ISO 13934-1:2013
|
Textiles — Tensile properties of fabrics — Part 1: Determination of maximum force and elongation at maximum force using the strip method
|
ISO 4892-1:2016
|
Plastics Methods of exposure to laboratory light sources Part 1: General guidance
|
ISO/IEC 17025:2005
|
General requirements for the competence of testing and calibration laboratories
|
ISO 12402-5:2006
|
Personal flotation devices Part 5: Buoyancy aids (level 50) Safety requirements
|
ISO 13934-2:2014
|
Textiles Tensile properties of fabrics Part 2: Determination of maximum force using the grab method
|
ISO 9073-4:1997
|
Textiles Test methods for nonwovens Part 4: Determination of tear resistance
|
ISO 6330:2012
|
Textiles Domestic washing and drying procedures for textile testing
|
89/686/EEC : 1989 AMD 5 2012
|
COUNCIL DIRECTIVE OF 21 DECEMBER 1989 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO PERSONAL PROTECTIVE EQUIPMENT
|
ISO 12402-3:2006
|
Personal flotation devices Part 3: Lifejackets, performance level 150 Safety requirements
|
ISO 2411:2017
|
Rubber- or plastics-coated fabrics — Determination of coating adhesion
|
ISO 188:2011
|
Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests
|
ISO 13938-2:1999
|
Textiles Bursting properties of fabrics Part 2: Pneumatic method for determination of bursting strength and bursting distension
|
ISO 12402-1:2005
|
Personal flotation devices Part 1: Lifejackets for seagoing ships Safety requirements
|
ISO 2062:2009
|
Textiles Yarns from packages Determination of single-end breaking force and elongation at break using constant rate of extension (CRE) tester
|
ISO 12402-2:2006
|
Personal flotation devices Part 2: Lifejackets, performance level 275 Safety requirements
|
ISO 1926:2009
|
Rigid cellular plastics Determination of tensile properties
|
ISO 105-E02:2013
|
Textiles — Tests for colour fastness — Part E02: Colour fastness to sea water
|
ISO 5470-2:2003
|
Rubber- or plastics-coated fabrics Determination of abrasion resistance Part 2: Martindale abrader
|
ISO 12401:2009
|
Small craft — Deck safety harness and safety line — Safety requirements and test methods
|
ISO 7854:1995
|
Rubber- or plastics-coated fabrics Determination of resistance to damage by flexing
|
ISO 1302:2002
|
Geometrical Product Specifications (GPS) Indication of surface texture in technical product documentation
|
ISO 7229:2015
|
Rubber- or plastics-coated fabrics — Measurement of gas permeability
|
ISO 12402-6:2006
|
Personal flotation devices Part 6: Special purpose lifejackets and buoyancy aids Safety requirements and additional test methods
|
ISO 12402-4:2006
|
Personal flotation devices Part 4: Lifejackets, performance level 100 Safety requirements
|
FED-STD-191 Revision A:1978
|
TEXTILE TEST METHODS
|
ISO 105-X12:2016
|
Textiles Tests for colour fastness Part X12: Colour fastness to rubbing
|
ISO 12402-10:2006
|
Personal flotation devices Part 10: Selection and application of personal flotation devices and other relevant devices
|
ISO 3696:1987
|
Water for analytical laboratory use — Specification and test methods
|
ISO 9227:2017
|
Corrosion tests in artificial atmospheres — Salt spray tests
|
ISO 4892-2:2013
|
Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps
|
ISO 139:2005
|
Textiles Standard atmospheres for conditioning and testing
|
ISO 1421:2016
|
Rubber- or plastics-coated fabrics — Determination of tensile strength and elongation at break
|
ISO 105-A02:1993
|
Textiles Tests for colour fastness Part A02: Grey scale for assessing change in colour
|
ISO 12947-2:2016
|
Textiles — Determination of the abrasion resistance of fabrics by the Martindale method — Part 2: Determination of specimen breakdown
|
ISO 13938-1:1999
|
Textiles Bursting properties of fabrics Part 1: Hydraulic method for determination of bursting strength and bursting distension
|
ISO 4674-1:2016
|
Rubber- or plastics-coated fabrics Determination of tear resistance Part 1: Constant rate of tear methods
|
ASTM D 471 : 2016-02
|
TEST METHOD FOR RUBBER PROPERTY - EFFECT OF LIQUIDS
|
ISO 105-B02:2014
|
Textiles Tests for colour fastness Part B02: Colour fastness to artificial light: Xenon arc fading lamp test
|
EN 10088-1:2014
|
Stainless steels - Part 1: List of stainless steels
|