• There are no items in your cart

BS EN 61249-2-22:2005

Current
Current

The latest, up-to-date edition.

Materials for printed boards and other interconnecting structures Reinforced base materials, clad and unclad - Modified non-halogenated epoxide woven E-glass laminated sheets of defined flammability (vertical burning test), copper-clad
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

08-24-2005

Foreword
1 Scope
2 Normative references
3 Materials and construction
   3.1 Resin system
   3.2 Metal foil
   3.3 Reinforcement
4 Internal marking
5 Electrical properties
6 Non-electrical properties of the copper-clad laminate
   6.1 Appearance of the copper-clad sheet
   6.2 Appearance of the unclad face
   6.3 Laminate thickness
   6.4 Bow and twist
   6.5 Properties related to the copper foil bond
   6.6 Punching and machining
   6.7 Dimensional stability
   6.8 Sheet sizes
   6.9 Cut panels
7 Non-electrical properties of the base material after complete
   removal of the copper foil
   7.1 Appearance of the dielectric base material
   7.2 Flexural strength
   7.3 Flammability
   7.4 Water absorption
   7.5 Measling
   7.6 Glass transition temperature and cure factor
8 Quality assurance
   8.1 Quality system
   8.2 Responsibility for inspection
   8.3 Qualification inspection
   8.4 Quality conformance inspection
   8.5 Certificate of conformance
   8.6 Safety data sheet
9 Packaging and marking
10 Ordering information
Annex A (informative) Engineering information
      A.1 Chemical properties
      A.2 Electrical properties
      A.3 Flammability properties
      A.4 Mechanical properties
      A.5 Physical properties
      A.6 Thermal properties
Annex B (informative) Common laminate constructions
Annex C (informative) Guideline for qualification and conformance
                      inspection
Annex ZA (normative) Normative references to international
                      publications with their corresponding
                      European publications
Bibliography
Tables

Gives requirements for properties of modified non-halogenated epoxide woven E-glass laminated sheet 0,05 mm up to 3,2 mm, of defined flammability (vertical burning test), copper-clad.

This part of IEC 61249 gives requirements for properties of modified non-halogenated epoxide woven E-glass laminated sheet 0,05 mm up to 3,2 mm, of defined flammability (vertical burning test), copper-clad. The flammability rating is achieved through the use of phosphorus compounds and/or aluminium hydroxide fire retardants contained as part of the polymeric structure. The glass transition temperature is defined to be between 150 °C to 190 °C.

Committee
EPL/501
DevelopmentNote
Supersedes 04/30123452 DC. (09/2005)
DocumentType
Standard
Pages
28
PublisherName
British Standards Institution
Status
Current
Supersedes

Standards Relationship
IEC 61249-2-22:2005 Identical
DIN EN 61249-2-22:2005-08 Identical
I.S. EN 61249-2-22:2005 Identical
EN 61249-2-22:2005 Identical
NF EN 61249-2-22 : 2005 Identical
NBN EN 61249-2-22 : 2006 Identical

EN 61249-5-1:1996 Materials for interconnection structures - Part 5: Sectional specification set for conductive foils and films with or without coatings - Section 1: Copper foils (for the manufacture of copper-clad base materials)
ISO 11014-1:1994 Safety data sheet for chemical products Part 1: Content and order of sections
IEC 61249-5-1:1995 Materials for interconnection structures - Part 5: Sectional specification set for conductive foils and films with and without coatings - Section 1: Copper foils (for the manufacture of copper-clad base materials)
ISO 14001:2015 Environmental management systems — Requirements with guidance for use
IEC 60194:2015 Printed board design, manufacture and assembly - Terms and definitions
EN ISO 14001:2015 Environmental management systems - Requirements with guidance for use (ISO 14001:2015)
ISO 9000:2015 Quality management systems — Fundamentals and vocabulary
IEC 61189-2:2006 Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 2: Test methods for materials for interconnection structures
EN ISO 9000:2015 Quality management systems - Fundamentals and vocabulary (ISO 9000:2015)
EN 61189-2:2006 Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 2: Test methods for materials for interconnection structures

View more information
US$222.80
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.