BS ISO/IEC TR 13561:1994

1. Scope
2. References
3. Abbreviations
4. Judgement for each item
4.1 Functional areas
4.2 Control Zone information
4.3 Number and location of erroneous sector in the DMA
4.3.1 Check DMA just after having made a new DMA, in
       Case A (11)
4.3.2 Check DMA before reading/writing the data in user
       zone just after loading the disk into the drive,
       in Case B (4 and 17)
4.3.3 Check a DMA after updating the SDL, in Case B
       (10, 14, and 23)
4.4 Number of bad sectors in the Rewritable Zone
4.5 DDS information
5. The recommendation for the procedure of making a
       DMA
5.1 The contents of each DMA just after the
       certification
5.2 The usage of the old PDL and SDL which are already
       recorded in the case of reinitialisation
5.3 Recommendation for the order of erasing/writing a
       sector in the DMA
5.3.1 The order of erasing/writing sectors in the DMA
       during initialisation or re-initialisation
5.3.2 The order of erasing/writing sectors in the DMA
       when updating the SDL
6. Recommendation for sector replacement
6.1 Handling when the number of bad sectors exceeds
       the number of replacement sectors in a group during
       certification
6.2 Handling when the number of bad sectors exceeds
       the number of replacement sectors in a group during
       write mode
6.3 Order for the usage of the spare area
6.4 The number of replacement chaining
6.5 Sector replacement in the DMA
7. Write condition at rotational speed other than 30Hz
8. Recommendation for Partially Embossed disks