• There are no items in your cart

BS EN 60454-2:2007

Current
Current

The latest, up-to-date edition.

Pressure-sensitive adhesive tapes for electrical purposes Methods of test
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

10-31-2007

1 Scope
2 Normative references
3 Conditioning and specimen preparation
4 Determination of thickness
   4.1 Test apparatus
   4.2 Test specimens
   4.3 Procedure
   4.4 Results
5 Determination of width
   5.1 Method A
   5.2 Method B
   5.3 Method C
6 Determination of roll length
   6.1 Principle
   6.2 Method A - Measurement of turns method
   6.3 Method B - Length sensor method
7 Corrosion-related properties
   7.1 General
   7.2 Preparation of water extract for pH and
        conductivity determinations
   7.3 Determination of pH value of water extract
   7.4 Determination of conductivity of water extract
   7.5 Detection of corrosive sulfur
   7.6 Insulation resistance method
   7.7 Visual method
   7.8 Wire tensile strength method
8 Tensile strength and elongation at break
   8.1 Apparatus
   8.2 Test specimens
   8.3 Procedure
   8.4 Results
9 Low-temperature properties
   9.1 Principle
   9.2 Test specimen
   9.3 Procedure
   9.4 Flexibility
   9.5 Electric strength
   9.6 Results
10 Resistance to penetration at elevated temperatures
   10.1 Apparatus
   10.2 Test specimens
   10.3 Procedure
   10.4 Results
11 Adhesion
   11.1 Principle
   11.2 Materials
   11.3 Apparatus
   11.4 Test samples and test pieces
   11.5 Procedure
   11.6 Expression of results
12 Adhesion to backing at low temperatures
   12.1 Test specimens
   12.2 Procedure
   12.3 Results
13 Shear adhesion to backing after liquid immersion
   13.1 Apparatus
   13.2 Test specimens
   13.3 Procedure
   13.4 Results
14 Curing properties of thermosetting adhesive tapes
   14.1 Bond separation during thermal treatment
        (adhesive to backing)
   14.2 Bond separation after thermal treatment
        (adhesion to backing)
15 Flagging tests
   15.1 Principle
   15.2 Apparatus
   15.3 Test specimens
   15.4 Preparation of specimens for test
   15.5 Test conditions
   15.6 Results
16 Water vapor permeability
   16.1 Apparatus
   16.2 Test specimens
   16.3 Procedure
   16.4 Results
17 Electric strength
   17.1 General
   17.2 Test specimens
   17.3 Procedure
   17.4 Results
18 Electric strength after humid conditioning
19 Resistance to flame propagation
   19.1 Principle
   19.2 Apparatus
   19.3 Test specimen
   19.4 Procedure
   19.5 Results
20 Flame test
   20.1 Principle
   20.2 Apparatus
   20.3 Preparation of test specimen
   20.4 Procedure
   20.5 Results
21 Thermal endurance
   21.1 Determination of thermal endurance (based
        on IEC 60216-1 and IEC 60216-2)
   21.2 Voltage breakdown
   21.3 Loss of mass
Annex A (normative) - Rollers to be used in various
        tests
Annex ZA (normative) - Normative references to
         international publications with their
         corresponding European publications
Bibliography

Specifies methods of test for pressure-sensitive adhesive tapes for electrical purposes.

IEC 60454-2:2007 specifies methods of test for pressure-sensitive adhesive tapes for electrical purposes. This revision includes improved text regarding the flame test (Clause 20), the improved text on adhesion (Clause 11) and a new Figures 9a and 9b.

Committee
GEL/15
DevelopmentNote
Supersedes 93/204833 DC (11/2005) Supersedes 05/30076043 DC. (11/2007)
DocumentType
Standard
Pages
46
PublisherName
British Standards Institution
Status
Current
Supersedes

Standards Relationship
UNE-EN 60454-2:1997 Identical
IEC 60454-2:2007 Identical
NF EN 60454-2 : 2013 Identical
I.S. EN 60454-2:2007 Identical
NBN EN 60454-2 : 2008 Identical
SN EN 60454-2 : 1995 Identical
EN 60454-2:2007 Identical
DIN EN 60454-2 : 2008 Identical

BS 7864:1997 Specification for plastics containers for surface coatings
DEFSTAN 75-10/2(2000) : 2000 FILM, PRESSURE-SENSITIVE ADHESIVE, TRANSFER, TYPE QX
DEFSTAN 75-2/4(2004) : 2004 TAPE, PRESSURE-SENSITIVE ADHESIVE (FABRIC)
DEFSTAN 03-28(PT2)/4(2008) : 2008 PHYSICAL VAPOUR DEPOSITION OF METALS - PART 2: PHYSICAL VAPOUR DEPOSITION OF CADMIUM FOR PROTECTION AGAINST CORROSION
DEFSTAN 75-3/3(1999) : 1999 TAPE, PRESSURE-SENSITIVE ADHESIVE (WATER-RESISTANT, TRANSPARENT)
DEFSTAN 81-25/5(2015) : 2015 TAPE, PRESSURE-SENSITIVE ADHESIVE (WATER-RESISTANT FABRIC)
DEFSTAN 81-47/2(1998) : 1998 TAPE, PRESSURE-SENSITIVE ADHESIVE (WATER-RESISTANT FILM)
DEFSTAN 75-5/2(2000) : 2000 TAPE, PRESSURE-SENSITIVE ADHESIVE, TYPE QX (WATER-RESISTANT, ALUMINIUM FOIL) GRADE 1 AND GRADE 2
DEFSTAN 81-25/3(1998) : 1998 TAPE, PRESSURE-SENSITIVE ADHESIVE (WATER-RESISTANT FABRIC)
DEFSTAN 75-2/3(1999) : 1999 TAPE, PRESSURE-SENSITIVE ADHESIVE (FABRIC)
DEFSTAN 75-1/3(1999) : 1999 TAPE, PRESSURE-SENSITIVE ADHESIVE (WATER-RESISTANT, CONFORMABLE)
DEFSTAN 81-25/4(2006) : 2006 TAPE, PRESSURE-SENSITIVE ADHESIVE (WATER-RESISTANT FABRIC)
DEFSTAN 75-1/4(2004) : 2004 TAPE PRESSURE-SENSITIVE ADHESIVE (WATER-RESISTANT, CONFORMABLE)
DEFSTAN 81-145/1(2013) : 2013 TAPE PRESSURE-SENSITIVE ADHESIVE FOR GENERAL PACKAGING
DEFSTAN 03-28(PT1)/4(2008) : 2008 PHYSICAL VAPOUR DEPOSITION OF METALS - PART 1: PHYSICAL VAPOUR DEPOSITION OF ALUMINIUM FOR PROTECTION AGAINST CORROSION
DEFSTAN 75-3/4(2004) : 2004 TAPE PRESSURE-SENSITIVE ADHESIVE (WATER-RESISTANT, TRANSPARENT)
BS 1262:2002 Metal packaging. Round lever-lid metal containers for surface coatings. Specification
BS 8423:2002 Fireguards for fires and heating appliances for domestic use. Specification
DEFSTAN 81-145/2(2015) : 2015 TAPE, PRESSURE-SENSITIVE ADHESIVE FOR GENERAL PACKAGING
BS EN 60454-3-10:1996 Specifications for pressure-sensitive adhesive tapes for electrical purposes. Specifications for individual materials Requirements for cellulose-acetate-butyrate film tapes with rubber thermosetting adhesive
DEFSTAN 75-11/3(2006) : 2006 LABELS, PAPER, SELF-ADHESIVE
SAE AMS 03-28-2 : 2017 PHYSICAL VAPOR DEPOSITION OF METALS: PHYSICAL VAPOR DEPOSITION OF CADMIUM FOR PROTECTION AGAINST CORROSION
BS EN 60454-3-13:1996 Specifications for pressure-sensitive adhesive tapes for electrical purposes. Specifications for individual materials Requirements for combined cellulose-viscose woven fabric tapes, one side covered with a thermoplastic material, the other side with rubber thermosetting adhesive
DEFSTAN 93-47/2(2004) : 2004 PVC SHEET, PRESSURE-SENSITIVE ADHESIVE COATED (TRANSPARENT, FLEXIBLE)
DEFSTAN 81-47/3(2007) : 2007 TAPE, PRESSURE-SENSITIVE ADHESIVE (WATER-RESISTANT FILM)
DEFSTAN 81-47/4(2015) : 2015 TAPE, PRESSURE-SENSITIVE ADHESIVE (WATER-RESISTANT FILM)

IEC 60243-1:2013 Electric strength of insulating materials - Test methods - Part 1: Tests at power frequencies
EN 60216-1:2013 Electrical insulating materials - Thermal endurance properties - Part 1: Ageing procedures and evaluation of test results
ISO 683-13:1974 Heat-treated steels, alloy steels and free-cutting steels Part 13: Wrought stainless steels
ISO 10093:1998 Plastics Fire tests Standard ignition sources
ISO 383:1976 Laboratory glassware — Interchangeable conical ground joints
IEC 60216-2:2005 Electrical insulating materials - Thermal endurance properties - Part 2: Determination of thermal endurance properties of electrical insulating materials - Choice of test criteria
EN 10088-2:2014 STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
EN 60216-3:2006 ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 3: INSTRUCTIONS FOR CALCULATING THERMAL ENDURANCE CHARACTERISTICS
EN 60216-2:2005 Electrical insulating materials - Thermal endurance properties - Part 2: Determination of thermal endurance properties of electrical insulating materials - Choice of test criteria
ISO 3071:2005 Textiles Determination of pH of aqueous extract
IEC 60589:1977 Methods of test for the determination of ionic impurities in electrical insulating materials by extraction with liquids
EN ISO 10093:1998 PLASTICS - FIRE TESTS - STANDARD IGNITION SOURCES
EN 1939 : 2003 SELF ADHESIVE TAPES - DETERMINATION OF PEEL ADHESION PROPERTIES
ISO 468:1982 Surface roughness — Parameters, their values and general rules for specifying requirements
ISO 3599:1976 Vernier callipers reading to 0,1 and 0,05 mm
EN 60426:2007 Electrical insulating materials - Determination of electrolytic corrosion caused by insulating materials - Test methods
EN 60243-1:2013 ELECTRIC STRENGTH OF INSULATING MATERIALS - TEST METHODS - PART 1: TESTS AT POWER FREQUENCIES (IEC 60243-1:2013)
IEC 60426:2007 Electrical insulating materials - Determination of electrolytic corrosion caused by insulating materials - Test methods
EN ISO 3071:2006 Textiles - Determination of pH of aqueous extract (ISO 3071:2005)
ISO 527-3:1995 Plastics Determination of tensile properties Part 3: Test conditions for films and sheets
HD 381 : 200S1 METHODS OF TEST FOR THE DETERMINATION OF IONIC IMPURITIES IN ELECTRICAL INSULATING MATERIALS BY EXTRACTION WITH LIQUIDS
EN ISO 527-3:1995/AC:2002 PLASTICS - DETERMINATION OF TENSILE PROPERTIES - PART 3: TEST CONDITIONS FOR FILMS AND SHEETS
ISO 2194:1991 Industrial screens — Woven wire cloth, perforated plate and electroformed sheet — Designation and nominal sizes of openings
IEC 60216-1:2013 Electrical insulating materials - Thermal endurance properties - Part 1: Ageing procedures and evaluation of test results
IEC 60216-3:2006 Electrical insulating materials - Thermal endurance properties - Part 3: Instructions for calculating thermal endurance characteristics

View more information
US$313.84
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.