CSA O112 SERIES : 0
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
CSA STANDARDS FOR WOOD ADHESIVES
Hardcopy , PDF
02-01-2011
English
Technical Committee on Wood Adhesives
Preface
Reference Publications
Standards
O112.0
Definitions and Standard Test Methods for Wood
Adhesives
1 Scope
2 Definitions
3 Tests
3.1 Shear Strength by Compression Loading
3.2 Plywood Shear Test
3.3 Delamination Test
3.4 Creep Test
4 Sampling
4.1 General
4.2 Sampling Procedure
4.3 Packaging and Shipping
5 Preparation for Delivery
5.1 Packaging
5.2 Labelling or Marking
5.3 Instructions for use
Appendix A - 3-Day Vacuum-Pressure Delamination Test
O112.1
Animal Glues for Wood
1 Scope
1.1 Scope
1.2 Classification
2 General Requirements
2.1 Reference Publication
2.2 Composition
3 Test Requirements
3.1 Type I and Type III Glues
3.2 Type II Glues
4 Test Procedures
4.1 General
4.2 Type I and Type III
4.3 Type II Glues
5 Sampling
6 Retest and Rejection
7 Preparation for Delivery
O112.2
Starch Glues for Wood
1 Scope
1.1 Scope
1.2 Classification
2 General Requirements
2.1 Reference Publication
2.2 Composition
2.3 Mixing Properties
3 Test Requirements
3.1 Shear Strength
4 Test Procedures
4.1 General
4.2 Shear Tests
5 Sampling
6 Retest and Rejection
6.1 Retest
6.2 Rejection
7 Preparation for Delivery
O112.3
Casein Glues for Wood
1 Scope
1.1 Scope
1.2 Classification
2 General Requirements
2.1 Reference Publication
2.2 Composition
2.3 Mixing Properties
3 Test Requirements
3.1 Shear Strength
3.2 Liquid Working Life
3.3 Storage Life
3.4 Creep-Type I Glues
4 Test Procedures
4.1 General
4.2 Shear Tests
4.3 Liquid Working Life
4.4 Creep Test
5 Sampling
6 Retest and Rejection
6.1 Retest
6.2 Rejection
7 Preparation for Delivery
O112.4
Polyvinyl Adhesives for Wood
1 Scope
1.1 Scope
1.2 Classification
2 General Requirements
2.1 Reference Publication
2.2 Composition
2.3 Form
3 Test Requirements
3.1 Total Solids
3.2 Ash Content
3.3 Viscosity
3.4 Shear Strength by Compression Loading
3.5 Heat Resistance
3.6 Stability
3.7 Storage Life
4 Test Procedures
4.1 Total Solids
4.2 Ash Content
4.3 Viscosity
4.4 Shear Test by Compression Loading
4.5 Heat Resistance
4.6 Stability
4.7 Interpretation and Reporting of Shear Test
Results
5 Sampling
6 Retest and Rejection
6.1 Retest
6.2 Rejection
7 Preparation for Delivery
O112.5
Urea Resin Adhesives for Wood (Room- and High-Temperature
Curing)
1 Scope
1.1 Scope
1.2 Classification
2 General Requirements
2.1 Reference Publication
2.2 Composition
2.3 Filler
2.4 Mixing Properties
3 Test Requirements
3.1 Insoluble Materials
3.2 Amylaceous Matter
3.3 pH of Cured Film
3.4 Shear Strength
3.5 Liquid Working Life
3.6 Storage Life
4 Test Procedures
4.1 General
4.2 Tests for Insoluble Material
4.3 Detection of Amylaceous Matter
4.4 pH of Cured Film
4.5 Shear Tests
4.6 Liquid Working Life
5 Sampling
6 Retest and Rejection
6.1 Retest
6.2 Rejection
7 Preparation for Delivery
O112.6
Phenol and Phenol-Resorcinol Resin Adhesives for Wood
(High-Temperature Curing)
1 Scope
1.1 Scope
1.2 Form of Adhesive
2 General Requirements
2.1 Reference Publication
2.2 Composition
2.3 Filler
2.4 Mixing Properties
3 Test Requirements
3.1 Insoluble Material
3.2 Amylaceous Matter
3.3 pH of Cured Film
3.4 Plywood Shear Strength
3.5 Liquid Working Life
3.6 Storage Life
4 Test Procedures
4.1 General
4.2 Tests for Insoluble Material
4.3 Detection of Amylaceous Matter
4.4 pH of Cured Film
4.5 Plywood Shear Tests
4.6 Liquid Working Life
5 Sampling
6 Retest and Rejection
6.1 Retest
6.2 Rejection
7 Preparation for Delivery
7.1 Packaging
O112.7
Resorcinol and Phenol-Resorcinol Resin Adhesives for
Wood (Room-and Intermediate-Temperature Curing)
1 Scope
1.1 Scope
1.2 Classification
2 General Requirements
2.1 Reference Publication
2.2 Composition
2.3 Filler
2.4 Mixing Properties
3 Test Requirements
3.1 Insoluble Material
3.2 Amylaceous Matter
3.3 pH of Cured Film
3.4 Shear Strength
3.5 Liquid Working Life
3.6 Storage Life
3.7 Delamination
3.8 Creep
4 Test Procedures
4.1 General
4.2 Tests for Insoluble Material
4.3 Detection of Amylaceous Matter
4.4 pH of Cured Film
4.5 Shear Tests
4.6 Liquid Working Life
4.7 Delamination Test
4.8 Creep Test
5 Sampling
6 Retest and Rejection
6.1 Retest
6.2 Rejection
7 Preparation for Delivery
7.1 Packaging
O112.8
Polyvinyl Adhesives-Cross Linking, for Wood
1 Scope
2 General Requirements
2.1 Reference Publication
2.2 Composition
2.3 Form of Adhesive
3 Types
4 Test Requirements
4.1 Total Solids
4.2 Ash Content
4.3 Viscosity
4.4 Shear Strength by Compression Loading (Types I
and II Adhesives)
4.5 Plywood Shear Strength
4.6 Storage Life (Types I and II Adhesives)
5 Test Procedures
5.1 Total Solids
5.2 Ash Content
5.3 Viscosity
5.4 Shear Test by Compression Loading
5.5 Plywood Shear Test
5.6 Interpretation and Reporting of Shear Test
Results
6 Sampling
7 Retest and Rejection
7.1 Retest
7.2 Rejection
8 Preparation for Delivery
Important note : All end users must be registered with an Account prior to user licenses being assigned.Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.