CSA Z107.10 : 2006
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
GUIDE FOR THE USE OF ACOUSTICAL STANDARDS IN CANADA
Hardcopy , PDF
10-31-2011
English
01-01-2006
Technical Committee on Acoustics and Noise Control
Preface
1 Scope
2 Terminology
2.1 Introduction
2.2 ANSI S1.1-1994 (R2004), Acoustical Terminology
3 Building acoustics
3.1 Introduction
3.2 ASTM C 384-04, Standard Test Method for Impedance
and Absorption of Acoustical Materials by
Impedance Tube Method
3.3 ASTM C 423-02a, Standard Test Method for Sound
Absorption and Sound Absorption Coefficients by
the Reverberation Room Method
3.4 ASTM E 90-04, Standard Test Method for Laboratory
Measurement of Airborne Sound Transmission Loss of
Building Partitions and Elements
3.5 ASTM E 336-05, Standard Test Method for Measurement
of Airborne Sound Insulation in Buildings
3.6 ASTM E 413-04, Classification for Rating Sound
Insulation
3.7 ASTM E 492-04, Standard Test Method for Laboratory
Measurement of Impact Sound Transmission Through
Floor-Ceiling Assemblies Using the Tapping Machine
3.8 ASTM E 596-96(2002)e1, Standard Test Method for
Laboratory Measurement of Noise Reduction of
Sound-Isolating Enclosures
3.9 ASTM E 795-00, Standard Practices for Mounting Test
Specimens During Sound Absorption Tests
3.10 ASTM E 966-04, Standard Guide for Field
Measurements of Airborne Sound Insulation of
Building Facades and Facade Elements
3.11 ASTM E 989-89(1999), Standard Classification for
Determination of Impact Insulation Class (IIC)
3.12 ASTM E 1007-04e1, Standard Test Method for Field
Measurement of Tapping Machine Impact Sound
Transmission Through Floor-Ceiling Assemblies and
Associated Support Structures
3.13 ASTM E 1332-90(2003), Standard Classification for
Determination of Outdoor-Indoor Transmission Class
3.14 ASTM E 2179-03e2, Standard Test Method for
Laboratory Measurement of the Effectiveness of Floor
Coverings in Reducing Impact Sound Transmission
Through Concrete Floors
4 Acoustical measuring equipment and calibration
4.1 ANSI S1.4-1983 (R2001), Specification for
Sound Level Meters
4.2 ANSI S1.11-2004, Specification for Octave-Band
and Fractional-Octave-Band Analog and Digital
Filters
4.3 ANSI S1.13-2005, Measurement of Sound Pressure
Levels in Air
4.4 IEC 61672-1:2002, Electroacoustics - Sound level
meters - Part 1: Specifications
5 Environmental noise
5.1 ISO 9613-1:1993, Acoustics - Attenuation of sound
during propagation outdoors - Part 1: Calculation
of the absorption of sound by the atmosphere
5.2 ISO 9613-2:1996, Acoustics - Attenuation of sound
during propagation outdoors - Part 2: General
method of calculation
5.3 CAN/CSA-ISO 1996-1:05, Acoustics - Description,
measurement and assessment of environmental
noise - Part 1: Basic quantities and assessment
procedures
5.4 CAN/CSA-ISO 1996-2:05, Acoustics - Description and
measurement of environmental noise - Part 2:
Acquisition of data pertinent to land use
5.5 CAN/CSA-ISO 1996-3:05, Acoustics - Description and
measurement of environmental noise - Part 3:
Application to noise limits
6 Hearing measurement and protection
6.1 CAN/CSA-Z94.2-02, Hearing Protection Devices -
Performance, Selection, Care, and Use
6.2 CSA CAN3-Z107.4-M86 (R2001), Pure Tone Air
Conduction Audiometers for Hearing Conservation and
for Screening
6.3 CAN/CSA-Z107.6-M90 (R2004), Pure Tone Air
Conduction Threshold Audiometry for Hearing
Conservation
7 Human exposure to vibration
7.1 CAN/CSA-M5007-03, Agricultural wheeled tractors -
Operator's seat - Laboratory measurement of
transmitted vibration
7.2 CAN/CSA-M5008-03, Agricultural wheeled tractors
and field machinery - Measurement of whole-body
vibration of the operator
7.3 ISO 5349-1:2001, Mechanical vibration -
Measurement and evaluation of human exposure to
hand-transmitted vibration - Part 1: General
requirements
7.4 ISO 5349-2:2001, Mechanical vibration -
Measurement and evaluation of human exposure to
hand-transmitted vibration - Part 2: Practical
guidance for measurement at the workplace
8 Industrial noise
8.1 CSA Z107.52-M1983 (R2004), Recommended Practice
for the Prediction of Sound Pressure Levels in
Large Rooms Containing Sound Sources
8.2 CSA CAN3-Z107.54-M85 (R2001), Procedure for
Measurement of Sound and Vibration Due to Blasting
Operations
8.3 CAN/CSA-Z107.55-M86 (R2001), Recommended
Practice for the Prediction of Sound Levels Received
at a Distance from an Industrial Plant
8.4 CSA Z107.56-06, Procedures for the measurement
of occupational noise exposure
8.5 CAN/CSA-Z107.58-02, Noise Emission Declarations
for Machinery
8.6 ISO 3740:2000, Acoustics - Determination of sound power
levels of noise sources - Guidelines for the
use of basic standards
8.7 ISO 3741:1999, Acoustics - Determination of sound power
levels of noise sources using sound
pressure - Precision methods for reverberation rooms
8.8 ISO 3743-1:1994, Acoustics - Determination of
sound power levels and noise sources - Engineering
methods for small, movable sources in reverberant fields -
Part 1: Comparison method for hard-walled
test rooms
8.9 ISO 3743-2:1994, Acoustics - Determination of sound
power levels and noise sources using sound
pressure - Engineering methods for small, movable
sources in reverberant fields - Part 2: Methods for
special reverberation test rooms
8.10 ISO 3744:1994, Acoustics - Determination of sound power
levels and noise sources using sound
pressure - Engineering method in an essentially free
field over a reflecting plane
8.11 ISO 3745:2003, Acoustics - Determination of sound
power levels of noise sources using sound
pressure - Precision methods for anechoic and
hemi-anechoic rooms
8.12 ISO 3746:1995, Acoustics - Determination of sound power
levels of noise sources using sound
pressure - Survey method using an enveloping measurement
surface over a reflecting plane
8.13 ISO 3747:2000, Acoustics - Determination of sound
power levels of noise sources using sound
pressure - Comparison method in situ
8.14 ISO 4871:1996, Acoustics - Declaration and verification
of noise emission values of machinery and
equipment
8.15 ISO 6926:1999, Acoustics - Requirements for the
performance and calibration of reference sound
sources used for the determination of sound power levels
8.16 ISO 9614-1:1993, Acoustics - Determination of sound
power levels of noise sources using sound
intensity - Part 1: Measurement at discrete points
8.17 ISO 9614-2:1996, Acoustics - Determination of sound
power levels of noise sources using sound
intensity - Part 2: Measurement by scanning
8.18 ISO 9614-3:2002, Acoustics - Determination of sound
power levels of noise sources using sound
intensity - Part 3: Precision method for measurement by
scanning
8.19 ISO 11201:1995, Acoustics - Noise emitted by
machinery and equipment - Measurement of emission
sound pressure levels at a work station and at other
specified positions - Engineering method in an
essentially free field over a reflecting plane
8.20 ISO 11202:1995, Acoustics - Noise emitted by
machinery and equipment - Measurement of emission
sound pressure levels at a work station and at other
specified positions - Survey method in situ
8.21 ISO 11203:1995, Acoustics - Noise emitted by
machinery and equipment - Determination of
emission sound pressure levels at a work station and
at other
specified positions from the sound power
level
8.22 ISO 11204:1995, Acoustics - Noise emitted by
machinery and equipment - Measurement of emission
sound pressure levels at a work station and at other
specified positions - Method requiring
environmental corrections
8.23 ISO 11205:2003, Acoustics - Noise emitted by machinery
and equipment - Engineering method for
the determination of emission sound pressure levels in
situ at the work station and at other specified
positions using sound intensity
9 Noise from powered machines (construction and agriculture)
9.1 Introduction
9.2 CAN/CSA-M5131-97 (R2002), Acoustics - Tractors and
machinery for agriculture and forestry -
Measurement of noise at the operator's position - Survey
method
9.3 ISO 4872:1978, Acoustics - Measurement of airborne
noise emitted by construction equipment
intended for outdoor use - Method for determining
compliance with noise limits
9.4 ISO 6393:1998, Acoustics - Measurement of exterior
noise emitted by earth-moving machinery -
Stationary test conditions
9.5 ISO 6394:1998, Acoustics - Measurement at the operator's
position of noise emitted by earth-moving
machinery - Stationary test conditions
9.6 ISO 6395:1988, Acoustics - Measurement of exterior noise
emitted by earth-moving machinery -
Dynamic test conditions
9.7 SAE J919:1995, Sound Measurement - Off-Road Work
Machines - Operator - Singular Type
9.8 SAE J1096-2000, Measurement of Exterior Sound
Levels for Heavy Trucks Under Stationary
Conditions
10 Transportation noise
10.1 Introduction
10.2 CAN/CSA-Z107.9-00 (R2004), Standard for Certification
of Noise Barriers
10.3 ISO 2922:2000, Acoustics - Measurement of airborne
sound emitted by vessels on inland waterways
and harbours
10.4 ISO 5130:1982, Acoustics - Measurement of noise
emitted by stationary road vehicles - Survey
method
10.5 ISO 7188:1994, Acoustics - Measurement of noise
emitted by passenger cars under conditions
representative of urban driving
10.6 ISO 14509:2000, Small craft - Measurement of airborne
sound emitted by powered recreational craft
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.