|
ISO/IEC 17025:2005
|
General requirements for the competence of testing and calibration laboratories
|
|
ISO 19840:2012
|
Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Measurement of, and acceptance criteria for, the thickness of dry films on rough surfaces
|
|
ASTM D 870 : 2015
|
Standard Practice for Testing Water Resistance of Coatings Using Water Immersion
|
|
ISO 8502-3:2017
|
Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method)
|
|
ISO 8501-1:2007
|
Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings
|
|
ISO/TS 29001:2010
|
Petroleum, petrochemical and natural gas industries Sector-specific quality management systems Requirements for product and service supply organizations
|
|
ASTM D 512 : 2012
|
Standard Test Methods for Chloride Ion In Water (Withdrawn 2021)
|
|
NACE SP 01 88 : 2006
|
DISCONTINUITY (HOLIDAY) TESTING OF NEW PROTECTIVE COATINGS ON CONDUCTIVE SUBSTRATES
|
|
NACE SP 01 78 : 2007
|
DESIGN, FABRICATION, AND SURFACE FINISH PRACTICES FOR TANKS AND VESSELS TO BE LINED FOR IMMERSION SERVICE
|
|
CFR 29(PTS1900-1910) : 0
|
LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR
|
|
ISO 2808:2007
|
Paints and varnishes Determination of film thickness
|
|
SSPC-SP 11 : 2012
|
POWER-TOOL CLEANING TO BARE METAL
|
|
ASTM D 4541 : 2017 : REDLINE
|
Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers
|
|
ASTM D 4417 : 2014 : REDLINE
|
Standard Test Methods for Field Measurement of Surface Profile of Blast Cleaned Steel
|
|
ASTM F 21 : 2014 : REDLINE
|
Standard Test Method for Hydrophobic Surface Films by the Atomizer Test
|
|
API 653 : 2014
|
TANK INSPECTION, REPAIR, ALTERATION, AND RECONSTRUCTION
|
|
NACE 6G186 : 0
|
SURFACE PREPARATION OF SOLUBLE SALT CONTAMINATED STEEL SUBSTRATES PRIOR TO COATING
|
|
ISO 8502-10:1999
|
Preparation of steel substrates before application of paints and related products Tests for the assessment of surface cleanliness Part 10: Field method for the titrimetric determination of water-soluble chloride
|
|
ASTM D 4285 : 1983 : R2018
|
Standard Test Method for Indicating Oil or Water in Compressed Air
|
|
NACE 11 : 2003
|
THIN-FILM ORGANIC LININGS APPLIED IN NEW CARBON STEEL PROCESS VESSELS
|
|
ISO 8501-3:2006
|
Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 3: Preparation grades of welds, edges and other areas with surface imperfections
|
|
SSPC-QP 1 : 2012
|
STANDARD PROCEDURE FOR EVALUATING THE QUALIFICATIONS OF IINDUSTRIAL/MARINE PAINTING CONTRACTORS (FIELD APPLICATION TO COMPLEX INDUSTRIAL AND MARINE STEEL STRUCTURES)
|
|
NACE 6A192 : 2000
|
DEHUMIDIFICATION AND TEMPERATURE CONTROL DURING SURFACE PREPARATION, APPLICATION, AND CURING FOR COATINGS/LININGS OF STEEL TANKS, VESSELS, AND OTHER ENCLOSED SPACES
|
|
ASTM D 4414 : 1995
|
Standard Practice for Measurement of Wet Film Thickness by Notch Gages
|
|
SSPC-PA 6 : 2002
|
FIBERGLASS-REINFORCED PLASTIC (FRP) LININGS APPLIED TO BOTTOMS OF CARBON STEEL ABOVEGROUND STORAGE TANKS
|
|
ASTM D 610 : 2008
|
Standard Practice for Evaluating Degree of Rusting on Painted Steel Surfaces
|
|
NACE TM 01 74 : 2002
|
LABORATORY METHODS FOR THE EVALUATION OF PROTECTIVE COATINGS AND LINING MATERIALS ON METALLIC SUBSTRATES IN IMMERSION SERVICE
|
|
ISO 4628-3:2016
|
Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 3: Assessment of degree of rusting
|
|
ISO 4624:2016
|
Paints and varnishes — Pull-off test for adhesion
|
|
SSPC-GUIDE 15 : 2013
|
FIELD METHODS FOR EXTRACTION AND ANALYSIS OF SOLUBLE SALTS ON STEEL AND OTHER NONPOROUS SUBSTRATES
|
|
API 2217A : 2009
|
SAFE WORK IN INERT CONFINED SPACES IN THE PETROLEUM AND PETROCHEMICAL INDUSTRIES
|
|
ISO 11127-7:2011
|
Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 7: Determination of water-soluble chlorides
|
|
ISO 9004:2009
|
Managing for the sustained success of an organization A quality management approach
|
|
SSPC-AB 1 : 2015
|
MINERAL AND SLAG ABRASIVES
|
|
NACE 10 : 2002
|
FIBERGLASS-REINFORCED PLASTIC (FRP) LININGS APPLIED TO BOTTOMS OF CARBON STEEL ABOVEGROUND STORAGE TANKS
|
|
ISO 29601:2011
|
Paints and varnishes Corrosion protection by protective paint systems Assessment of porosity in a dry film
|
|
ASTM D 790 : 2017 : REDLINE
|
Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
|
|
ISO 10474:2013
|
Steel and steel products — Inspection documents
|
|
EN 10204:2004
|
Metallic products - Types of inspection documents
|
|
ISO 80000-1:2009
|
Quantities and units — Part 1: General
|
|
ISO 3673-1:1996
|
Plastics Epoxy resins Part 1: Designation
|
|
ASTM G 42 : 2011 : REDLINE
|
TEST METHOD FOR CATHODIC DISBONDING OF PIPELINE COATINGS SUBJECTED TO ELEVATED TEMPERATURES
|
|
API 2015 : 2014
|
REQUIREMENTS FOR SAFE ENTRY AND CLEANING OF PETROLEUM STORAGE TANKS
|
|
ISO 9001:2015
|
Quality management systems — Requirements
|
|
ISO 2812-1:2017
|
Paints and varnishes — Determination of resistance to liquids — Part 1: Immersion in liquids other than water
|
|
SSPC-AB 2 : 2015
|
CLEANLINESS OF RECYCLED FERROUS METALLIC ABRASIVES
|
|
ISO 12944-3:2017
|
Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 3: Design considerations
|
|
ASTM D 5420 : 2016 : REDLINE
|
Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact)
|
|
ISO 9000:2015
|
Quality management systems — Fundamentals and vocabulary
|
|
ISO 8502-6:2006
|
Preparation of steel substrates before application of paints and related products Tests for the assessment of surface cleanliness Part 6: Extraction of soluble contaminants for analysis The Bresle method
|
|
ISO 8502-9:1998
|
Preparation of steel substrates before application of paints and related products Tests for the assessment of surface cleanliness Part 9: Field method for the conductometric determination of water-soluble salts
|
|
SSPC-PA 8 : 2003
|
THIN-FILM ORGANIC LININGS APPLIED IN NEW CARBON STEEL PROCESS VESSELS
|
|
API 650 : 2013
|
WELDED TANKS FOR OIL STORAGE
|
|
SSPC-SP 5 : 2015
|
WHITE METAL BLAST CLEANING
|
|
ISO 8504-2:2000
|
Preparation of steel substrates before application of paints and related products Surface preparation methods Part 2: Abrasive blast-cleaning
|
|
SSPC-TR 3 : 2000
|
DEHUMIDIFICATION AND TEMPERATURE CONTROL DURING SURFACE PREPARATION, APPLICATION, AND CURING FOR COATINGS/LININGS OF STEEL TANKS, VESSELS, AND OTHER ENCLOSED SPACES
|
|
ISO 8502-11:2006
|
Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 11: Field method for the turbidimetric determination of water-soluble sulfate
|
|
ISO Guide 31:2015
|
Reference materials — Contents of certificates, labels and accompanying documentation
|
|
ASTM D 522 : 1993 : REV A
|
Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings
|
|
NACE RP 02 87 : 2002
|
FIELD MEASUREMENT OF SURFACE PROFILE OF ABRASIVE BLAST-CLEANED STEEL SURFACES USING A REPLICA TAPE
|
|
ASTM D 3359 : 2017 : REDLINE
|
Standard Test Methods for Rating Adhesion by Tape Test
|
|
SSPC-GUIDE 12 : 2016
|
GUIDE TO ILLUMINATION OF INDUSTRIAL COATING PROJECTS
|
|
ISO 8504-3:1993
|
Preparation of steel substrates before application of paints and related products Surface preparation methods Part 3: Hand- and power-tool cleaning
|
|
ISO 4628-2:2016
|
Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 2: Assessment of degree of blistering
|
|
API 652 : 2014
|
LININGS OF ABOVEGROUND PETROLEUM STORAGE TANK BOTTOMS
|
|
ISO 7027:1999
|
Water quality Determination of turbidity
|
Important note : All end users must be registered with an Account prior to user licenses being assigned.