EN 12016:2013
|
Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Immunity
|
ISO/IEC 17000:2004
|
Conformity assessment Vocabulary and general principles
|
ANSI A92.1 : 1977
|
MOBILE LADDER STANDS AND SCAFFOLDS (TOWERS), MANUALLY PROPELLED,
|
ISO/TS 14798:2006
|
Lifts (elevators), escalators and moving walks Risk assessment and reduction methodology
|
ASCE 7 02 : 2003
|
MINIMUM DESIGN LOADS FOR BUILDINGS AND OTHER STRUCTURES
|
C22.1-15
|
Canadian Electrical Code, Part I (23rd Edition), Safety Standard for Electrical Installations
|
CSA B355 : 2015
|
LIFTS FOR PERSONS WITH PHYSICAL DISABILITIES
|
ISO 3411:2007
|
Earth-moving machinery Physical dimensions of operators and minimum operator space envelope
|
ISO 7250:1996
|
Basic human body measurements for technological design
|
CSA S16 : 2014
|
DESIGN OF STEEL STRUCTURES
|
CSA Z150 : 2016
|
SAFETY CODE ON MOBILE CRANES
|
B167-16
|
Overhead cranes, gantry cranes, monorails, hoists, and jib cranes
|
CSA B335 : 2015
|
SAFETY STANDARD FOR LIFT TRUCKS
|
ISO 13852:1996
|
Safety of machinery Safety distances to prevent danger zones being reached by the upper limbs
|
IEC 61508-5:2010
|
Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 5: Examples of methods for the determination of safety integrity levels (see Functional Safety and IEC 61508)
|
CSA B44.1 : 2014
|
ELEVATOR AND ESCALATOR ELECTRICAL EQUIPMENT
|
CFR 16(PTS1000-END) : 0
|
COMMERCIAL PRACTICES - FEDERAL TRADE COMMISSION - CONSUMER PRODUCT SAFETY COMMISSION
|
NFPA 255 : 2006
|
TEST OF SURFACE BURNING CHARACTERISTICS OF BUILDING MATERIALS
|
ISO/TS 22559-1:2004
|
Safety requirements for lifts (elevators) Part 1: Global essential safety requirements (GESRs)
|
IEC 60364-1:2005
|
Low-voltage electrical installations - Part 1: Fundamental principles, assessment of general characteristics, definitions
|
ASME A17.1-2016/CSA B44-16
|
Safety code for elevators and escalators (Bi-national standard, with ASME A17.1)
|
ICC A117.1 : 2009
|
ACCESSIBLE AND USABLE BUILDINGS AND FACILITIES
|
ISO/IEC Guide 51:2014
|
Safety aspects Guidelines for their inclusion in standards
|
ISO 2860:1992
|
Earth-moving machinery — Minimum access dimensions
|
ISO 15534-3:2000
|
Ergonomic design for the safety of machinery — Part 3: Anthropometric data
|
A23.3-14
|
Design of concrete structures
|
MIL-STD-882 Revision E:2012
|
System Safety
|
CSA G40.20 G40.21 : 2013
|
GENERAL REQUIREMENTS FOR ROLLED OR WELDED STRUCTURAL QUALITY STEEL/STRUCTURAL QUALITY STEEL
|
ASTM A 27/A27M : 2017 : REDLINE
|
Standard Specification for Steel Castings, Carbon, for General Application
|
NFPA 70 : 2017
|
NATIONAL ELECTRICAL CODE
|
ISO 14121:1999
|
Safety of machinery Principles of risk assessment
|
ISO 13854:2017
|
Safety of machinery — Minimum gaps to avoid crushing of parts of the human body
|
ISO 15534-1:2000
|
Ergonomic design for the safety of machinery — Part 1: Principles for determining the dimensions required for openings for whole-body access into machinery
|
ASTM E 8 : 2004
|
Standard Test Methods for Tension Testing of Metallic Materials
|
ISO 11228-1:2003
|
Ergonomics Manual handling Part 1: Lifting and carrying
|
CGSB 12.1 : 2017 CORR 1 2017
|
SAFETY GLAZING
|
CSA Z185 : 1987
|
SAFETY CODE FOR PERSONNEL HOISTS
|
ISO 15534-2:2000
|
Ergonomic design for the safety of machinery — Part 2: Principles for determining the dimensions required for access openings
|
ACI 318 PACK : 2008
|
BUILDING CODE REQUIREMENTS FOR STRUCTURAL CONCRETE (ACI 318-08) & PCA NOTES ON ACI 318-08
|