|
ISO 8871-1:2003
|
Elastomeric parts for parenterals and for devices for pharmaceutical use Part 1: Extractables in aqueous autoclavates
|
|
ISO 7619-1:2010
|
Rubber, vulcanized or thermoplastic Determination of indentation hardness Part 1: Durometer method (Shore hardness)
|
|
ISO 720:1985
|
Glass Hydrolytic resistance of glass grains at 121 degrees C Method of test and classification
|
|
ISO 9626:2016
|
Stainless steel needle tubing for the manufacture of medical devices — Requirements and test methods
|
|
DIN 13097-4:2009-08
|
HYPODERMIC NEEDLES - PART 4: POINT GEOMETRY, REQUIREMENTS AND TESTING
|
|
ISO 11040-5:2012
|
Prefilled syringes — Part 5: Plunger stoppers for injectables
|
|
ISO 11608-5:2012
|
Needle-based injection systems for medical use Requirements and test methods Part 5: Automated functions
|
|
ISO 14937:2009
|
Sterilization of health care products General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices
|
|
ISO 11040-7:2015
|
Prefilled syringes Part 7: Packaging systems for sterilized subassembled syringes ready for filling
|
|
ISO 527-2:2012
|
Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics
|
|
ISO 2039-2:1987
|
Plastics Determination of hardness Part 2: Rockwell hardness
|
|
ISO 11608-2:2012
|
Needle-based injection systems for medical use Requirements and test methods Part 2: Needles
|
|
ISO 11135-1:2007
|
Sterilization of health care products Ethylene oxide Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices
|
|
ISO 4802-2:2016
|
Glassware — Hydrolytic resistance of the interior surfaces of glass containers — Part 2: Determination by flame spectrometry and classification
|
|
ISO 7886-1:2017
|
Sterile hypodermic syringes for single use — Part 1: Syringes for manual use
|
|
ISO 180:2000
|
Plastics Determination of Izod impact strength
|
|
ISO 15378:2017
|
Primary packaging materials for medicinal products — Particular requirements for the application of ISO 9001:2015, with reference to good manufacturing practice (GMP)
|
|
ISO 10993-7:2008
|
Biological evaluation of medical devices Part 7: Ethylene oxide sterilization residuals
|
|
ISO 7864:2016
|
Sterile hypodermic needles for single use — Requirements and test methods
|
|
ISO 10993-1:2009
|
Biological evaluation of medical devices Part 1: Evaluation and testing within a risk management process
|
|
ISO 80369-1:2010
|
Small-bore connectors for liquids and gases in healthcare applications Part 1: General requirements
|
|
ISO 14644-1:2015
|
Cleanrooms and associated controlled environments Part 1: Classification of air cleanliness by particle concentration
|
|
ISO 4802-1:2016
|
Glassware — Hydrolytic resistance of the interior surfaces of glass containers — Part 1: Determination by titration method and classification
|
|
ISO 23908:2011
|
Sharps injury protection Requirements and test methods Sharps protection features for single-use hypodermic needles, introducers for catheters and needles used for blood sampling
|
|
ISO 554:1976
|
Standard atmospheres for conditioning and/or testing — Specifications
|
|
ISO 594-2:1998
|
Conical fittings with 6 % (Luer) taper for syringes, needles and certain other medical equipment Part 2: Lock fittings
|
|
ISO 178:2010
|
Plastics Determination of flexural properties
|
|
ISO 594-1:1986
|
Conical fittings with a 6 % (Luer) taper for syringes, needles and certain other medical equipment Part 1: General requirements
|
|
ISO 17665-1:2006
|
Sterilization of health care products — Moist heat — Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices
|
|
ISO/IEC Guide 98-3:2008
|
Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995)
|
Important note : All end users must be registered with an Account prior to user licenses being assigned.