• There are no items in your cart

CSA S16 : 2014

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

DESIGN OF STEEL STRUCTURES
Available format(s)

Hardcopy , PDF

Superseded date

06-01-2019

Language(s)

English, French

Published date

01-01-2014

Preface
1 Scope and application
2 Reference publications
3 Definitions and symbols
4 Structural documents
5 Material - Standards and identification
6 Design requirements
7 Factored loads and safety criterion
8 Analysis of structure
9 Stability of structures and members
10 Design lengths and slenderness ratios
11 Width (or diameter)-to-thickness - Elements in
   compression
12 Gross and net areas
13 Member and connection resistance
14 Beams and girders
15 Trusses
16 Open-web steel joists
17 Composite beams, trusses, and joists
18 Composite columns
19 Built-up members
20 Plate walls
21 Connections
22 Design and detailing of bolted connections
23 Installation and inspection of bolted joints
24 Welding
25 Column bases and anchor rods
26 Fatigue
27 Seismic design
28 Shop and field fabrication and coating
29 Erection
30 Inspection
Annex A (informative) - Standard practice for structural
        steel
Annex B (informative) - Margins of safety
Annex C (normative) - Crane-supporting structures
Annex D (informative) - Recommended maximum values
        for deflections for specified design live, snow, and
        wind loads
Annex E (informative) - Floor vibrations
Annex F (informative) - Effective lengths of columns
Annex G (informative) - Criteria for estimating effective
        column lengths in continuous frames
Annex H (informative) - Deflections of composite beams,
        joists, and trusses due to shrinkage of concrete
Annex I (informative) - Arbitration procedure for
        pretensioning connections
Annex J (normative) - Qualification testing provisions for
        seismic moment connections and buckling restrained
        braces
Annex K (normative) - Structural design for fire conditions
Annex L (informative) - Design to prevent brittle fracture
Annex M (informative) - Seismic design of industrial steel
        structures
Annex N (normative) - Design and construction of steel
        storage racks

Specifies rules and requirements for the design, fabrication, and erection of steel structures.

DevelopmentNote
Supersedes CSA S16.1. (07/2002) 2009 Edition is still active, available in English & French. (07/2014) French Edition issued on 01-07-2015. (09/2015)
DocumentType
Standard
Pages
217
PublisherName
Canadian Standards Association
Status
Superseded
SupersededBy
Supersedes

CSA S832 : 2014 SEISMIC RISK REDUCTION OF OPERATIONAL AND FUNCTIONAL COMPONENTS (OFCS) OF BUILDINGS
CSA N289.1 : 2008 GENERAL REQUIREMENTS FOR SEISMIC DESIGN AND QUALIFICATION OF CANDU NUCLEAR POWER PLANTS
CSA B354.5 : 2007 : R2016 MAST-CLIMBING WORK PLATFORMS
CSA A344.1/A344.2 : 2005 USER GUIDE FOR STEEL STORAGE RACKS/STANDARD FOR THE DESIGN AND CONSTRUCTION OF STEEL STORAGE RACKS
CSA N289.3 : 2010 : INC : UPD 1 : 2012 DESIGN PROCEDURES FOR SEISMIC QUALIFICATION OF NUCLEAR POWER PLANTS
N289.3-10 (R2015) Design procedures for seismic qualification of nuclear power plants
CSA S367 : 2012 AIR-, CABLE-, AND FRAME-SUPPORTED MEMBRANE STRUCTURES
CSA N292.2 : 2007 INTERIM DRY STORAGE OF IRRADIATED FUEL
BS EN ISO 19901-3:2014 Petroleum and natural gas industries. Specific requirements for offshore structures Topsides structure
B354.12-17 Design, calculations, safety requirements, and test methods for mast climbing transport platforms (MCTPs)
Z248-17 Code for tower cranes
CSA S413 : 2014 PARKING STRUCTURES
14/30300516 DC : 0 BS EN ISO 19901-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - SPECIFIC REQUIREMENTS FOR OFFSHORE STRUCTURES - PART 3: TOPSIDES STRUCTURE
17/30298929 DC : DRAFT SEP 2017 BS EN ISO 19906 - PETROLEUM AND NATURAL GAS INDUSTRIES - ARCTIC OFFSHORE STRUCTURES
CSA S136-12 PACKAGE : 2012 CONSISTS OF S136-12 - NORTH AMERICAN SPECIFICATION FOR THE DESIGN OF COLD-FORMED STEEL STRUCTURAL MEMBERS AND S136.1-12 - COMMENTARY ON NORTH AMERICAN SPECIFICATION FOR THE DESIGN OF COLD-FORMED STEEL STRUCTURAL MEMBERS
CSA S471 : 2004 GENERAL REQUIREMENTS, DESIGN CRITERIA, THE ENVIRONMENT, AND LOADS
CSA S448.1 : 2010 : R2015 REPAIR OF REINFORCED CONCRETE IN BUILDINGS AND PARKING STRUCTURES
09/19984091 DC : DRAFT JAN 2009 BS EN ISO 19906 - PETROLEUM AND NATURAL GAS INDUSTRIES - ARCTIC OFFSHORE STRUCTURES
CSA Z271 : 2010 : R2015 SAFETY CODE FOR SUSPENDED PLATFORMS
CSA ISO 19906 : 2011 PETROLEUM AND NATURAL GAS INDUSTRIES - ARCTIC OFFSHORE STRUCTURES
S408-11 Guidelines for the development of limit states design standards
CSA Z271 : 2010 : INC : UPD 1 : 2011 SAFETY CODE FOR SUSPENDED PLATFORMS
CSA S448.1 : 2010 REPAIR OF REINFORCED CONCRETE IN BUILDINGS AND PARKING STRUCTURES
CSA S473 : 2004 STEEL STRUCTURES
ISO 19906:2010 Petroleum and natural gas industries Arctic offshore structures
A344-17 User guide for steel storage racks
Z276-18 Liquefied natural gas (LNG) - Production, storage, and handling
CSA S37 : 2013 ANTENNAS, TOWERS, AND ANTENNA-SUPPORTING STRUCTURES
CSA C22.3 No. 1 : 2010 : INC : UPD 1 : 2011 : R2015 OVERHEAD SYSTEMS
CSA C61400-2:2008 WIND TURBINES - PART 2: DESIGN REQUIREMENTS FOR SMALL WIND TURBINES
B354.9-17 Design, calculations, safety requirements, and test methods for mast climbing work platforms (MCWPs)
ASME A17.7 : 2007 : R2012 PERFORMANCE-BASED SAFETY CODE FOR ELEVATORS AND ESCALATORS
ASME A17.7 : 2007 PERFORMANCE-BASED SAFETY CODE FOR ELEVATORS AND ESCALATORS
CSA N287.3:14 (R2019) Design requirements for concrete containment structures for nuclear power plants
CSA A660 : 2010 CERTIFICATION OF MANUFACTURERS OF STEEL BUILDING SYSTEMS
07/30092995 DC : 0 BS EN ISO 19901-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - SPECIFIC REQUIREMENTS FOR OFFSHORE STRUCTURES - PART 3: TOPSIDES STRUCTURE
BS EN ISO 19906:2010 Petroleum and natural gas industries. Arctic offshore structures
CSA Z259.16 : 2015 DESIGN OF ACTIVE FALL-PROTECTION SYSTEMS
CSA ISO 19906 : 2011 : R2016 PETROLEUM AND NATURAL GAS INDUSTRIES - ARCTIC OFFSHORE STRUCTURES
CSA S269.1 : 2016 FALSEWORK AND FORMWORK
AISC 341 : 2016 SEISMIC PROVISIONS FOR STRUCTURAL STEEL BUILDINGS
CSA C61400-2 : 2008 : R2013 WIND TURBINES - PART 2: DESIGN REQUIREMENTS FOR SMALL WIND TURBINES
N289.1-08 (R2013) General requirements for seismic design and qualification of CANDU nuclear power plants
CSA N289.1 : 2008 : INC : UPD 1 : 2014: R201300 GENERAL REQUIREMENTS FOR SEISMIC DESIGN AND QUALIFICATION OF CANDU NUCLEAR POWER PLANTS
CSA N289.1 : 2008 : INC : UPD 1 : 2015 : R201300 GENERAL REQUIREMENTS FOR SEISMIC DESIGN AND QUALIFICATION OF CANDU NUCLEAR POWER PLANTS
N291-15 Requirements for safety-related structures for nuclear power plants
N285.0-17/N285.6 SERIES-17 General requirements for pressure-retaining systems and components in CANDU nuclear power plants / Material Standards for reactor components for CANDU nuclear power plants
S6-14 Canadian Highway Bridge Design Code
CSA B44.7 : 2007 : R2012 PERFORMANCE-BASED SAFETY CODE FOR ELEVATORS AND ESCALATORS
CSA Z241 SERIES : 2003 : INC : UPD 2 : 2013 : R200800 PARK MODEL TRAILERS
CSA Z241 SERIES : 2003 : INC : UPD 2 : 2013 : R201300 PARK MODEL TRAILERS
CSA S806: 2012 DESIGN AND CONSTRUCTION OF BUILDING STRUCTURES WITH FIBRE-REINFORCED POLYMERS
CSA C22.3 No. 1 : 2015(R2020) OVERHEAD SYSTEMS
CSA Z271:20 Design of suspended access equipment
ASME A17.7-2007/CSA B44.7-07 (R2017) Performance-Based Safety Code for Elevators and Escalators (Bi-National standard, with ASME A17.7)
CSA Z241 SERIES : 2003 PARK MODEL TRAILERS
CSA ISO 19901-3 : 2015 PETROLEUM AND NATURAL GAS INDUSTRIES - SPECIFIC REQUIREMENTS FOR OFFSHORE STRUCTURES - PART 3: TOPSIDES STRUCTURE
CSA B44.7 : 2007 PERFORMANCE-BASED SAFETY CODE FOR ELEVATORS AND ESCALATORS
S806-12 (R2017) Design and construction of building structures with fibre-reinforced polymers
CSA N292.2 : 2007 : R2013 INTERIM DRY STORAGE OF IRRADIATED FUEL
AISC 360 : 2016 SPECIFICATION FOR STRUCTURAL STEEL BUILDINGS
I.S. EN ISO 19901-3:2014 PETROLEUM AND NATURAL GAS INDUSTRIES - SPECIFIC REQUIREMENTS FOR OFFSHORE STRUCTURES - PART 3: TOPSIDES STRUCTURE (ISO 19901-3:2014)
CSA S850 : 2012 DESIGN AND ASSESSMENT OF BUILDINGS SUBJECTED TO BLAST LOADS
CSA B354.5 : 2007 : INC : UPD 1 : 2008 : R2011 MAST-CLIMBING WORK PLATFORMS
S850-12 (R2017) Design and assessment of buildings subjected to blast loads
S157-17/S157.1-17 Strength design in aluminum / Commentary on CSA S157-17, Strength design in aluminum
CSA B354.5:2007 MAST-CLIMBING WORK PLATFORMS
CSA S304.1 : 2004 DESIGN OF MASONRY STRUCTURES
UNI EN ISO 19906 : 2012 PETROLEUM AND NATURAL GAS INDUSTRIES - ARCTIC OFFSHORE STRUCTURES
API 2N : 2015 PLANNING, DESIGNING, AND CONSTRUCTING STRUCTURES AND PIPELINES FOR ARCTIC CONDITIONS
CSA S367 : 2012 : R2016 AIR-, CABLE-, AND FRAME-SUPPORTED MEMBRANE STRUCTURES
CSA C61400-2 : 2008 : R2018 WIND TURBINES - PART 2: DESIGN REQUIREMENTS FOR SMALL WIND TURBINES
CSA C22.3 No. 1 : 2010 OVERHEAD SYSTEMS
ISO 19901-3:2014 Petroleum and natural gas industries — Specific requirements for offshore structures — Part 3: Topsides structure
CSA O86 : 2014 ENGINEERING DESIGN IN WOOD
EN ISO 19901-3:2014 Petroleum and natural gas industries - Specific requirements for offshore structures - Part 3: Topsides structure (ISO 19901-3:2014)
EN ISO 19906:2010 Petroleum and natural gas industries - Arctic offshore structures (ISO 19906:2010)
CSA A660 : 2010 : INC : UPD 1 : 2010 : R2014 CERTIFICATION OF MANUFACTURERS OF STEEL BUILDING SYSTEMS
A23.3-14 Design of concrete structures
N287.2-17 Material requirements for concrete containment structures for nuclear power plants
CSA Z271 : 2010 SAFETY CODE FOR SUSPENDED PLATFORMS
CSA N289.3 :2010 DESIGN PROCEDURES FOR SEISMIC QUALIFICATION OF NUCLEAR POWER PLANTS
CSA S304 : 2014 DESIGN OF MASONRY STRUCTURES
B167-16 Overhead cranes, gantry cranes, monorails, hoists, and jib cranes
CSA S269.2 : 2016 ACCESS SCAFFOLDING FOR CONSTRUCTION PURPOSES
W59-13 Welded steel construction (metal arc welding)
A500-16 Building guards
I.S. EN ISO 19906:2010 PETROLEUM AND NATURAL GAS INDUSTRIES - ARCTIC OFFSHORE STRUCTURES
S6.1-14 Commentary on S6-14, Canadian Highway Bridge Design Code

CSA S304 : 2014 DESIGN OF MASONRY STRUCTURES
W59-13 Welded steel construction (metal arc welding)
NACE 3 : 2007 COMMERCIAL BLAST CLEANING
SSPC-SP 12 : 2002 SURFACE PREPARATION AND CLEANING OF METALS BY WATERJETTING PRIOR TO RECOATING
CSA A370 : 2014 CONNECTORS FOR MASONRY
ISO 9712:2012 Non-destructive testing Qualification and certification of NDT personnel
CSA S136.1 : 2007 COMMENTARY ON NORTH AMERICAN SPECIFICATION FOR THE DESIGN OF COLD-FORMED STEEL STRUCTURAL MEMBERS
CSA B95 : 62(R2002) SURFACE TEXTURE (ROUGHNESS, WAVINESS, AND LAY)
AISC 341 : 2016 SEISMIC PROVISIONS FOR STRUCTURAL STEEL BUILDINGS
SSPC-SP 11 : 2012 POWER-TOOL CLEANING TO BARE METAL
SAE J 429 : 2014 MECHANICAL AND MATERIAL REQUIREMENTS FOR EXTERNALLY THREADED FASTENERS
SSPC-SP 10 : 2015 NEAR-WHITE BLAST CLEANING
CSA W48 : 2014 FILLER METALS AND ALLIED MATERIALS FOR METAL ARC WELDING
SSPC-SP 14 : 2015 INDUSTRIAL BLAST CLEANING
AISC 358 : 2016 PREQUALIFIED CONNECTIONS FOR SPECIAL AND INTERMEDIATE STEEL MOMENT FRAMES FOR SEISMIC APPLICATIONS
ASTM A 913/A913M : 2015 : REDLINE Standard Specification for High-Strength Low-Alloy Steel Shapes of Structural Quality, Produced by Quenching and Self-Tempering Process (QST)
EN 1994-1-2:2005/A1:2014 EUROCODE 4 - DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN
ASTM A 563 : 2015 : REDLINE Standard Specification for Carbon and Alloy Steel Nuts
A23.3-14 Design of concrete structures
CSA G40.20 G40.21 : 2013 GENERAL REQUIREMENTS FOR ROLLED OR WELDED STRUCTURAL QUALITY STEEL/STRUCTURAL QUALITY STEEL
W178.2-14 Certification of welding inspectors
EN 1992-1-2:2004/AC:2008 EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN
ASTM A 27/A27M : 2017 : REDLINE Standard Specification for Steel Castings, Carbon, for General Application
NACE 4 : 2007 BRUSH-OFF BLAST CLEANING
SSPC-SP 6 : 2015 COMMERCIAL BLAST CLEANING
CSA G164 : 1992 HOT DIP GALVANIZING OF IRREGULARLY SHAPED ARTICLES
ISO/IEC 17024:2012 Conformity assessment — General requirements for bodies operating certification of persons
NACE 5 : 2002 SURFACE PREPARATION AND CLEANING OF METALS BY WATERJETTING PRIOR TO RECOATING
ANSI MH16.1 : 2012 SPECIFICATION FOR THE DESIGN, TESTING AND UTILIZATION OF INDUSTRIAL STEEL STORAGE RACKS
CGSB 48.9712 : 2014 NON-DESTRUCTIVE TESTING - QUALIFICATION AND CERTIFICATION OF PERSONNEL
SSPC-SP 5 : 2015 WHITE METAL BLAST CLEANING
ASTM A 1085 : 2013 Standard Specification for Cold-Formed Welded Carbon Steel Hollow Structural Sections (HSS)
EN 1993-1-2:2005/AC:2009 EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN
CSA A23.1 A23.2 : 2014 CONCRETE MATERIALS AND METHODS OF CONCRETE CONSTRUCTION/TEST METHODS AND STANDARD PRACTICES FOR CONCRETE
ASTM A 958/A958M : 2017 : REDLINE Standard Specification for Steel Castings, Carbon and Alloy, with Tensile Requirements, Chemical Requirements Similar to Standard Wrought Grades
NACE No. 8/SSPC-SP 14:2007 INDUSTRIAL BLAST CLEANING
CSA G189 : 0 SPRAYED METAL COATINGS FOR ATMOSPHERIC CORROSION PROTECTION
EN 15512:2009 Steel static storage systems - Adjustable pallet racking systems - Principles for structural design
A344-17 User guide for steel storage racks
W178.1-14 Certification of welding inspection organizations
SSPC-SP 7 : 2015 BRUSH-OFF BLAST CLEANING

View more information
US$225.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.