Z462-18
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Workplace electrical safety
Hardcopy , PDF
01-26-2021
French, English
01-01-2018
Overview Now in its fourth edition, CSA Z462 – Workplace electrical safety aims to help workers install, operate, and maintain electrical equipment safely and provide additional safeguards to those who work in close proximity to energized electrical equipment. The Standard provides details on recognized methods for identifying electrical hazards & risk assessment, and defines best safety practices and training to help you work on and around electrical equipment. Based on the latest research, and in conjunction with the latest editions of NFPA 70E – Standard for Electrical Safety in the Workplace and the 2018 Canadian Electrical Code, Part I, the 2018 edition of CSA Z462 builds upon previous editions by including new definitions that harmonize with other safety standards such as CSA Z1000 and CSA Z1002 and those dealing with arc flash and shock hazards. It also features additional requirements aimed at establishing more robust electrical safety programs. Top 10 Changes to Know in the 2018 Edition • Further to the risk-based approach to safety, safety controls must be developed and prioritized based on documented risk assessments. • Requirements for condition of maintenance, periodic inspections, and program auditing have been added to the section on electrical safety programs. • The hierarchy of control is now mandatory with a new requirement that makes hazard elimination the first priority in the implementation of safety-related work practices. • Electrical safety programs are now required to include the investigation of “near miss” incidents. • The minimum threshold for potentially-hazardous energy has been reduced from 50V to 30V. • The process for shock risk assessment is now aligned with the arc flash risk assessment process. • Arc blast is now recognized as a category of electrical hazards. • The table on the selection of clothing and other PPE has been moved from Annex H to the criteria on arc flash risk assessment, making it part of the mandatory requirements. • The table on arc flash hazard identification is now affiliated with the arc flash risk assessment. • All training and auditing requirements have been relocated to Clause 4.1, following the establishment of an electrical safety program.
Preface This is the fourth edition of CSA Z462, Workplace electrical safety. It supersedes the previous editions published in 2015, 2012, and 2008. This Standard is based on NFPA 70E, Standard for Electrical Safety for the Workplace, and has been harmonized with Parts I, II, and III of the Canadian Electrical Code; CSA Z460, Control of hazardous energy — Lockout and other methods; and CSA M421, Use of electricity in mines. This revised edition of CSA Z462 has been developed by CSA Group from the original edition as promulgated by the National Fire Protection Association. In addition to its initial source, it includes significant revisions by CSA Group. This Standard is fully the responsibility of CSA Group. The NFPA, holder of the copyright in this edition, takes no responsibility for any portion thereof. This Standard specifies requirements for and provides guidance on safety management systems, safe work procedures, and selection of personal protective equipment and other safety devices for persons exposed to hazards associated with energized electrical equipment. In addition, this Standard sets out criteria for the identification and training of qualified electrical workers and for determination of hazardous work to be performed only by those qualified individuals. By permission of the National Fire Protection Association, many of the clauses, tables, and figures in this Standard have been copied from NFPA 70E. CSA Group wishes to thank the NFPA for its support throughout the development of this Standard. In this 2018 edition, where a major change or addition to the previous edition of this Standard has been made, the clause, table, or figure affected is identified by the symbol delta (Δ) in the margin. Users of this Standard are advised that the change markers in the text are not intended to be all-inclusive and are provided as a convenience only; such markers cannot constitute a comprehensive guide to the revisions made to this Standard. Care must therefore be taken not to rely on the change markers to determine the current requirements of this Standard. As always, users of this Standard must consider the entire Standard. The following is an overview of the major revisions to the 2018 edition: a) the definitions of \"arc flash hazard\" and \"shock hazard\" have been aligned with the definition of \"hazard\" (Clause 3); b) Clause 4.1.4 includes a new general requirement that hazard elimination be the first priority in the implementation of safety-related work practices; c) Clause 4.1.6 has several new electrical safety program requirements: i) the requirement to inspect newly installed or modified equipment has been added to Clause 4.1.6.2; ii) risk assessment has been revised in Clause 4.1.6.8.3 to include human error; iii) the hierarchy of risk control in Clause 4.1.6.8.4 has been moved into mandatory text; iv) the requirement to perform and document job safety planning has been added to Clause 4.1.6.9; and v) the requirement to investigate electrical incidents has been added to Clause 4.1.6.10; d) the minimum threshold for potentially-hazardous energy has been reduced from 50 V to 30 V (Clauses 4.1.9.1, 4.1.9.5, 4.3.2.1, 4.3.2.2.3, 4.3.4.6, 4.3.6.1, 4.3.6.3.2, 4.3.6.6, and 4.3.6.7); e) Clause 4.2 has been totally reorganized, including relocating all training and auditing requirements to Clause 4.1; f) in Clause 4.3.4, shock risk assessment has been aligned with the arc flash risk assessment in Clause 4.3.5; g) Table 2 (previously Table 4A) has been relocated from the arc flash PPE category method to the arc flash risk assessment in Clause 4.3.5; h) Table 3 (previously Table H.2) has been relocated from Annex H to Clause 4.3.5 (arc flash risk assessment); i) Annex F has been completely rewritten; and j) Annex K has been updated. This Standard has been developed in compliance with Standards Council of Canada requirements for National Standards of Canada. It has been published as a National Standard of Canada by CSA Group. Scope 1.1 General This Standard specifies requirements for workplace electrical safety necessary for the practical safeguarding of workers during activities such as the installation, removal, inspection, operation, maintenance, and demolition of electric conductors and electric equipment, as well as work in proximity of energized electrical equipment. 1.2 Application While it can be applied by organizations of any type or size, this Standard does not cover: a) installations in ships, watercraft other than floating buildings, railway rolling stock, aircraft, and automotive vehicles other than mobile homes and recreational vehicles; b) installations of railways for the generation, transformation, transmission, or distribution of power used exclusively for operation of rolling stock or installations used exclusively for signalling and communications; c) installations of communications equipment under the exclusive control of communications utilities located outdoors or in building spaces used exclusively for such installations; and d) installations under the exclusive control of an electric utility when such installations i) consist of service drops or service laterals, and associated metering; ii) are located in legally established easements or rights-of-way designated or recognized by public service commissions, utility commissions, or other regulatory agencies having jurisdiction for such installations; or iii) are on property owned or leased by the electric utility for communications or for metering, generation, control, transformation, transmission, or distribution of electric energy. 1.3 Suitability It is the responsibility of the users of this Standard to judge its suitability for their particular purpose (see Note 2 to the Preface). 1.4 Use with related standards and regulations This Standard is intended for use with Parts I, II, and III of the Canadian Electrical Code and other related Canadian workplace electrical safety standards (e.g., CSA M421 and CSA Z460), and should be used with such standards. In addition, users of this Standard should always refer to provincial, territorial, and federal safety regulations that have jurisdiction over their work facility, contract job site, or profession. 1.5 Organization of this Standard The requirements of this Standard are divided into three main clauses, as shown in Figure 1. Annexes A to W do not specify requirements and are included for information only. 1.6 Measurements The values given in SI units are the units of record for the purposes of this Standard. The values given in parentheses are for information and comparison only. 1.7 Terminology In this Standard, \"shall\" is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; \"should\" is used to express a recommendation or that which is advised but not required; and \"may\" is used to express an option or that which is permissible within the limits of the standard. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. Notes to tables and figures are considered part of the table or figure and may be written as requirements. Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application.
DevelopmentNote |
2015 Edition is still active. (01/2018)
|
DocumentType |
Standard
|
Pages |
0
|
PublisherName |
Canadian Standards Association
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
ISO/IEC 17065:2012 | Conformity assessment — Requirements for bodies certifying products, processes and services |
ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
IEEE 3007.1 : 2010 | RECOMMENDED PRACTICE FOR THE OPERATION AND MANAGEMENT OF INDUSTRIAL AND COMMERCIAL POWER SYSTEMS |
ASTM F 1505 : 2016 : REDLINE | Standard Specification for Insulated and Insulating Hand Tools |
CSA Z94.3 : 2015 | EYE AND FACE PROTECTORS |
CSA Z463 : 2013 | GUIDELINE ON MAINTENANCE OF ELECTRICAL SYSTEMS |
CSA C22.2 No. 157 : 1992 | INTRINSICALLY SAFE AND NON-INCENDIVE EQUIPMENT FOR USE IN HAZARDOUS LOCATIONS |
IEC TS 60479-1:2005+AMD1:2016 CSV | Effects of current on human beings and livestock - Part 1: Generalaspects |
CSA C22.2 No. 60079-18 : 2016 | EXPLOSIVE ATMOSPHERES - PART 18: EQUIPMENT PROTECTION BY ENCAPSULATION 'M' |
IEEE 3007.2 : 2010 | This recommended practice covers the maintenance of industrial and commercial power systems. |
CSA Z16602 : 2014 | PROTECTIVE CLOTHING FOR PROTECTION AGAINST CHEMICALS - CLASSIFICATION, LABELLING AND PERFORMANCE REQUIREMENTS |
C22.1-15 | Canadian Electrical Code, Part I (23rd Edition), Safety Standard for Electrical Installations |
IEEE C37.20.6-2015 | IEEE Standard for 4.76 kV to 38 kV Rated Ground and Test Devices Used in Enclosures |
ASTM F 496 : 2014-04 | SPECIFICATION FOR IN-SERVICE CARE OF INSULATING GLOVES AND SLEEVES |
CFR 29(PTS1900-1910) : 0 | LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR |
CSA Z1005 : 2017 | INCIDENT INVESTIGATION |
ASTM F 2675/F2675M : 2013 | Standard Test Method for Determining Arc Ratings of Hand Protective Products Developed and Used for Electrical Arc Flash Protection |
ASTM D 1049 : 1998 | Standard Specification for Rubber Insulating Covers |
CSA C22.2 No. 60079.0 : 2015 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS |
NFPA 79 : 2015 | ELECTRICAL STANDARD FOR INDUSTRIAL MACHINERY |
IEEE 1106-2015 REDLINE | IEEE Recommended Practice for Installation, Maintenance, Testing, and Replacement of Vented Nickel-Cadmium Batteries for Stationary Applications |
IEEE 1657-2009 | IEEE Recommended Practice for Personnel Qualifications for Installation and Maintenance of Stationary Batteries |
ISO 31000:2009 | Risk management Principles and guidelines |
IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
ISEA 125 : 2014 | CONFORMITY ASSESSMENT OF SAFETY AND PERSONAL PROTECTIVE EQUIPMENT |
NFPA 70B : 2016 | RECOMMENDED PRACTICE FOR ELECTRICAL EQUIPMENT MAINTENANCE |
CFR 21(PTS800-1299) : 0 | FOOD AND DRUGS - FOOD AND DRUG ADMINISTRATION, CHAPTER 1 DEPARTMENT OF HEALTH AND HUMAN SERVICES - PARTS 800-1299 |
OHSAS 18001:2007 | Occupational health and safety management systems. Requirements |
IEC 60079-10-1:2015 | Explosive atmospheres - Part 10-1: Classification of areas - Explosive gas atmospheres |
CFR 29(PTS1920-END) : 1986 | LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR |
IEC 61243-3:2014 | Live working - Voltage detectors - Part 3: Two-pole low-voltage type |
IEC 60079-20-1:2010 | Explosive atmospheres - Part 20-1: Material characteristics for gas and vapour classification - Test methods and data |
IEC 61243-2:1995+AMD1:1999+AMD2:2002 CSV | Live working - Voltage detectors - Part 2: Resistive type to be used for voltages of 1 kV to 36 kV a.c. |
IEEE 1635-2012 | IEEE/ASHRAE Guide for the Ventilation and Thermal Management of Batteries for Stationary Applications |
CSA C22.2 No. 60079.1 : 2016 | EXPLOSIVE ATMOSPHERES - PART 1: EQUIPMENT PROTECTION BY FLAMEPROOF ENCLOSURES 'D' |
IEEE 3007.3-2012 | IEEE Recommended Practice for Electrical Safety in Industrial and Commercial Power Systems |
IEEE 463-2013 REDLINE | IEEE Standard for Electrical Safety Practices in Electrolytic Cell Line Working Zones |
IEC TR 60079-16:1990 | Electrical apparatus for explosive gas atmospheres. Part 16: Artificial ventilation for the protection of analyser(s) houses |
ULC 61479:1ED 2005-12 | Live working - Flexible Conductor Covers (Line Hoses) of Insulating Material |
IEC 61243-1:2003+AMD1:2009 CSV | Live working - Voltage detectors - Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c. |
ANSI Z136.1 : 2014 | SAFE USE OF LASERS |
IEEE 4-2013 | IEEE Standard for High-Voltage Testing Techniques |
CSA Z460 : 2013 | CONTROL OF HAZARDOUS ENERGY - LOCKOUT AND OTHER METHODS |
ANSI A14.5 : 2007 | PORTABLE REINFORCED PLASTIC - SAFETY REQUIREMENTS |
IEEE 1654:2009 | RF PROTECTION OF PERSONNEL WORKING IN THE VICINITY OF WIRELESS COMMUNICATIONS ANTENNAS ATTACHED TO ELECTRIC POWER LINE STRUCTURES |
IEEE 80-2013 REDLINE | IEEE Guide for Safety in AC Substation Grounding |
ANSI C84.1 : 2016 | ELECTRIC POWER SYSTEMS AND EQUIPMENT - VOLTAGE RATINGS (60 HERTZ) |
IEEE C2-2017 | NATIONAL ELECTRICAL SAFETY CODE (NESC)(R) |
NFPA 70E : 2018 | ELECTRICAL SAFETY IN THE WORKPLACE |
NFPA 70 : 2017 | NATIONAL ELECTRICAL CODE |
ISO 14001:2015 | Environmental management systems — Requirements with guidance for use |
ASTM F 1506 : 2017-11 | PERFORMANCE SPECIFICATION FOR FLAME RESISTANT AND ELECTRIC ARC RATED PROTECTIVE CLOTHING WORN BY WORKERS EXPOSED TO FLAMES AND ELECTRIC ARCS |
CSA Z195:14 (R2019) | Protective footwear |
IEC 60079-14:2013 | Explosive atmospheres - Part 14: Electrical installations design, selection and erection |
ISO 9001:2015 | Quality management systems — Requirements |
ANSI Z358.1 : 2014 | EMERGENCY EYEWASH AND SHOWER EQUIPMENT |
CSA Z321 : 0 | SIGNS AND SYMBOLS FOR THE WORKPLACE |
IEEE C37.20.7-2007 REDLINE | IEEE Guide for Testing Metal-Enclosed Switchgear Rated Up to 38 kV for Internal Arcing Faults |
IEEE 450-2010 REDLINE | IEEE Recommended Practice for Maintenance, Testing, and Replacement of Vented Lead-Acid Batteries for Stationary Applications |
ASTM F 887 : 2017-02 | SPECIFICATIONS FOR PERSONAL CLIMBING EQUIPMENT |
CSA Z1000 : 2014 | OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT |
CSA Z94.1 : 2015 | INDUSTRIAL PROTECTIVE HEADWEAR - PERFORMANCE, SELECTION, CARE, AND USE |
NFPA 77 : 2014 | STATIC ELECTRICITY |
IEEE 1584-2002 | IEEE Guide for Performing Arc Flash Hazard Calculations |
CFR 29(PT1926) : 0 | LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR - SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION |
IEEE 946-2004 | IEEE Recommended Practice for the Design of DC Auxiliary Power Systems for Generating Systems |
CSA E60079.7 : 2003 | ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 7: INCREASED SAFETY "E" |
CSA Z1006 : 2016 | MANAGEMENT OF WORK IN CONFINED SPACES |
ANSI A14.4 : 2009 | SAFETY REQUIREMENTS FOR JOB MADE WOODEN LADDERS |
IEEE 937-2007 REDLINE | IEEE Recommended Practice for Installation and Maintenance of Lead-Acid Batteries for Photovoltaic (PV) Systems |
CSA C22.2 No. 144.1 : 2016 | GROUND-FAULT CIRCUIT-INTERRUPTERS |
IEEE 1491-2012 REDLINE | IEEE Guide for Selection and Use of Battery Monitoring Equipment in Stationary Applications |
ANSI A14.3 : 2008(R2018) | FIXED - SAFETY REQUIREMENTS |
IEC 60079-13:2017 | Explosive atmospheres - Part 13: Equipment protection by pressurized room "p" and artificially ventilated room "v" |
ASTM F 1959/F1959M : 2014-05 | TEST METHOD FOR DETERMINING THE ARC RATING OF MATERIALS FOR CLOTHING |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.