CEN/TS 15534-3:2007
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
03-08-2023
05-09-2007
Foreword
1 Scope
2 Normative references
3 Characterisation of WPC products
Annex A (informative) Technical data templates
This Technical Specification identifies the required and optional properties of wood-plastics composite (WPC) products. It is intended to be used as a basis for the specifications of WPC products. This part is applicable to WPC products intended to be used as decking and siding.NOTEOther applications may be covered when this document will be revised.
| Committee |
CEN/TC 249
|
| DocumentType |
Technical Specification
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Withdrawn
|
| SupersededBy |
| Standards | Relationship |
| UNE-CEN/TS 15534-3:2008 EX | Identical |
| PKN CEN/TS 15534-3 : 2007 | Identical |
| NEN NPR CEN/TS 15534-3 : 2007 | Identical |
| DD CEN/TS 15534-3:2007 | Identical |
| UNI CEN/TS 15534-3 : 2008 | Identical |
| XP CEN/TS 15534-3 : 2007 XP | Identical |
| DIN CEN/TS 15534-3:2007-08 | Identical |
| S.R. CEN TS 15534-3:2007 | Identical |
| CEN/TS 15534-1:2007 | Wood-plastics composites (WPC) - Part 1: Test methods for characterisation of WPC materials and products |
| DD CEN/TS 15534-1:2007 | Wood-plastics composites (WPC) Test methods for characterisation of WPC materials and products |
| S.R. CEN TS 15534-1:2007 | WOOD-PLASTICS COMPOSITES (WPC) - PART 1: TEST METHODS FOR CHARACTERISATION OF WPC MATERIALS AND PRODUCTS |
| ISO 7724-1:1984 | Paints and varnishes Colorimetry Part 1: Principles |
| ISO 6603-2:2000 | Plastics — Determination of puncture impact behaviour of rigid plastics — Part 2: Instrumented impact testing |
| EN 321:2001 | Wood-based panels - Determination of moisture resistance under cyclic test conditions |
| EN ISO 9142:2003 | Adhesives - Guide to the selection of standard laboratory ageing conditions for testing bonded joints (ISO 9142:2003) |
| EN 310:1993 | Wood-based panels - Determination of modulus of elasticity in bending and of bending strength |
| ENV 1156:1998 | Wood-based panels - Determination of duration of load and creep factors |
| EN 317:1993 | Particleboards and fibreboards - Determination of swelling in thickness after immersion in water |
| EN 13446:2002 | Wood-based panels - Determination of withdrawal capacity of fasteners |
| ISO 7724-2:1984 | Paints and varnishes Colorimetry Part 2: Colour measurement |
| ISO 11925-2:2010 | Reaction to fire tests Ignitability of products subjected to direct impingement of flame Part 2: Single-flame source test |
| ISO 9142:2003 | Adhesives Guide to the selection of standard laboratory ageing conditions for testing bonded joints |
| EN 789:2004 | Timber structures - Test methods - Determination of mechanical properties of wood based panels |
| EN ISO 179-1:2010 | Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2010) |
| EN 1383:2016 | Timber structures - Test methods - Pull through resistance of timber fasteners |
| EN 13823:2010+A1:2014 | REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - BUILDING PRODUCTS EXCLUDING FLOORINGS EXPOSED TO THE THERMAL ATTACK BY A SINGLE BURNING ITEM |
| ISO 7724-3:1984 | Paints and varnishes Colorimetry Part 3: Calculation of colour differences |
| EN ISO 9239-1:2010 | Reaction to fire tests for floorings - Part 1: Determination of the burning behaviour using a radiant heat source (ISO 9239-1:2010) |
| EN 13893:2002 | Resilient, laminate and textile floor coverings - Measurement of dynamic coefficient of friction on dry floor surfaces |
| EN ISO 4628-6:2011 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 6: Assessment of degree of chalking by tape method (ISO 4628-6:2011) |
| EN ISO 6603-2:2000 | Plastics - Determination of puncture impact behaviour of rigid plastics - Part 2: Instrumented puncture test (ISO 6603-2:2000) |
| EN 318:2002 | Wood based panels - Determination of dimensional changes associated with changes in relative humidity |
| ISO 179-1:2010 | Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test |
| ISO 877:1994 | Plastics Methods of exposure to direct weathering, to weathering using glass-filtered daylight, and to intensified weathering by daylight using Fresnel mirrors |
| ISO 4892-2:2013 | Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps |
| ISO 4628-6:2011 | Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 6: Assessment of degree of chalking by tape method |
| CEN/TS 15534-1:2007 | Wood-plastics composites (WPC) - Part 1: Test methods for characterisation of WPC materials and products |
| CEN/TS 15534-2:2007 | Wood-plastics composites (WPC) - Part 2: Characterisation of WPC materials |
| EN ISO 877 : 1996 | |
| ISO 9239-1:2010 | Reaction to fire tests for floorings Part 1: Determination of the burning behaviour using a radiant heat source |
| EN 927-6:2006 | Paints and varnishes - Coating materials and coating systems for exterior wood - Part 6: Exposure of wood coatings to artificial weathering using fluorescent UV lamps and water |
| EN ISO 4892-2:2013 | Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 4892-2:2013) |
| EN ISO 11925-2:2010/AC:2011 | REACTION TO FIRE TESTS - IGNITABILITY OF PRODUCTS SUBJECTED TO DIRECT IMPINGEMENT OF FLAME - PART 2: SINGLE-FLAME SOURCE TEST |
| ISO 2813:2014 | Paints and varnishes — Determination of gloss value at 20°, 60° and 85° |
| EN ISO 2813:2014 | Paints and varnishes - Determination of gloss value at 20°, 60° and 85° (ISO 2813:2014) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.