverberation room
ISO 20643:2005 Mechanical vibration — Hand-held and hand-guided machinery — Principles for evaluation of vibration emission
EN ISO 3767-1 : 2000 TRACTORS, MACHINERY FOR AGRICULTURE AND FORESTRY, POWERED LAWN AND GARDEN EQUIPMENT - SYMBOLS FOR OPERATOR CONTROLS AND OTHER DISPLAYS - PART 1: COMMON SYMBOLS
ISO/TR 11688-1:1995 Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning
ISO 3767-3:2016 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment Symbols for operator controls and other displays Part 3: Symbols for powered lawn and garden equipment
ISO 2758:2014 Paper Determination of bursting strength
EN ISO 13857:2008 Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008)
ISO 12100:2010 Safety of machinery — General principles for design — Risk assessment and risk reduction
CR 1030-1 : 1995 HAND-ARM VIBRATION - GUIDELINES FOR VIBRATION HAZARDS REDUCTION - PART 1: ENGINEERING METHODS BY DESIGN OF MACHINERY
EN ISO 20643:2008/A1:2012 Mechanical vibration - Hand-held and hand-guided machinery - Principles for evaluation of vibration emission - Amendment 1: Accelerometer positions (ISO 20643:2005/Amd 1:2012)
EN ISO 11201:2010 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010)
EN ISO 3767-3 : 1996 TRACTORS, MACHINERY FOR AGRICULTURE AND FORESTRY, POWERED LAWN AND GARDEN EQUIPMENT - SYMBOLS FOR OPERATOR CONTROLS AND OTHER DISPLAYS - PART 3: SYMBOLS FOR POWERED LAWN AND GARDEN EQUIPMENT
EN ISO 5395-2:2013/A2:2017 GARDEN EQUIPMENT - SAFETY REQUIREMENTS FOR COMBUSTION-ENGINE-POWERED LAWNMOWERS - PART 2: PEDESTRIAN-CONTROLLED LAWNMOWERS (ISO 5395-2:2013/AMD 2:2017)
EN ISO 3767-5 : 1995 TRACTORS, MACHINERY FOR AGRICULTURE AND FORESTRY, POWERED LAWN AND GARDEN EQUIPMENT - SYMBOLS FOR OPERATOR CONTROLS AND OTHER DISPLAYS - PART 5: SYMBOLS FOR MANUAL PORTABLE FORESTRY MACHINERY
EN 60335-2-77:2010 Safety of household and similar appliances - Part 2-77: Particular requirements for pedestrian-controlled walk-behind electrically powered lawn mowers
EN ISO 354:2003 Acoustics - Measurement of sound absorption in a reverberation room (ISO 354:2003)
ISO 3767-1:2016 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment Symbols for operator controls and other displays Part 1: Common symbols
EN 60335-2-91:2003 Household and similar electrical appliances - Safety - Part 2-91: Particular requirements for walk-behind and hand-held lawn trimmers and lawn edge trimmers
EN ISO 3744:2010 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010)
IEC 60335-2-77:2002 Household and similar electrical appliances - Safety - Part 2-77: Particular requirements for pedestrian controlled mains-operated lawnmowers
ISO 13857:2008 Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs
ISO 3767-5:2016 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Symbols for operator controls and other displays — Part 5: Symbols for manual portable forestry machines
EN ISO 12100:2010 Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010)
EN ISO 2758:2014 Paper - Determination of bursting strength (ISO 2758:2014)
ISO 5395-2:2013 Garden equipment — Safety requirements for combustion-engine-powered lawnmowers — Part 2: Pedestrian-controlled lawnmowers
EN ISO 4871:2009 Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996)
EN 60335-1:2012/A13:2017 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED)
ISO 7000:2014 Graphical symbols for use on equipment Registered symbols
EN ISO 11688-1:2009 Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995)
ISO 11201:2010 Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections
ISO 11684:1995 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Safety signs and hazard pictorials — General principles

View more information
US$311.44
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.