CAN/CSA-ISO/IEC 14543-3-7-07 (R2017)
Current
The latest, up-to-date edition.
Hardcopy , PDF
English
01-01-2007
FOREWORD
INTRODUCTION
1 Scope
2 Normative References
3 Terms, definitions and abbreviations
4 Conformance
5 Physical layer type RF
6 Data Link Layer Type RF
Bibliography
Describes the mandatory and optional requirements for the medium-specific Physical and Data Link Layers of radio frequency for network based control of HES Class 1 products and systems.
Preface Standards development within the Information Technology sector is harmonized with international standards development. Through the CSA Technical Committee on Information Technology (TCIT), Canadians serve as the Canadian Advisory Committee (CAC) on ISO/IEC Joint Technical Committee 1 on Information Technology (ISO/IEC JTC1) for the Standards Council of Canada (SCC), the ISO member body for Canada and sponsor of the Canadian National Committee of the IEC. Also, as a member of the International Telecommunication Union (ITU), Canada participates in the International Telegraph and Telephone Consultative Committee (ITU-T). Scope This part of ISO/IEC 14543 defines the mandatory and optional requirements for the mediumspecific Physical and Data Link Layers of radio frequency for network based control of HES Class 1 products and systems. It describes a multi-application bus system where the functions are decentralised, distributed and linked through a common communication process. NOTE: Data Link Layer interface and general definitions, which are medium independent, are given in ISO/IEC 14543-3-1.
| DocumentType |
Standard
|
| ISBN |
978-1-55436-592-0
|
| Pages |
0
|
| ProductNote |
Reconfirmed EN
|
| PublisherName |
Canadian Standards Association
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| ISO/IEC 14543-3-7:2007 | Identical |
| CLC/TR 50090-9-2:2007 | HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 9-2: INSTALLATION REQUIREMENTS - INSPECTION AND TESTING OF HBES INSTALLATION |
| ISO/IEC 14763-2:2012 | Information technology Implementation and operation of customer premises cabling Part 2: Planning and installation |
| ISO/IEC TR 14762:2001 | Information technology Home Control Systems Guidelines for functional safety |
| ISO/IEC TR 15067-3:2000 | Information technology Home Electronic Systems (HES) application model Part 3: Model of an energy management system for HES |
| ISO/IEC 15018:2004 | Information technology Generic cabling for homes |
| ISO/IEC 14543-3-6:2007 | Information technology Home electronic system (HES) architecture Part 3-6: Media and media dependent layers Network based on HES Class 1, twisted pair |
| ISO/IEC 14543-3-7:2007 | Information technology Home electronic system (HES) architecture Part 3-7: Media and media dependent layers Radio frequency for network based control of HES Class 1 |
| ISO/IEC 14709-1:1997 | Information technology Configuration of Customer Premises Cabling (CPC) for applications Part 1: Integrated Services Digital Network (ISDN) basic access |
| EN 50090-5-1:2005 | Home and Building Electronic Systems (HBES) - Part 5-1: Media and media dependent layers - Power line for HBES Class 1 |
| ISO/IEC 15045-1:2004 | Information technology Home Electronic System (HES) gateway Part 1: A residential gateway model for HES |
| ISO/IEC TR 15067-2:1997 | Information technology Home Electronic Systems (HES) application model Part 2: Lighting model for HES |
| EN 50090-3-2:2004 | Home and Building Electronic Systems (HBES) - Part 3-2: Aspects of application - User process for HBES Class 1 |
| ISO/IEC 11801:2002 | Information technology Generic cabling for customer premises |
| ISO/IEC 10192-1:2002 | Information technology Home Electronic System (HES) interfaces Part 1: Universal Interface (UI) Class 1 |
| EN 50090-2-3:2005 | Home and Building Electronic Systems (HBES) - Part 2-3: System overview - General functional safety requirements for products intended to be integrated in HBES |
| EN 300 220-3 : 1.1.1 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); SHORT RANGE DEVICES (SRD); RADIO EQUIPMENT TO BE USED IN THE 25 MHZ TO 1 000 MHZ FREQUENCY RANGE WITH POWER LEVELS RANGING UP TO 500 MW; PART 3: HARMONIZED EN COVERING ESSENTIAL REQUIREMENTS UNDER ARTICLE 3.2 OF THE R&TTE DIRECTIVE |
| ISO/IEC 14543-2-1:2006 | Information technology - Home electronic systems (HES) architecture Part 2-1: Introduction and device modularity |
| EN 50090-7-1:2004 | Home and Building Electronic Systems (HBES) - Part 7-1: System management - Management procedures |
| ISO/IEC 14543-3-1:2006 | Information technology Home electronic systems (HES) architecture Part 3-1: Communication layers Application layer for network based control of HES Class 1 |
| ISO/IEC 14709-2:1998 | Information technology Configuration of customer premises cabling (CPC) for applications Part 2: Integrated Services Digital Network (ISDN) primary rate |
| EN 301 489-3 : 1.6.1 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); ELECTROMAGNETIC COMPATIBILITY (EMC) STANDARD FOR RADIO EQUIPMENT AND SERVICES; PART 3: SPECIFIC CONDITIONS FOR SHORT-RANGE DEVICES (SRD) OPERATING ON FREQUENCIES BETWEEN 9 KHZ AND 246 GHZ |
| EN 50090-2-2:1996/A2:2007 | HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 2-2: SYSTEM OVERVIEW - GENERAL TECHNICAL REQUIREMENTS |
| ISO/IEC TR 15067-4:2001 | Information technology Home Electronic System (HES) Application Model Part 4: Security System for HES |
| IEC 60948:1988 | Numeric keyboard for home electronic systems (HES) |
| ISO/IEC TR 14543-4:2002 | Information technology Home Electronic System (HES) architecture Part 4: Home and building automation in a mixed-use building |
| EN 50090-4-1:2004 | Home and Building Electronic Systems (HBES) - Part 4-1: Media independent layers - Application layer for HBES Class 1 |
| PREN 13757-4 : DRAFT 2011 | COMMUNICATION SYSTEMS FOR METERS AND REMOTE READING OF METERS - PART 4: WIRELESS METER READOUT (RADIO METER READING FOR OPERATION IN SRD BANDS) |
| ISO/IEC 14543-3-3:2007 | Information technology Home electronic system (HES) architecture Part 3-3: User process for network based control of HES Class 1 |
| ISO/IEC 18010:2002 | Information technology Pathways and spaces for customer premises cabling |
| ISO/IEC 14763-1:1999 | Information technology Implementation and operation of customer premises cabling Part 1: Administration |
| ISO/IEC 14543-3-5:2007 | Information technology Home electronic system (HES) architecture Part 3-5: Media and media dependent layers Power line for network based control of HES Class 1 |
| ISO/IEC 18012-1:2004 | Information technology Home Electronic System Guidelines for product interoperability Part 1: Introduction |
| ISO/IEC TR 10192-2:2000 | Information technology Home Electronic Systemes (HES) interfaces Part 2: Simple Interfaces Type 1 |
| ISO/IEC TR 24746:2005 | Information technology — Generic cabling for customer premises — Mid-span DTE power insertion |
| IEC 60870-5-2:1992 | Telecontrol equipment and systems - Part 5: Transmission protocols - Section 2: Link transmission procedures |
| EN 300 220-2 : 2.4.1 | SHORT RANGE DEVICES (SRD) OPERATING IN THE FREQUENCY RANGE 25 MHZ TO 1 000 MHZ - PART 2: HARMONISED STANDARD FOR ACCESS TO RADIO SPECTRUM FOR NON SPECIFIC RADIO EQUIPMENT |
| EN 50090-8:2000 | Home and Building Electronic Systems (HBES) - Part 8: Conformity assessment of products |
| EN 50090-5-2:2004 | Home and Building Electronic Systems (HBES) - Part 5-2: Media and media dependent layers - Network based on HBES Class 1, Twisted Pair |
| IEC 60870-5-1:1990 | Telecontrol equipment and systems. Part 5: Transmission protocols - Section One: Transmission frame formats |
| ISO/IEC TR 24704:2004 | Information technology — Customer premises cabling for wireless access points |
| ISO/IEC TR 15044:2000 | Information technology Terminology for the Home Electronic System (HES) |
| ISO/IEC 14543-3-4:2007 | Information technology Home electronic system (HES) architecture Part 3-4: System management Management procedures for network based control of HES Class 1 |
| ISO/IEC 14763-3:2014 | Information technology Implementation and operation of customer premises cabling Part 3: Testing of optical fibre cabling |
| EN 50090-9-1:2004 | Home and Building Electronic Systems (HBES) - Part 9-1: Installation requirements - Generic cabling for HBES Class 1 Twisted Pair |
| EN 50090-2-1:1994 | Home and Building Electronic Systems (HBES) - Part 2-1: System overview - Architecture |
| EN 300 220-1 : 2.4.1 | SHORT RANGE DEVICES (SRD) OPERATING IN THE FREQUENCY RANGE 25 MHZ TO 1000 MHZ; PART 1: TECHNICAL CHARACTERISTICS AND METHODS OF MEASUREMENT |
| ISO/IEC 14543-3-2:2006 | Information technology Home Electronic Systems (HES) Architecture Part 3-2: Communication layers Transport, network and general parts of data link layer for network based control of HES Class 1 |
| EN 50090-4-2 : 2004 | Home and Building Electronic Systems (HBES) - Part 4-2: Media independent layers - Transport layer, network layer and general parts of data link layer for HBES Class 1 |
| EN 50090-3-1:1994 | Home and Building Electronic Systems (HBES) - Part 3-1: Aspects of application - Introduction to the application structure |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.