• There are no items in your cart

CEI EN 60335-2-69 : 2014

Current
Current

The latest, up-to-date edition.

HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-69: PARTICULAR REQUIREMENTS FOR WET AND DRY VACUUM CLEANERS, INCLUDING POWER BRUSH, FOR COMMERCIAL USE
Available format(s)

Hardcopy , PDF

Language(s)

English - Italian

Published date

01-01-2014

INTRODUCTION
1. Scope
2. Normative references
3. Terms and definitions
4. General requirement
5. General conditions for the tests
6. Classification
7. Marking and instructions
8. Protection against access to live parts
9. Starting of motor-operated appliances
10. Power input and current
11. Heating
12. Void
13. Leakage current and dielectric strength at
    operating temperature
14. Transient overvoltages
15. Moisture resistance
16. Leakage current and electric strength
17. Overload protection of transformers and
    associated circuits
18. Endurance
19. Abnormal operation
20. Stability and mechanical hazards
21. Mechanical strength
22. Construction
23. Internal wiring
24. Components
25. Supply connection and external flexible cords
26. Terminals for external conductors
27. Provision for earthing
28. Screws and connections
29. Clearances, creepage distances and solid
    insulation
30. Resistance to heat and fire
31. Resistance to rusting
32. Radiation, toxicity and similar hazards
Annexes
Annex A (normative) - Routine tests
Annex AA (informative) - Emission of acoustical noise
Annex BB (informative) - Emission of vibration
Annex CC (informative) - Particular requirements for
         vacuum cleaners and dust extractors for the
         collection of dusts which present an explosion risk
Annex DD (normative) - Particular requirements for
         vacuum cleaners for use in ESD protected areas
Annex EE (informative) - Emission of acoustical noise
Annex FF (informative) - Emission of vibration
Annex ZA (normative) - Special national conditions
Annex ZC (normative) - Normative references to
         international publications with their corresponding
         European publications
Annex ZE (informative) - Specific additional requirements
         for appliances and machines intended for
         commercial use
Annex ZZ (informative) - Coverage of Essential Requirements
         of EU Directive 2006/42/EC
Bibliography

Describes the safety of electrical motor-operated Vacuum cleaners, including back-pack vacuum cleaners, and dust extractors, for wet suction, dry suction, or wet and dry suction, intended for commercial indoor or outdoor use with or without attachments.

Committee
CT 59/61
DevelopmentNote
Classificazione CEI 61-215. (08/2001) To be used in conjunction with CEI EN 60335-1. (06/2005)
DocumentType
Standard
Pages
152
PublisherName
Comitato Elettrotecnico Italiano
Status
Current

Standards Relationship
EN 60335-2-69:2012 Identical

VDI 3890:2016-03 Emission control - Pet cremation facilities

ISO 4871:1996 Acoustics — Declaration and verification of noise emission values of machinery and equipment
ISO 3744:2010 Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane
ISO/TR 11688-1:1995 Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning
IEC 61241-1-1:1999 Electrical apparatus for use in the presence of combustible dust - Part 1-1: Electrical apparatus protected by enclosures and surface temperature limitation - Specification for apparatus
IEC 60601-1:2005+AMD1:2012 CSV Medical electrical equipment - Part 1: General requirements for basic safety and essential performance
EN 60335-2-68:2012 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-68: PARTICULAR REQUIREMENTS FOR SPRAY EXTRACTION MACHINES, FOR COMMERCIAL USE (IEC 60335-2-68:2012, MODIFIED)
IEC 60335-2-67:2012+AMD1:2016 CSV Household and similar electrical appliances - Safety - Part 2-67: Particular requirements for floor treatment machines, for commercialuse
IEC 60335-2-100:2002 Household and similar electrical appliances - Safety - Part 2-100: Particular requirements for hand-held mains-operated garden blowers, vacuums and blower vacuums
ISO 9614-2:1996 Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 2: Measurement by scanning
EN ISO 7731:2008 Ergonomics - Danger signals for public and work areas - Auditory danger signals (ISO 7731:2003)
IEC 60335-2-72:2016 Household and similar electrical appliances - Safety - Part 2-72: Particular requirements for floor treatment machines with or without traction drive, for commercial use
ISO 7731:2003 Ergonomics Danger signals for public and work areas Auditory danger signals
EN 60335-2-67:2012 Household and similar electrical appliances - Safety - Part 2-67: Particular requirements for floor treatment machines for commercial use
ISO 2602:1980 Statistical interpretation of test results Estimation of the mean Confidence interval
EN ISO 11201:2010 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010)
IEC 60335-2-2:2009+AMD1:2012+AMD2:2016 CSV HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-2: PARTICULAR REQUIREMENTS FOR VACUUM CLEANERS AND WATER-SUCTION CLEANING APPLIANCES
EN ISO 5349-1 : 2001 MECHANICAL VIBRATION - MEASUREMENT AND EVALUATION OF HUMAN EXPOSURE TO HAND-TRANSMITTED VIBRATION - PART 1: GENERAL REQUIREMENTS (ISO 5349-1:2001)
EN ISO 3744:2010 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010)
ISO 11428:1996 Ergonomics Visual danger signals General requirements, design and testing
EN 60335-2-72:2012 Household and similar electrical appliances - Safety - Part 2-72: Particular requirements for floor treatment machines with or without traction drive, for commercial use
EN ISO 9614-2 : 1996 ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND INTENSITY - PART 2: MEASUREMENT BY SCANNING
ISO 11203:1995 Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level
ISO 3864-1:2011 Graphical symbols Safety colours and safety signs Part 1: Design principles for safety signs and safety markings
EN ISO 3743-1:2010 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for small movable sources in reverberant fields - Part 1: Comparison method for a hard-walled test room (ISO 3743-1:2010)
EN ISO 4871:2009 Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996)
ISO 5349-1:2001 Mechanical vibration Measurement and evaluation of human exposure to hand-transmitted vibration Part 1: General requirements
IEC 60312-1:2010+AMD1:2011 CSV Vacuum cleaners for household use - Part 1: Dry vacuum cleaners - Methods for measuring the performance
EN 60335-2-2:2010/A1:2013 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-2: PARTICULAR REQUIREMENTS FOR VACUUM CLEANERS AND WATER-SUCTION CLEANING APPLIANCES (IEC 60335-2-2:2009/A1:2012)
EN ISO 11688-1:2009 Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995)
IEC 60335-2-68:2012+AMD1:2016 CSV Household and similar electrical appliances - Safety - Part 2-68:Particular requirements for spray extraction machines, for commercial use
ISO 11201:2010 Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections
ISO 6344-2:1998 Coated abrasives Grain size analysis Part 2: Determination of grain size distribution of macrogrits P12 to P220
ISO 3743-1:2010 Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for small movable sources in reverberant fields Part 1: Comparison method for a hard-walled test room

View more information
US$337.82
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.