• There are no items in your cart

BS EN 62271-205:2008

Current
Current

The latest, up-to-date edition.

High-voltage switchgear and controlgear Compact switchgear assemblies for rated voltages above 52 kV
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

06-30-2008

1 General
   1.1 Scope
   1.2 Normative references
2 Normal and special service conditions
3 Terms and definitions
   3.1 General terms
   3.2 Compact switchgear assembly
4 Rating
   4.1 Rated voltage (U[r])
   4.2 Rated insulation level
   4.3 Rated frequency (f[r])
   4.4 Rated normal current (I[r]) and temperature
         rise
   4.5 Rated short-time withstand current (I[k])
   4.6 Rated peak withstand current (I[p])
   4.7 Rated duration of short circuit (t[k])
   4.8 Rated supply voltage of closing and opening
         devices and of auxiliary and control
         circuits (U[a])
   4.9 Rated supply frequency of closing and opening
         devices and of auxiliary circuits
5 Design and construction
   5.3 Earthing of switchgear and controlgear
   5.101 Earthing of compact switchgear assemblies
         and their controlgear
   5.102 Pressure relief devices
   5.10 Nameplates
   5.12 Position indication
   5.103 Locking devices for maintenance operation
   5.104 Movement of pressurized devices
   5.105 Isolating distance for maintenance
6 Type tests
   6.1 General
   6.2 Dielectric tests
   6.3 Radio interference voltage (r.i.v.) test
   6.4 Measurement of the resistance of circuits
   6.5 Temperature-rise tests
   6.6 Short-time withstand current and peak withstand
         current tests
   6.101 Mechanical and environmental tests
7 Routine tests
   7.1 Dielectric test on the main circuit
   7.2 Tests on auxiliary and control circuits
   7.3 Measurement of the resistance of the main circuit
   7.101 Functional tests on auxiliary and control circuits
8 Guide to the selection of switchgear and controlgear
   8.101 Guide to the selection of compact switchgear
         assemblies
9 Information to be given with enquiries, tenders and
   orders
10 Transport, storage, installation, operation and
   maintenance
   10.1 Conditions during transport, storage and installation
   10.2 Installation
   10.3 Operation
   10.4 Maintenance
11 Safety
Annex AA (informative) - Explanations of compact switchgear
         assemblies
Annex ZA (normative) - Normative references to international
         publications with their
         corresponding European publications
Annex ZB (informative) - A-deviations
Bibliography

Describes compact switchgear assemblies consisting of at least one switching device directly connected to, or sharing components with, one or more other devices such that there is an interaction between the functions of the individual devices.

This part of IEC 62271 applies to compact switchgear assemblies consisting of at least one switching device directly connected to, or sharing components with, one or more other devices such that there is an interaction between the functions of the individual devices. Such assemblies are made up of devices defined in 1.101 and are designed, tested and supplied for use as a single unit. The interaction between devices may be due to proximity, sharing of components or a combination of both. The assemblies may contain components of air insulated switchgear (AIS) only or a combination of AIS and gas insulated switchgear (GIS), so called mixed technology switchgear (MTS) and may be delivered entirely prefabricated or partially assembled.

Committee
PEL/17
DocumentType
Standard
Pages
28
PublisherName
British Standards Institution
Status
Current

Standards Relationship
EN 62271-205:2008 Identical
IEC 62271-205:2008 Identical
EN 62271-205:2008/corrigendum:2008 Identical

IEC 62271-100:2008+AMD1:2012+AMD2:2017 CSV High-voltage switchgear and controlgear - Part 100: Alternating-current circuit-breakers
EN 60044-2:1999/A2:2003 INSTRUMENT TRANSFORMERS - PART 2: INDUCTIVE VOLTAGE TRANSFORMERS
IEC 60044-7:1999 Instrument transformers - Part 7: Electronic voltage transformers
IEC 61936-1:2010+AMD1:2014 CSV Power installations exceeding 1 kV a.c. - Part 1: Common rules
HD 357 : 200S2 A MODULAR INSTRUMENTATION SYSTEM FOR DATA HANDLING; CAMAC SYSTEM
EN 60265-2:1993/A2:1998 HIGH-VOLTAGE SWITCHES - HIGH-VOLTAGE SWITCHES FOR RATED VOLTAGES OF 52 KV AND ABOVE
IEC 60044-5:2004 Instrument transformers - Part 5: Capacitor voltage transformers
IEC 60044-8:2002 Instrument transformers - Part 8: Electronic current transformers
IEC 62155:2003 Hollow pressurized and unpressurized ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1 000 V
IEC 60099-4:2014 Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems
EN 62155:2003 Hollow pressurized and unpressurized ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1 000 V
EN 60044-5:2004 Instrument transformers - Part 5: Capacitor voltage transformers
IEC 60050-441:1984 International Electrotechnical Vocabulary (IEV) - Part 441: Switchgear, controlgear and fuses
IEC 60044-2:1997+AMD1:2000+AMD2:2002 CSV Instrument transformers - Part 2 : Inductive voltage transformers
EN 62271-203:2012 High-voltage switchgear and controlgear - Part 203: Gas-insulated metal-enclosed switchgear for rated voltages above 52 kV
IEC 60265-2:1988 High-voltage switches. Part 2: High-voltage switches for rated voltages of 52 kV and above
EN 62271-102:2002/AC:2014 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 102: ALTERNATING CURRENT DISCONNECTORS AND EARTHING SWITCHES (IEC 62271-102:2001/A2:2013)
IEC 62271-209:2007 High-voltage switchgear and controlgear - Part 209: Cable connections for gas-insulated metal-enclosed switchgear for rated voltages above 52 kV - Fluid-filled and extruded insulation cables - Fluid-filled and dry-type cable-terminations
IEC TR 62271-300:2006 High-voltage switchgear and controlgear - Part 300: Seismic qualification of alternating current circuit-breakers
EN 60099-4:2014 Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems
EN 61462:2007 Composite hollow insulators - Pressurized and unpressurized insulators for use in electrical equipment with rated voltage greater than 1 000 V - Definitions, test methods, acceptance criteria and design recommendations
IEC 60044-3:2002 Instrument transformers - Part 3: Combined transformers
EN 60044-8:2002 Instrument transformers - Part 8: Electronic current transformers
IEC TR 62063:1999 High-voltage switchgear and controlgear - The use of electronic and associated technologies in auxiliary equipment of switchgear and controlgear
EN 60044-3:2003 Instrument transformers - Part 3: Combined transformers
EN 60044-7:2000 Instrument transformers - Part 7: Electronic voltage transformers
IEC 60044-6:1992 Instrument transformers - Part 6: Requirements for protective current transformers for transient performance
IEC 60044-1:1996+AMD1:2000+AMD2:2002 CSV Instrument transformers - Part 1: Current transformers
IEC 61462:2007 Composite hollow insulators - Pressurized and unpressurized insulators for use in electrical equipment with rated voltage greater than 1 000 V - Definitions, test methods, acceptance criteria and design recommendations
IEC 60137:2017 Insulated bushings for alternating voltages above 1000 V
IEC 62271-203:2011 High-voltage switchgear and controlgear - Part 203: Gas-insulated metal-enclosed switchgear for rated voltages above 52 kV
IEC 62271-1:2017 High-voltage switchgear and controlgear - Part 1: Common specifications for alternating current switchgear and controlgear
EN 62271-209:2007 High-voltage switchgear and controlgear - Part 209: Cable connections for gas-insulated metal-enclosed switchgear for rated voltages above 52 kV - Fluid-filled and extruded insulation cables - Fluid-filled and dry-type cable-terminations
EN 60044-1:1999/A2:2003 INSTRUMENT TRANSFORMERS - PART 1: CURRENT TRANSFORMERS
EN 62271-108:2006 High-voltage switchgear and controlgear - Part 108: High-voltage alternating current disconnecting circuit-breakers for rated voltages of 72,5 kV and above
IEC 62271-108:2005 High-voltage switchgear and controlgear - Part 108: High-voltage alternating current disconnecting circuit-breakers for rated voltages of 72,5 kV and above
IEC 62271-2:2003 High-voltage switchgear and controlgear - Part 2: Seismic qualification for rated voltages of 72,5 kV and above
IEC 62271-102:2001+AMD1:2011+AMD2:2013 CSV High-voltage switchgear and controlgear - Part 102: Alternatingcurrent disconnectors and earthing switches

View more information
US$222.80
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.