Metallic coatings and other inorganic coatings. Electrodeposited zinc alloys with nickel, cobalt or iron

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

02-28-2009

Publisher

British Standards Institution

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Information to be supplied by the purchaser to the
  electroplater
  4.1 Essential information
  4.2 Additional information
5 Designation
  5.1 General
  5.2 Designation specification
  5.3 Basis metal
  5.4 Stress-relief heat treatment prior to electroplating
  5.5 Type and thickness of zinc alloy coating
  5.6 Chromate conversion coatings and other supplementary
      treatments
  5.7 Hydrogen-embrittlement-relief heat treatment after
      electroplating
  5.8 Examples of coating designations
6 Requirements
  6.1 Appearance
  6.2 Thickness
  6.3 Adhesion
  6.4 Porosity
  6.5 Composition of coating
  6.6 Corrosion performance in neutral salt spray
  6.7 Stress-relief heat treatments
  6.8 Hydrogen-embrittlement-relief heat treatments
7 Sampling
Annex A (normative) - Thickness, adhesion and porosity tests
Annex B (normative) - Corrosion performance of zinc alloy
        coatings with chromate conversion and other
        supplementary treatments on steel in neutral salt spray
Bibliography

Provides the requirements for electrodeposited zinc alloy coatings containing either nickel, cobalt or iron.

This International Standard covers the requirements for electrodeposited zinc alloy coatings containing either nickel, cobalt or iron. It provides a method of designating the electrodeposited coatings, chromate conversion coatings and other supplementary treatments.

Committee	STI/33
DevelopmentNote	Supersedes 07/30171995 DC. (03/2009)
DocumentType	Standard
Pages	24
PublisherName	British Standards Institution
Status	Current
Supersedes	07/30171995 DC : 0

Standards	Relationship
ISO 15726:2009	Identical

ISO 3868:1976	Metallic and other non-organic coatings — Measurement of coating thicknesses — Fizeau multiple-beam interferometry method
ISO 10309:1994	Metallic coatings Porosity tests Ferroxyl test
ISO 9220:1988	Metallic coatings Measurement of coating thickness Scanning electron microscope method
ISO 2080:2008	Metallic and other inorganic coatings Surface treatment, metallic and other inorganic coatings Vocabulary
ISO 10111:2000	Metallic and other inorganic coatings Measurement of mass per unit area Review of gravimetric and chemical analysis methods
ISO 9587:2007	Metallic and other inorganic coatings Pretreatment of iron or steel to reduce the risk of hydrogen embrittlement
ISO 27830:2008	Metallic and other inorganic coatings Guidelines for specifying metallic and inorganic coatings
ISO 3543:2000	Metallic and non-metallic coatings Measurement of thickness Beta backscatter method
ISO 27831-1:2008	Metallic and other inorganic coatings — Cleaning and preparation of metal surfaces — Part 1: Ferrous metals and alloys
ISO 1463:2003	Metallic and oxide coatings Measurement of coating thickness Microscopical method
ISO 3882:2003	Metallic and other inorganic coatings — Review of methods of measurement of thickness
ISO 10587:2000	Metallic and other inorganic coatings Test for residual embrittlement in both metallic-coated and uncoated externally-threaded articles and rods Inclined wedge method
ISO 15724:2001	Metallic and other inorganic coatings — Electrochemical measurement of diffusible hydrogen in steels — Barnacle electrode method
ASTM B 840 : 2015 : REDLINE	Standard Specification for Electrodeposited Coatings of Zinc Cobalt Alloy Deposits
ISO 4518:1980	Metallic coatings Measurement of coating thickness Profilometric method
ISO 2819:1980	Metallic coatings on metallic substrates — Electrodeposited and chemically deposited coatings — Review of methods available for testing adhesion
ISO 27831-2:2008	Metallic and other inorganic coatings — Cleaning and preparation of metal surfaces — Part 2: Non-ferrous metals and alloys
ASTM E 527 : 2016 : REDLINE	Standard Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS)
ISO 4519:1980	Electrodeposited metallic coatings and related finishes — Sampling procedures for inspection by attributes
ISO 3497:2000	Metallic coatings Measurement of coating thickness X-ray spectrometric methods
ISO 9588:2007	Metallic and other inorganic coatings Post-coating treatments of iron or steel to reduce the risk of hydrogen embrittlement
ISO 4520:1981	Chromate conversion coatings on electroplated zinc and cadmium coatings
ISO 2178:2016	Non-magnetic coatings on magnetic substrates Measurement of coating thickness Magnetic method
ISO 9227:2017	Corrosion tests in artificial atmospheres — Salt spray tests
ISO 2177:2003	Metallic coatings — Measurement of coating thickness — Coulometric method by anodic dissolution
ISO 10308:2006	Metallic coatings Review of porosity tests
ISO 3613:2010	Metallic and other inorganic coatings Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys Test methods
ISO 2064:1996	Metallic and other inorganic coatings — Definitions and conventions concerning the measurement of thickness

View more information

US$237.18

Excluding Tax where applicable

Product format

I agree to the DRM document license rules apply against the PDF selection made.

Please confirm that you agree to the document license rules for this document.

I agree to the document license rules .

Please confirm that you agree to the document license rules for this document.

Access your standards online with a subscription

Features

Simple online access to standards, technical information and regulations.
Critical updates of standards and customisable alerts and notifications.
Multi-user online standards collection: secure, flexible and cost effective.

Learn more on subscription solutions

Get in touch with us

Log into your Account

BS ISO 15726:2009

Current

Table of Contents

Abstract

Scope

General Product Information

International Equivalents

Standards Referencing This Book

Category

Subcategory

Access your standards online with a subscription