• There are no items in your cart

C22.2 NO. 280-16

Current
Current

The latest, up-to-date edition.

Electric vehicle supply equipment (Tri-national standard, with UL 2594 and NMX-J-677-ANCE-2016)
Available format(s)

Hardcopy , PDF

Language(s)

English, French

Published date

01-01-2016

Preface
INTRODUCTION
1 Scope
2 Units of Measurement
3 Components
4 Normative References
5 Definitions
CONSTRUCTION
6 General
7 Frame and Enclosure
8 Protection of Users - Accessibility and User Servicing
9 Protection Against Electric Shock
10 Corrosion Protection Against Electric Shock
11 Mechanical Assembly
12 Supply Connections
13 Output Connections and Wiring
14 Equipment Grounding
15 Bonding
16 EV Bonding
17 Internal Wiring
18 Flammability
19 Current Carrying Parts
20 Electrical Connections
21 Gaskets
22 Spacings
23 Alternate Spacings - Clearances and Creepage Distances
24 Separation of Circuits
25 Control Circuits
26 Switches and controls
27 Capacitors, Resistors, and Suppressors
28 Overcurrent Protective Devices
29 Transformers
30 Printed Wiring Boards
31 Insulating Materials
32 Protection of Service Personnel
33 Electronic Protection Circuits
34 Cord Reels
35 Luminaires
PROTECTION OF USERS AGAINST INJURY
36 General
37 Sharp Edges
38 Enclosures and Guards
39 Strength of Enclosures
40 Surface Temperatures
41 Stability
42 Mounting Means
43 Strength of Handles
44 Height of Coupling Means
PERFORMANCE
45 General
46 Leakage Current Test
47 Leakage Current Test Following Humidity Conditioning
48 Input Test
49 Temperature Test
50 Capacitor Discharge Test
51 Dielectric Voltage Withstand Test
52 Abnormal Tests
53 Flanged Bobbin Transformer Abnormal Test
54 Strain Relief Tests
55 EV Cable Secureness Test
56 Grounding Tests
57 Impact Test
58 Vehicle Drive Over Test
59 Drop Test
60 Strength of Terminal Insulating Base and Support
61 Impact on Glass Covers
62 Bonding Conductor Tests
63 Evaluation of Reduced Spacings on Printed Wiring
   Boards
64 Mounting Means Test
65 Strength of Handles
66 Mold Stress-Relief Distortion Test
67 Additional Environmental Tests
68 Tests for Permanence of Cord Tags
69 Tests on Transformer Insulating Materials
70 Metallic Coating Thickness Test
71 Overcurrent Protection Calibration Test
MARKINGS
72 General
73 Environmental Enclosure Markings
74 Cautionary Markings
INSTRUCTIONS
75 General
76 Instructions Pertaining to Risk of Fire, Electric
   Shock, or Injury to Persons
77 Installation Instructions
78 Operating Instructions
79 User Maintenance Instructions
80 Moving, Transporting, and Storage Instructions
Annex A - Referenced Standards (normative)
Annex B - Test Sequences and Sample Requirements (informative)
Annex C - French and Spanish Translations (informative)

Contains conductive electric vehicle (EV) supply equipment with a primary source voltage of 600 V ac or less, with a frequency of 50 or 60 Hz, and intended to provide ac power to an electric vehicle with an on-board charging unit.

Preface This is the harmonized ANCE, CSA Group, and UL Standard for Electric Vehicle Supply Equipment. It is the Second edition of NMX-J-677-ANCE, the Second edition of CSA C22.2 No. 280, and the Second edition of UL 2594. This edition of NMX-J-677-ANCE supersedes the previous edition published on February 22, 2013. This edition of CSA-C22.2 No. 280 supersedes the previous edition published on February 22, 2013. This edition of UL 2594 supersedes the previous edition published on February 22, 2013. Scope 1.1 This Standard covers conductive electric vehicle (EV) supply equipment with a primary source voltage of 600 V ac or less, with a frequency of 50 or 60 Hz, and intended to provide ac power to an electric vehicle with an on-board charging unit. This Standard covers electric vehicle supply equipment intended for use where ventilation is not required. 1.2 With reference to 1.1, the following list of examples of electric vehicle supply equipment are included in this Standard: a) EV Cord Sets - Rated 125 Vac maximum, 16 A maximum, intended for indoor and outdoor use; b) Fastened in place EV Charging Stations - Rated 250 Vac maximum, 40 A maximum, intended for indoor or outdoor use; c) Fixed in place EV Charging Stations - Rated 600 Vac maximum, intended for indoor or indoor/outdoor use; and d) Fixed in place EV Power Outlet - Rated 600 Vac maximum, intended for indoor or indoor/outdoor use. For Mexico, use 127 Vac where 120 or 125 Vac is referenced in this Standard. In Canada and the United States, this does not apply. 1.3 The products covered by this Standard are intended for use in accordance with the Installation Codes in Annex A, Ref. No.1. 1.4 This Standard does not cover cord sets or power supply cords for applications other than EV charging cord sets. For cord sets and power supply cords not covered by this Standard, refer to Annex A, Ref. No. 2 and No. 3. 1.5 With reference to 1.2, this Standard does not cover electric vehicle charging equipment. For EV charging equipment not covered by this Standard, refer to Annex A, Ref. No. 4. 1.6 This Standard does not cover electric vehicle connectors. For electric vehicle connectors not covered by this Standard, refer to Annex A, Ref. No. 5. 1.7 This Standard does not cover regular-use power outlets. For regular-use power outlets not covered by this Standard, refer to Annex A, Ref. No. 6. 1.8 This Standard does not cover equipment intended for wireless power transfer, which may also be designated as wireless charging, inductive charging, magnetic resonance charging, or any other similar designation indicating the transfer of power from the EVSE to the vehicle through other than a conductive connection.

DevelopmentNote
Jointly published by ANCE, CSA and UL. Also numbered as UL 2594 and NMX-J-677-ANCE. (03/2013)
DocumentType
Standard
ISBN
978-1-4883-0139-1
Pages
158
PublisherName
Canadian Standards Association
Status
Current
Supersedes

CSA C22.2 No. 281.2 : 2012 : INC : UPD 1 : 2015 STANDARD FOR SAFETY FOR PERSONNEL PROTECTION SYSTEMS FOR ELECTRIC VEHICLE (EV) SUPPLY CIRCUITS: PARTICULAR REQUIREMENTS FOR PROTECTION DEVICES FOR USE IN CHARGING SYSTEMS
CSA C22.2 No. 107.1 : 2016 POWER CONVERSION EQUIPMENT
CAN/CSA-C22.2 NO. 281.2-12 (R2017) Standard for safety for personnel protection systems for electric vehicle (EV) supply circuits: Particular requirements for protection devices for use in charging systems (Tri-national standard, with UL 2231-2 and NMX-J-668/2-ANCE)
CSA C22.2 No. 281.2 : 2012 : INC : UPD 2 : 2016 STANDARD FOR SAFETY FOR PERSONNEL PROTECTION SYSTEMS FOR ELECTRIC VEHICLE (EV) SUPPLY CIRCUITS: PARTICULAR REQUIREMENTS FOR PROTECTION DEVICES FOR USE IN CHARGING SYSTEMS
UL 2231-2:2ED 2012-09 Personnel Protection Systems for Electric Vehicle (EV) Supply Circuits: Particular Requirements for Protection Devices for Use in Charging Systems
CSA C22.2 No. 281.2:2012 STANDARD FOR SAFETY FOR PERSONNEL PROTECTION SYSTEMS FOR ELECTRIC VEHICLE (EV) SUPPLY CIRCUITS: PARTICULAR REQUIREMENTS FOR PROTECTION DEVICES FOR USE IN CHARGING SYSTEMS

UL 1411:7ED 2016-01 Standard for Transformers and Motor Transformers for Use in Audio-, Radio-, and Television-Type Appliances
CSA C22.2 No. 94.1 : 2015 ENCLOSURES FOR ELECTRICAL EQUIPMENT, NON-ENVIRONMENTAL CONSIDERATIONS
CSA C22.2 No. 25 : 1966 ENCLOSURES FOR USE IN CLASS 2, DIVISION 1, GROUPS E, F, AND G HAZARDOUS LOCATIONS
UL 514A:11ED 2013-02 Metallic Outlet Boxes
CSA C22.2 No. 223 : 2015 POWER SUPPLIES WITH EXTRA-LOW-VOLTAGE CLASS 2 OUTPUTS
ANSI Z97.1 : 2015 SAFETY GLAZING MATERIALS USED IN BUILDINGS - SAFETY PERFORMANCE SPECIFICATIONS AND METHODS OF TEST
UL 50:13ED 2015-10 Enclosures for Electrical Equipment, Non-Environmental Considerations
UL 1439:5ED 2015-04 Tests for Sharpness of Edges on Equipment
CSA C22.2 No. 5 : 2013 MOLDED-CASE CIRCUIT BREAKERS, MOLDED-CASE SWITCHES AND CIRCUIT-BREAKER ENCLOSURES
UL 5085-3:1ED 2006-04 Low Voltage Transformers - Part 3: Class 2 and Class 3 Transformers
C22.1-15 Canadian Electrical Code, Part I (23rd Edition), Safety Standard for Electrical Installations
CSA C22.2 No. 49 : 2014 FLEXIBLE CORDS AND CABLES
ISA 12.12.01 : 2007 NONINCENDIVE ELECTRICAL EQUIPMENT FOR USE IN CLASS 1 AND 2, DIVISION 2 AND CLASS 3, DIVISIONS 1 AND 2 HAZARDOUS (CLASSIFIED) LOCATIONS
UL 506:14ED 2017-06 Specialty Transformers
CSA C22.2 No. 0.4 : 2004(R2013) BONDING OF ELECTRICAL EQUIPMENT
UL 248-8:3ED 2011-05 Low-Voltage Fuses - Part 8: Class J Fuses
UL 4248-11:1ED 2007-02 Fuseholders - Part 11: Type C (Edison Base) and Type S Plug Fuse
CSA C22.2 No. 21 : 2014 CORD SETS AND POWER-SUPPLY CORDS
UL 1283:7ED 2017-05 Electromagnetic Interference Filters
UL 83:16ED 2017-07 Standard for Thermoplastic-Insulated Wires and Cables
CSA C22.2 No. 0.2 : 2016 INSULATION COORDINATION
UL 4248-9:1ED 2007-02 Fuseholders - Part 9: Class K
UL 635:3ED 2012-03 Insulating Bushings
CSA C22.2 No. 282 : 2013 PLUGS, RECEPTACLES, AND COUPLERS FOR ELECTRIC VEHICLES
ASTM D 1525 : 2017 Standard Test Method for Vicat Softening Temperature of Plastics
ISA 82.02.01 : 1999 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
CSA C22.2 No. 190 : 2014 CAPACITORS FOR POWER FACTOR CORRECTION
SAE J 1772 : 2016 SAE ELECTRIC VEHICLE AND PLUG IN HYBRID ELECTRIC VEHICLE CONDUCTIVE CHARGE COUPLER
CSA C22.2 No. 65 : 2013 WIRE CONNECTORS
UL 248-12:3ED 2011-05 Low-Voltage Fuses - Part 12: Class R Fuses
UL 248-11:3ED 2011-05 Low-Voltage Fuses - Part 11: Plug Fuses
UL 101:6ED 2017-07 Leakage Current for Utilization Equipment
UL 248-4:2ED 2000-08 Low-Voltage Fuses - Part 4: Class CC Fuses
UL 1203:5ED 2013-11 ExplosionProof and Dust-IgnitionProof Electrical Equipment for Use in Hazardous (Classified) Locations
CSA C22.2 No. 0.15 : 2015 ADHESIVE LABELS
NFPA 70 : 2017 NATIONAL ELECTRICAL CODE
C22.2 NO. 8-13 (R2018) Electromagnetic interference (EMI) filters
UL 248-9:2ED 2000-08 Standard for Low-Voltage Fuses - Part 9: Class K Fuses
C22.2 NO. 75-17 Thermoplastic insulated wires and cables (Trinational standard with UL 83 and NMX-J-010-ANCE-2017)
UL 746A:6ED 2012-09 Polymeric Materials - Short Term Property Evaluations
C22.2 NO. 4248.1-17 Fuseholders Part 1: General requirements (Trinational standard with UL 4248-1 and NMX-J-009/4248/1-ANCE)
UL 248-1 : 3 LOW-VOLTAGE FUSES - PART 1: GENERAL REQUIREMENTS
UL 4248-6:1ED 2007-02 Fuseholders - Part 6: Class H
UL 4248-15:1ED 2007-02 Fuseholders - Part 15: Class T
UL 2231-2:2ED 2012-09 Personnel Protection Systems for Electric Vehicle (EV) Supply Circuits: Particular Requirements for Protection Devices for Use in Charging Systems
UL 2231-1:2ED 2012-09 Personnel Protection Systems for Electric Vehicle (EV) Supply Circuits; Part 1: General Requirements
UL 4248-4:1ED 2007-02 Fuseholders - Part 4: Class CC
CSA C22.2 No. 14 : 2013 INDUSTRIAL CONTROL EQUIPMENT
C22.2 NO. 182.1-17 Plugs, receptacles, and cable connectors of the pin and sleeve type (Trinational standard with NMX-J-719-ANCE and UL 1682)
ASTM E 162 : 2016 : REDLINE Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
UL 248-5:2ED 2000-08 Standard for Low-Voltage Fuses - Part 5: Class G Fuses
CSA C22.2 No. 94.2 : 2015 ENCLOSURES FOR ELECTRICAL EQUIPMENT, ENVIRONMENTAL CONSIDERATIONS

View more information
US$500.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.