HD 323.2.20 : 200S3
|
BASIC ENVIRONMENTAL TESTING PROCEDURES - TESTS - TEST T - SOLDERING
|
IEC 60068-1:2013
|
Environmental testing - Part 1: General and guidance
|
IEC 60068-2-58:2015+AMD1:2017 CSV
|
Environmental testing - Part 2-58: Tests - Test Td: Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD)
|
IEC 60068-2-27:2008
|
Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock
|
IEC 60068-2-20:2008
|
Environmental testing - Part 2-20: Tests - Test T: Test methods for solderability and resistance to soldering heat of devices with leads
|
EN 60068-2-1:2007
|
Environmental testing - Part 2-1: Tests - Test A: Cold
|
IECQ 001002-3:2005
|
IEC QUALITY ASSESSMENT SYSTEM FOR ELECTRONIC COMPONENTS (IECQ) - RULES OF PROCEDURE - PART 3: APPROVAL PROCEDURES
|
IEC 61249-2-7:2002
|
Materials for printed boards and other interconnecting structures - Part 2-7: Reinforced base materials clad and unclad - Epoxide woven E-glass laminated sheet of defined flammability (vertical burning test), copper-clad
|
EN 60068-2-2:2007
|
Environmental testing - Part 2-2: Tests - Test B: Dry heat
|
IEC 60068-2-21:2006
|
Environmental testing - Part 2-21: Tests - Test U: Robustness of terminations and integral mounting devices
|
IEC 60068-2-13:1983
|
Basic environmental testing procedures - Part 2-13: Tests - Test M: Low air pressure
|
EN 60068-1:2014
|
Environmental testing - Part 1: General and guidance
|
EN 61760-1:2006
|
SURFACE MOUNTING TECHNOLOGY - PART 1: STANDARD METHOD FOR THE SPECIFICATION OF SURFACE MOUNTING COMPONENTS (SMDS)
|
IEC 60068-2-11:1981
|
Basic environmental testing procedures - Part 2-11: Tests - Test Ka: Salt mist
|
IEC 61760-1:2006
|
Surface mounting technology - Part 1: Standard method for the specification of surface mounting components (SMDs)
|
EN 61249-2-7:2002/corrigendum:2005
|
MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-7: REINFORCED BASE MATERIALS CLAD AND UNCLAD - EPOXIDE WOVEN E-GLASS LAMINATED SHEET OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD
|
IEC 60410:1973
|
Sampling plans and procedures for inspection by attributes
|
EN 60068-2-27:2009
|
Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock
|
IEC 60294:2012
|
Measurement of the dimensions of a cylindrical component with axial terminations
|
EN 60068-2-21:2006
|
Environmental testing - Part 2-21: Tests - Test U: Robustness of terminations and integral mounting devices
|
IEC 60068-2-2:2007
|
Environmental testing - Part 2-2: Tests - Test B: Dry heat
|
IEC 60062:2016
|
Marking codes for resistors and capacitors
|
EN 60062:2016/AC:2016-12
|
MARKING CODES FOR RESISTORS AND CAPACITORS (IEC 60062:2016/COR1:2016)
|
EN 60068-2-29:1993
|
Environmental testing - Part 2: Tests - Test Eb and guidance: Bump
|
EN 60068-2-78:2013
|
Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state
|
EN 60068-2-13:1999
|
Environmental testing - Part 2: Tests - Test M: Low air pressure
|
EN 60068-2-6:2008
|
Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal)
|
IEC 60068-2-29:1987
|
Environmental testing. Part 2: Tests. Test Eb and guidance: Bump
|
IEC 60717:2012
|
Method for the determination of the space required by capacitors and resistors with unidirectional terminations
|
EN 60068-2-11:1999
|
Environmental testing - Part 2: Tests - Test Ka: Salt mist
|
IEC 60068-2-1:2007
|
Environmental testing - Part 2-1: Tests - Test A: Cold
|
EN 60068-2-30:2005
|
Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
|
IEC 60068-2-14:2009
|
Environmental testing - Part 2-14: Tests - Test N: Change of temperature
|
EN 60068-2-45:1992/A1:1993
|
Environmental testing - Part 2: Tests - Test Xa and guidance: Immersion in cleaning solvents
|
EN 60068-2-14:2009
|
Environmental testing - Part 2-14: Tests - Test N: Change of temperature
|
IEC 60068-2-30:2005
|
Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
|