CSA C22.2 No. 112 : 2015
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
ELECTRIC CLOTHES DRYERS
Hardcopy , PDF
07-14-2021
English
01-01-2015
PREFACE
1 Scope
2 Normative References
3 Definitions
4 General Requirements
5 General Conditions for the Tests
6 Marking and Instructions
7 Protection Against Accessibility to
Current-Carrying Parts
8 Starting of Motor-Operated Appliances
9 Power Input and Current
10 Heating
11 Leakage Current and Insulation
Resistance
12 Cool Down Period
13 Moisture Resistance
14 Electric Strength
15 Overload Protection of Transformers
and Associated Circuits
16 Abnormal Operation
17 Stability and Mechanical Hazards
18 Mechanical Strength
19 Construction
20 Internal Wiring
21 Components
22 Supply Connection and External
Flexible Cords
23 Terminals for External Conductors
24 Provision for Grounding
25 Screws and Connections
26 Creepage Distances, Clearances,
and Distances Through Insulation
27 Resistance to Rusting and Corrosion
28 Polymeric Materials
29 Manufacturing and Production Tests
SUPPLEMENT SA (Normative) - Safety of
Smart Enabled Electric Clothes
Dryers
SA1 Scope
SA2 General
SA3 Functional Safety
SA4 Resistance to Electromagnetic
Phenomena (Immunity)
SA5 Marking and Instructions
SUPPLEMENT SB (Normative) - Alternative
Path for Electronic Controls
Requirements
INTRODUCTION
SB1 Scope
SB2 General
SB3 Definitions
CONSTRUCTION
SB4 Components
SB5 Enclosure
SB6 Field Connections
SB7 Creepage Distances, Clearance,
and Distances through Insulation
SB8 Electrical Insulation
SB9 Control Functions
SB10 Evaluation of the Different
Types of Control Circuits
SB11 Protective Electronic Circuits
SB12 Operating Controls or Circuits
That Perform Safety Critical
Functions
PERFORMANCE
SB13 General Conditions for
the Tests
SB14 Low-Power Circuits
SB15 Abnormal Operation and
Fault Tests
SB16 Programmable Component
Reduced Supply Voltage Test
SB17 Electromagnetic Compatibility
(EMC) Requirements - Immunity
MANUFACTURING AND PRODUCTION
LINE TESTING
SB18 General
MARKINGS
SB19 General
SUPPLEMENT SC - Plumbing Requirements
For Household Laundry
Equipment
SC1 Scope
SC2 Definitions
SC3 General Requirements
SC4 Test Procedures
Annex A (informative)
Pertains to electric clothes dryers intended to be used in nonhazardous locations in accordance with the Canadian Electrical Code, Part I (CE Code, Part I) and the (U.S.) National Electrical Code (NEC), on circuits having a nominal voltage not exceeding 600 V.
| DevelopmentNote |
Jointly published by CSA and UL. Also numbered as UL 2158. (04/2014)
|
| DocumentType |
Standard
|
| Pages |
163
|
| PublisherName |
Canadian Standards Association
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| CSA C22.2 No. 3 : 1988 : R2004 | ELECTRICAL FEATURES OF FUEL-BURNING EQUIPMENT |
| CSA C22.2 No. 3 : 1988 : R2014 | ELECTRICAL FEATURES OF FUEL-BURNING EQUIPMENT |
| CSA C22.2 No. 53:1968:R2014 | ELECTRIC WASHING MACHINES |
| CSA C22.2 No. 24 : 2015 | TEMPERATURE-INDICATING AND -REGULATING EQUIPMENT |
| CSA C22.2 No. 53 : 1968 | ELECTRIC WASHING MACHINES |
| CSA C22.2 No. 53 : 1968 : R2004 | ELECTRIC WASHING MACHINES |
| CSA C22.2 No. 169 : 2015 | ELECTRIC CLOTHES WASHING MACHINES AND EXTRACTORS |
| ASSE 1001 : 2017 | PERFORMANCE REQUIREMENTS FOR ATMOSPHERIC TYPE VACUUM BREAKERS |
| UL 1411:7ED 2016-01 | Standard for Transformers and Motor Transformers for Use in Audio-, Radio-, and Television-Type Appliances |
| CSA C22.2 No. 94.1 : 2015 | ENCLOSURES FOR ELECTRICAL EQUIPMENT, NON-ENVIRONMENTAL CONSIDERATIONS |
| CSA C22.2 No. 38 : 2014 | THERMOSET-INSULATED WIRES AND CABLES |
| CSA E60730.2.9 : 2015 | AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2-9: PARTICULAR REQUIREMENTS FOR TEMPERATURE SENSING CONTROLS |
| CSA C361 : 2016 | ENERGY PERFORMANCE AND DRUM VOLUME OF HOUSEHOLD ELECTRIC CLOTHES DRYERS |
| UL 514A:11ED 2013-02 | Metallic Outlet Boxes |
| CSA C22.2 No. 223 : 2015 | POWER SUPPLIES WITH EXTRA-LOW-VOLTAGE CLASS 2 OUTPUTS |
| UL 60065:8ED 2015-09 | Standard for Audio, Video and Similar Electronic Apparatus - Safety Requirements |
| UL 5085-3:1ED 2006-04 | Low Voltage Transformers - Part 3: Class 2 and Class 3 Transformers |
| IEC 61000-4-4 : 3.0EN+(REDLINE+VERSION) | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-4: TESTING AND MEASUREMENT TECHNIQUES - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST |
| C22.1-15 | Canadian Electrical Code, Part I (23rd Edition), Safety Standard for Electrical Installations |
| CSA C22.2 No. 60065 : 2016 | AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS |
| CSA C22.2 No. 49 : 2014 | FLEXIBLE CORDS AND CABLES |
| CSA C22.2 No. 77 : 2014 | MOTORS WITH INHERENT OVERHEATING PROTECTION |
| UL 4200A:1ED 2015-02 | Products Incorporating Button Batteries or Coin Cell Batteries |
| CSA C22.2 No. 0.4 : 2004(R2013) | BONDING OF ELECTRICAL EQUIPMENT |
| CSA C22.2 No. 0.5 : 2016 | THREADED CONDUIT ENTRIES |
| IEC 61000-4-11:2004+AMD1:2017 CSV | Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests |
| UL 1097:6ED 2012-02 | Double Insulation Systems for Use in Electrical Equipment |
| UL 60335-1:6ED 2016-10 | Standard for Safety of Household and Similar Appliances, Part 1: General Requirements |
| CSA C22.2 No. 21 : 2014 | CORD SETS AND POWER-SUPPLY CORDS |
| UL 1283:7ED 2017-05 | Electromagnetic Interference Filters |
| UL 2157:3ED 2015-11 | Electric Clothes Washing Machines and Extractors |
| CSA C22.2 No. 24 : 2015 | TEMPERATURE-INDICATING AND -REGULATING EQUIPMENT |
| CSA B64.1.1 : 2011 | VACUUM BREAKERS, ATMOSPHERIC TYPE (AVB) |
| UL 935:10ED 2001-05 | Fluorescent-Lamp Ballasts |
| UL 83:16ED 2017-07 | Standard for Thermoplastic-Insulated Wires and Cables |
| UL 514D:2ED 2013-06 | Cover Plates for Flush-Mounted Wiring Devices |
| IEC 61000-4-4:2012 RLV | Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test |
| CSA C22.2 No. 139 : 2013 | ELECTRICALLY OPERATED VALVES |
| CSA C22.2 No. 0.2 : 2016 | INSULATION COORDINATION |
| IEC 60695-2-11:2014 | Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT) |
| UL 917:5ED 2006-11 | Standard for Clock-Operated Switches |
| IEC 60127-1:2006+AMD1:2011+AMD2:2015 CSV | Miniature fuses - Part 1: Definitions for miniature fuses andgeneral requirements for miniature fuse-links |
| C22.2 NO. 43-17 | Lampholders (Binational standard with UL 496) |
| UL 635:3ED 2012-03 | Insulating Bushings |
| CSA E60384.1 : 2014 | FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION |
| CSA C22.2 No. 250.13 : 2017 | LIGHT EMITTING DIODE (LED) EQUIPMENT FOR LIGHTING APPLICATIONS |
| UL 66 : 1 | FIXTURE WIRE |
| IEC 60695-2-13:2010+AMD1:2014 CSV | Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods- Glow-wire ignition temperature (GWIT) test method for materials |
| UL 60730-2-9:4ED 2017-02 | Automatic Electrical Controls - Part 2-9: Particular Requirements for Temperature Sensing Controls |
| IEC 61000-4-6 : 4.0 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-6: TESTING AND MEASUREMENT TECHNIQUES - IMMUNITY TO CONDUCTED DISTURBANCES, INDUCED BY RADIO-FREQUENCY FIELDS |
| IEC 61000-4-6:2013 | Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
| UL 514C:4ED 2014-04 | Nonmetallic Outlet Boxes, Flush-Device Boxes, and Covers |
| CSA E730.2.7 : 1994 | AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2: PARTICULAR REQUIREMENTS FOR TIMERS AND TIME SWITCHES |
| CSA C22.2 No. 108 : 2014 | LIQUID PUMPS |
| ASTM B 344 : 2014 : REDLINE | Standard Specification for Drawn or Rolled Nickel-Chromium and Nickel-Chromium-Iron Alloys for Electrical Heating Elements |
| CSA C22.2 No. 190 : 2014 | CAPACITORS FOR POWER FACTOR CORRECTION |
| CSA C22.2 No. 65 : 2013 | WIRE CONNECTORS |
| CSA C22.2 No. 188 : 2013 | SPLICING WIRE CONNECTORS |
| CSA E60730.1 : 2015 | Automatic electrical controls for household and similar use — Part 1: General requirements |
| UL 499:14ED 2014-11 | Electric Heating Appliances |
| CSA E60730.2.8 : 2001 | AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2-8: PARTICULAR REQUIREMENTS FOR ELECTRICALLY OPERATED WATER VALVES, INCLUDING MECHANICAL REQUIREMENTS |
| CSA C22.2 No. 0.15 : 2015 | ADHESIVE LABELS |
| NFPA 70 : 2017 | NATIONAL ELECTRICAL CODE |
| C22.2 NO. 8-13 (R2018) | Electromagnetic interference (EMI) filters |
| IEC 61000-4-2:2008 | Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
| IEC 60695-11-10:2013 | Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods |
| IEC 61000-4-3:2006+AMD1:2007+AMD2:2010 CSV | Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test |
| CSA C22.2 No. 250.4 : 2014 | PORTABLE LUMINAIRES |
| CSA C22.2 No. 210 : 2015 | APPLIANCE WIRING MATERIAL PRODUCTS |
| CSA C22.2 No. 127 : 2015 | EQUIPMENT AND LEAD WIRES |
| CSA C22.2 No. 182.3 : 2016 | SPECIAL USE ATTACHMENT PLUGS, RECEPTACLES, AND CONNECTORS |
| C22.2 NO. 75-17 | Thermoplastic insulated wires and cables (Trinational standard with UL 83 and NMX-J-010-ANCE-2017) |
| CSA C22.2 No. 100 : 2014 | MOTORS AND GENERATORS |
| UL 746A:6ED 2012-09 | Polymeric Materials - Short Term Property Evaluations |
| UL 429:7ED 2013-11 | Electrically Operated Valves |
| C22.2 NO. 4248.1-17 | Fuseholders Part 1: General requirements (Trinational standard with UL 4248-1 and NMX-J-009/4248/1-ANCE) |
| UL 248-1 : 3 | LOW-VOLTAGE FUSES - PART 1: GENERAL REQUIREMENTS |
| UL 60730-1:5ED 2016-08 | Automatic Electrical Controls - Part 1: General Requirements |
| CSA C22.2 No. 2556 : 2015 | WIRE AND CABLE TEST METHODS |
| C22.2 NO. 236-15 | Heating and cooling equipment (Bi-national standard with UL 1995) |
| UL 778:6ED 2016-07 | Motor-Operated Water Pumps |
| CSA C22.2 No. 74 : 2016 | EQUIPMENT FOR USE WITH ELECTRIC DISCHARGE LAMPS |
| UL 1577:5ED 2014-04 | Optical Isolators |
| UL 1004-2:2ED 2014-01 | Standard for Impedance Protected Motors |
| CSA C22.2 No. 14 : 2013 | INDUSTRIAL CONTROL EQUIPMENT |
| CSA C22.2 No. 55 : 2015 | SPECIAL USE SWITCHES |
| CSA C22.2 No. 177 : 2013 | CLOCK-OPERATED SWITCHES |
| CSA C22.2 No. 169 : 2015 | ELECTRIC CLOTHES WASHING MACHINES AND EXTRACTORS |
| UL 496:14ED 2017-09 | Lampholders |
| CSA E60384.14 : 2014 | FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 14: SECTIONAL SPECIFICATION - FIXED CAPACITORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION AND CONNECTION TO THE SUPPLY MAINS |
| IEC 61000-4-13:2002+AMD1:2009+AMD2:2015 CSV | Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement techniques - Harmonics and interharmonics includingmains signalling at a.c. power port, low frequency immunity tests |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.