CSA Z240 MH SERIES : 2016
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
MANUFACTURED HOMES
Hardcopy , PDF
07-01-2021
French, English
06-01-2016
Preface
Z240.0.1-16, General requirements for manufactured homes
1 Scope
2 Reference publications
3 Definitions
4 General requirements
5 Markings
6 Provision of set-up instructions
Z240.1.1-16, Vehicular requirements for manufactured homes
1 Scope
2 Reference publications
3 Definitions
4 Couplings, tongues, and A-frames
5 Running gear
Z240.2.1-16, Technical requirements for manufactured homes
1 Scope
2 Reference publications
3 Definitions
4 General requirements
5 Materials - Remanufactured lumber
6 Structural design
7 Building envelope
8 Door hardware
9 Heating and air-conditioning - Compliance
10 Fuel-fired appliances
11 Ducting
12 Plumbing
13 Energy efficiency
14 Floor assemblies test
15 Deformation resistance test
16 Airtightness test for supply air duct systems
17 Markings and set-up instructions
Annex A (informative) - Commentary
Z240.4.1-16, Installation requirements for oil- and gas-fired
appliances in manufactured homes
1 Scope
2 Reference publications
3 Definitions
4 General requirement
5 Appliances
6 Combustion air supply for non-direct vent appliances
7 Venting
8 Oil tanks and piping systems
9 Piping, tubing, and fittings for gas systems
10 Piping installation for gas systems
11 Pressure and leak testing for gas systems
12 Markings
Annex A (informative) - Commentary
Contains: (a) Z240.0.1-16, General requirements for manufactured homes; (b) Z240.2.1-16, Technical requirements for manufactured homes; and (c) Z240.4.1-16, Installation requirements for oil- and gas-fired appliances in manufactured homes.
| DevelopmentNote |
Includes CSA Z240.0.1, CSA Z240.1.1, CSA Z240.2.1 and Z240.4.1. (04/2016) French translation is also available, see CSA Z240 MM SERIES. (06/2016)
|
| DocumentType |
Standard
|
| ISBN |
978-1-4883-0419-4
|
| Pages |
0
|
| PublisherName |
Canadian Standards Association
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| ANSI Z21.75 : 2016 | CONNECTORS FOR OUTDOOR GAS APPLIANCES AND MANUFACTURED HOMES |
| CSA 2.33 : 2017 | VENTED GAS FIREPLACE HEATERS |
| ANSI Z21.10.3-2017/CSA 4.3:2017 | GAS-FIRED WATER HEATERS, VOLUME 3, STORAGE WATER HEATERS WITH INPUT RATINGS ABOVE 75,000 BTU PER HOUR, CIRCULATING AND INSTANTANEOUS |
| CSA 4.1 : 2017 | GAS WATER HEATERS, VOLUME 1, STORAGE WATER HEATERS WITH INPUT RATINGS OF 75,000 BTU PER HOUR OR LESS |
| ANSI Z21.5.1-2017/CSA 7.1-2017 | Gas clothes dryers, volume I, type 1 clothes dryers |
| ANSI Z21.5.1-2017/CSA 7.1-2017 | GAS CLOTHES DRYERS, VOLUME 1, TYPE 1 CLOTHES DRYERS |
| CSA A277 : 2016 | PROCEDURE FOR CERTIFICATION OF PREFABRICATED BUILDINGS, MODULES, AND PANELS |
| C22.1-15 PACKAGE | Consists of C22.1-15, Canadian electrical code, part I (23rd edition), safety standard for electrical installations; C22.1HB-15, Canadian electrical code handbook - an explanation of rules of the Canadian electrical code, part I and the 2015 Electrical quick reference |
| Z240.10.1-16 | Site preparation, foundation, and installation of buildings |
| CSA 2.22 : 2016 | VENTED DECORATIVE GAS APPLIANCES |
| CSA B140.10 : 2006 | OIL-FIRED WARM-AIR HEATING APPLIANCES FOR MOBILE HOUSING AND RECREATIONAL VEHICLES |
| ANSI Z21.10.3 : 2015 | GAS-FIRED WATER HEATERS, VOLUME 3, STORAGE WATER HEATERS WITH INPUT RATINGS ABOVE 75,000 BTU PER HOUR, CIRCULATING AND INSTANTANEOUS |
| ANSI Z21.10.1 : 2017 | GAS WATER HEATERS, VOLUME 1, STORAGE WATER HEATERS WITH INPUT RATINGS OF 75,000 BTU PER HOUR OR LESS |
| C22.1HB-18 | Canadian Electrical Code Handbook - An Explanation of the Rules of the Canadian Electrical Code, Part I |
| CSA 6.27 : 2016 | CONNECTORS FOR OUTDOOR GAS APPLIANCES AND MANUFACTURED HOMES |
| CSA 2.3 : 2016 | GAS-FIRED CENTRAL FURNACES |
| ANSI Z21.60-2017/CSA 2.26-2017 | Decorative gas appliances for installation in solid-fuel burning fireplaces |
| ANSI Z21.50 : 2016 | VENTED DECORATIVE GAS APPLIANCES |
| CSA A770 : 2016 | HOME INSPECTION |
| ANSI Z21.88 : 2017 | VENTED GAS FIREPLACE HEATERS |
| ANSI Z21-10-3 : 2017 | GAS-FIRED WATER HEATERS, VOLUME 3, STORAGE WATER HEATERS WITH INPUT RATINGS ABOVE 75,000 BTU PER HOUR, CIRCULATING AND INSTANTANEOUS |
| CSA Z241 SERIES : 2003 : INC : UPD 2 : 2013 : R201300 | PARK MODEL TRAILERS |
| CSA Z241 SERIES : 2003 : INC : UPD 2 : 2013 : R200800 | PARK MODEL TRAILERS |
| CSA/ANSI Z21.10.1:19/CSA 4.1:19 | Gas water heaters, volume I, storage water heaters with input ratings of 75,000 Btu per hour or less |
| CSA Z241 SERIES : 2003 | PARK MODEL TRAILERS |
| ASHRAE HDBK REFRIGERATION : 2014 | ASHRAE HANDBOOK - REFRIGERATION |
| CSA B139 ON : 2006 | ONTARIO INSTALLATION CODE FOR OIL-BURNING EQUIPMENT |
| CSA CE CODE SAFETY PACKAGE : 2012 | CE CODE SAFETY PACKAGE |
| C22.10-10 | Québec Construction Code, Chapter V - Electricity Canadian Electrical Code, Part I (Twenty-first Edition) with Québec Amendments |
| S157-17/S157.1-17 | Strength design in aluminum / Commentary on CSA S157-17, Strength design in aluminum |
| ANSI Z21.47 : 2016 | GAS-FIRED CENTRAL FURNACES |
| ANSI Z21.60-2017/CSA 2.26-2017 | DECORATIVE GAS APPLIANCES FOR INSTALLATION IN SOLID-FUEL BURNING FIREPLACES |
| CSA B149HB : 2005 | NATURAL GAS AND PROPANE CODE HANDBOOK |
| CSA B149.2:20 | Propane storage and handling code |
| CSA B149.1 : 2010 : R2015 | NATURAL GAS AND PROPANE INSTALLATION CODE |
| CSA B149.1 : 2010 | NATURAL GAS AND PROPANE INSTALLATION CODE |
| CSA B149.2 : 2010 : R2015 | PROPANE STORAGE AND HANDLING CODE |
| CSA B149.2:2010 | PROPANE STORAGE AND HANDLING CODE |
| C22.1-18 | Canadian Electrical Code, Part I (24th Edition), Safety Standard for Electrical Installations |
| CSA A277 : 2016 | PROCEDURE FOR CERTIFICATION OF PREFABRICATED BUILDINGS, MODULES, AND PANELS |
| ANSI Z21.10.1 : 2014 | GAS WATER HEATERS, VOLUME 1, STORAGE WATER HEATERS WITH INPUT RATINGS OF 75,000 BTU PER HOUR OR LESS |
| CSA P.3 : 2004 | TESTING METHOD FOR MEASURING ENERGY CONSUMPTION AND DETERMINING EFFICIENCIES OF GAS-FIRED AND FUEL OIL-FIRED WATER HEATERS |
| CSA O86 : 2014 | ENGINEERING DESIGN IN WOOD |
| B149.3-15 | Code for the field approval of fuel-related components on appliances and equipment |
| CSA B140.7 : 2005 | OIL-BURNING EQUIPMENT: STEAM AND HOT-WATER BOILERS |
| B149.5-15 | Installation code for propane fuel systems and containers on motor vehicles |
| SAE J 1128 : 2015 | LOW VOLTAGE PRIMARY CABLE |
| Z240.10.1-16 | Site preparation, foundation, and installation of buildings |
| CSA 7.1 : 2016 | GAS CLOTHES DRYERS, VOLUME 1, TYPE 1 CLOTHES DRYERS |
| ANSI Z21.47 : 2016 | GAS-FIRED CENTRAL FURNACES |
| CSA 4.1 : 2014 | GAS WATER HEATERS, VOLUME 1, STORAGE WATER HEATERS WITH INPUT RATINGS OF 75,000 BTU PER HOUR OR LESS |
| ASTM C 834 : 2017 : REDLINE | Standard Specification for Latex Sealants |
| CSA C22.2 No. 0.15 : 2015 | ADHESIVE LABELS |
| ANSI Z21.19-2014/CSA 1.4-2014 | REFRIGERATORS USING GAS FUEL |
| ASTM A 539 : 1999 | Standard Specification for Electric-Resistance-Welded Coiled Steel Tubing for Gas and Fuel Oil Lines (Withdrawn 2004) |
| ASTM C 1311 : 2014 : REDLINE | Standard Specification for Solvent Release Sealants |
| CSA B139 : 2015 | INSTALLATION CODE FOR OIL-BURNING EQUIPMENT |
| ANSI/CSA-B149.6-15 | Code for digester gas, landfill gas, and biogas generation and utilization |
| CSA C191 : 2013 | PERFORMANCE OF ELECTRIC STORAGE TANK WATER HEATERS FOR DOMESTIC HOT WATER SERVICE |
| ANSI Z21.1 : 2016 | HOUSEHOLD COOKING GAS APPLIANCES |
| ANSI Z21.19 : 2014 | REFRIGERATORS USING GAS FUEL |
| ANSI Z21.5.1 : 2016 | GAS CLOTHES DRYERS, VOLUME 1, TYPE 1 CLOTHES DRYERS |
| BHMA A156.1 : 2016 | BUTTS AND HINGES |
| CSA 1.1 : 2016 | HOUSEHOLD COOKING GAS APPLIANCES |
| CSA 2.3 : 2016 | GAS-FIRED CENTRAL FURNACES |
| CSA B140.10 : 2006 | OIL-FIRED WARM-AIR HEATING APPLIANCES FOR MOBILE HOUSING AND RECREATIONAL VEHICLES |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.