• There are no items in your cart

BS QC 480000(1995) : 1995

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D.C. LOW FREQUENCY ANALOGUE AND IN DIGITAL HIGH SPEED DATA APPLICATIONS - PART 1: GENERIC SPECIFICATION
Superseded date

07-31-2006

Published date

11-23-2012

Foreword
1 General information
   1.1 Scope
   1.2 General considerations relating to
        specifications
        1.2.1 Sectional specifications
        1.2.2 Blank detail specifications
        1.2.3 Detail specifications
        1.2.4 Conformance to different levels of
               compatibility
   1.3 Normative references
2 Technical information
   2.1 Terminology
   2.2 Classification into climatic categories
   2.3 Creepage and clearance distances
   2.4 Current-carrying capacity
   2.5 IEC type designation
   2.6 Marking
        2.6.1 On the connector
        2.6.2 On the package
   2.7 Dimensional information
        2.7.1 Drawings and dimensions
        2.7.2 Gauges
3 Quality assessment procedures
   3.1 Quality assessment definitions
        3.1.1 Primary stage of manufacture
        3.1.2 Structurally similar connectors
        3.1.3 System of levels
        3.1.4 Certified record of released lots
   3.2 Approval of manufacturers, independent test
        laboratories and distributors
   3.3 Qualification approval (QA)
        3.3.1 General
        3.3.2 Application for qualification approval
        3.3.3 Granting of qualification approval
        3.3.4 Extent of qualification approval
        3.3.5 Maintenance of qualification approval
        3.3.6 Suspension or withdrawal of qualification
               approval
        3.3.7 Significant changes
        3.3.8 Qualification approval testing
        3.3.9 Qualification approval report
   3.4 Capability approval
        3.4.1 Capability documentation
        3.4.2 Capability assessment procedures
        3.4.3 Description of capability
        3.4.4 Procedures for capability approval
   3.5 Quality conformance inspection
        3.5.1 Formation of inspection lots
        3.5.2 Small lots and/or expensive connectors
        3.5.3 Released lots
        3.5.4 Quality conformance inspection groups
        3.5.5 Quality conformance testing
        3.5.6 In-process testing
   3.6 Qualification approval/quality assessment
        systems
        3.6.1 Qualification approval
        3.6.2 Design proving or type testing
4 Tests and test schedules
   4.1 General aspects
        4.1.1 Test procedures and measuring methods
        4.1.2 Preconditioning
        4.1.3 Wiring and mounting of specimens
   4.2 Test schedules
   4.3 Grouping of tests
        4.3.1 Test groups for qualification approval
               testing
        4.3.2 Inspection groups for quality conformance
               inspection
        4.3.3 Test groups for capability approval testing
   4.4 Delayed delivery
   4.5 Release for delivery, before completion of 'Group B'
        tests
   4.6 Delivery of tested connectors
Annex A (normative) Common lettering system to be used
        in drawings
Annex ZA (normative) Normative references to international
         publications with their corresponding European
         publications
Figure 1
Table 1

Gives uniform specifications, testing requirements and quality assessment procedures for connectors used in electronic and electric equipment. Does not include connectors designed for radio frequency use.

Committee
EPL/48/2
DocumentType
Standard
PublisherName
British Standards Institution
Status
Superseded
SupersededBy

IEC 60512-8:1993 Electromechanical components for electronic equipment; basic testing procedures and measuring methods - Part 8: Connector tests (mechanical) and mechanical tests on contacts and terminations
IEC 60068-1:2013 Environmental testing - Part 1: General and guidance
IEC 60512-6:1984 Electromechanical components for electronic equipment; basic testing procedures and measuring methods. Part 6: Climatic tests and soldering tests
IECQ 001003:1998 IEC QUALITY ASSESSMENT SYSTEM FOR ELECTRONIC COMPONENTS (IECQ) - GUIDANCE DOCUMENTS
ISO 1101:2017 Geometrical product specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out
EN 60068-1:2014 Environmental testing - Part 1: General and guidance
IEC 60512-7:1993 Electromechanical components for electronic equipment; basic testing procedures and measuring methods - Part 7: Mechanical operating tests and sealing tests
EN 60512-1:2001 Connectors for electronic equipment - Tests and measurements - Part 1: General
IEC 60410:1973 Sampling plans and procedures for inspection by attributes
ISO 1302:2002 Geometrical Product Specifications (GPS) Indication of surface texture in technical product documentation
IEC GUIDE 102:1996 Electronic components - Specification structures for qualityassessment (Qualification approval and capability approval)
ISO 286-1:2010 Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 1: Basis of tolerances, deviations and fits
IEC 60512-4:1976 Electromechanical components for electronic equipment; basic testing procedures and measuring methods. Part 4: Dynamic stress tests
ISO 286-2:2010 Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
IEC 60512-9:1992 Electromechanical components for electronic equipment; basic testing procedures and measuring methods - Part 9: Miscellaneous tests
ISO 129:1985 Technical drawings Dimensioning General principles, definitions, methods of execution and special indications
IEC 60512-5:1992 Electromechanical components for electronic equipment; basic testing procedures and measuring methods - Part 5: Impact tests (free components), static load tests (fixed components), endurance tests and overload tests
IEC 60512-1:2001 Connectors for electronic equipment - Tests and measurements - Part 1: General
IEC 60664-1:2007 Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
IEC 60050-581:2008 International Electrotechnical Vocabulary (IEV) - Part 581: Electromechanical components for electronic equipment
IEC 60512-3:1976 Electromechanical components for electronic equipment; basic testing procedures and measuring methods. Part 3: Current-carrying capacity tests

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.