DEFSTAN 00-035(PT3)/5(2017) : 2017
Current
Current
The latest, up-to-date edition.
ENVIRONMENTAL HANDBOOK FOR DEFENCE MATERIEL - PART 3: ENVIRONMENTAL TEST METHODS
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
01-28-2017
Publisher
SECTION 1 - GENERAL
SECTION 2 - MECHANICAL
SECTION 3 - CLIMATIC
SECTION 4 - CHEMICAL AND BIOLOGICAL
Describes test methods, which together with the associated assessments provide the basis for the verification of the ability of materiel to withstand the effects of specific environments.
| DevelopmentNote |
Supersedes DEFSTAN 00-35(PT3)/4(2006). (05/2017)
|
| DocumentType |
Standard
|
| Pages |
676
|
| PublisherName |
UK Ministry of Defence Standards
|
| Status |
Current
|
| DEFSTAN 02-121(PT1)/4(2017) : 2017 | REQUIREMENTS FOR GALLEYS AND ASSOCIATED SPACES (CATEGORY 2) - PART 1: COMMON REQUIREMENTS |
| DEFSTAN 61-021 SUPP49/4(2021):2021 | General Specification for Batteries<br>Supplement: 049 : Lithium Thionyl Chloride Battery 14V 160AH (Nominal) NSN 6135-99-617-2805<br> |
| DEFSTAN 81-041(PT2)/9(2017) : 2017 | PACKAGING OF DEFENCE MATERIEL - PART 2: DESIGN |
| BS 3G 100-2.3.14:1973 | Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions Acoustic vibration |
| DEFSTAN 81-41(PT3)/6(2014) : 2014 | PACKAGING OF DEFENCE MATERIEL - PART 3: ENVIRONMENTAL TESTING |
| STANAG 4297 : 0 | GUIDANCE ON THE ASSESSMENT OF THE SAFETY AND SUITABILITY FOR SERVICE OF MUNITIONS FOR NATO ARMED FORCES - AOP-15 |
| BS EN ISO 18081:2016 | Non-destructive testing. Acoustic emission testing (AT). Leak detection by means of acoustic emission |
| DEFSTAN 00-35(PT4)/4(2006) : 2006 | ENVIRONMENTAL HANDBOOK FOR DEFENCE MATERIEL - PART 4: NATURAL ENVIRONMENTS |
| BS EN ISO 3452-1:2013 | Non-destructive testing. Penetrant testing General principles |
| STANAG 2805 : 0 | |
| BS EN ISO 17640:2010 | Non-destructive testing of welds. Ultrasonic testing. Techniques, testing levels, and assessment |
| BS EN ISO 9934-1:2016 | Non-destructive testing. Magnetic particle testing General principles |
| BS EN ISO 12707:2016 | Non-destructive testing. Magnetic particle testing. Vocabulary |
| BS ISO 1817:2015 | Rubber, vulcanized or thermoplastic. Determination of the effect of liquids |
| DEFSTAN 07-85(PT2)/3(2006) : 2006 | DESIGN REQUIREMENTS FOR WEAPONS AND ASSOCIATED SYSTEMS - PART 2: SUPPLEMENTARY AND DESIGN PROCESS REQUIREMENTS |
| DEFSTAN 02-729(PT2)/3(2013) : 2013 | REQUIREMENTS FOR NON-DESTRUCTIVE EXAMINATION METHODS - PART 2: MAGNETIC PARTICLE |
| BS 1595(1965) : LATEST | PROPAN-2-OL (ISOPROPYL ALCOHOL) FOR INDUSTRIAL USE |
| BS EN 22876:1993 | Complete, filled transport packages. Method for determination of resistance to damage by rolling |
| BS EN ISO 17636-1:2013 | Non-destructive testing of welds. Radiographic testing X- and gamma-ray techniques with film |
| ISO 2876:1985 | Packaging — Complete, filled transport packages — Rolling test |
| BS EN 16018:2011 | Non-destructive testing. Terminology. Terms used in ultrasonic testing with phased arrays |
| AECTP-400 : 2006 | MECHANICAL ENVIRONMENTAL TESTS |
| ASTM G 183 : 2015 : REDLINE | Standard Practice for Field Use of Pyranometers, Pyrheliometers and UV Radiometers |
| ISO 9060:1990 | Solar energy Specification and classification of instruments for measuring hemispherical solar and direct solar radiation |
| BS 3G 100-2.3.6:1972 | Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions Acceleration requirements |
| DEFSTAN 00-35(PT5)/4(2006) : 2006 | ENVIRONMENTAL HANDBOOK FOR DEFENCE MATERIEL - PART 5: INDUCED MECHANICAL ENVIRONMENTS |
| DEFSTAN 42-24/1(1976) : 1976 AMD 3 | FOAM LIQUID, FIRE EXTINGUISHING (FLUOROCHEMICAL TYPE) |
| STANAG 4280 : 2014 | NATO PACKAGING AND PRESERVATION |
| BS EN 22248:1993 | Complete, filled transport packages. Method for determination of resistance to vertical impact by dropping |
| BS EN 12668-2:2010 | Non-destructive testing. Characterization and verification of ultrasonic examination equipment Probes |
| MIL-STD-810 Revision G:2008 | ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS |
| BS ISO 18431-4:2007 | Mechanical vibration and shock. Signal processing Shock-response spectrum analysis |
| NES 1004 : ISSUE 2 AMD 1 | REQUIREMENTS FOR DESIGN AND TESTING OF EQUIPMENTS TO MEET ENVIRONMENTAL CONDITIONS |
| BS 2737:1956 | Terminology of internal defects in castings as revealed by radiography |
| BS EN 12668-1:2010 | Non-destructive testing. Characterization and verification of ultrasonic examination equipment Instruments |
| BS EN ISO 2244:2002 | Packaging. Complete, filled transport packages and unit loads. Horizontal impact tests |
| DEFSTAN 00-35(PT1)/4(2006) : 2006 | ENVIRONMENTAL HANDBOOK FOR DEFENCE MATERIEL - PART 1: CONTROL AND MANAGEMENT |
| DEFSTAN 00-088/3(2017) : 2017 | PACKAGING FOR AMMUNITION AND EXPLOSIVES |
| BS EN ISO 12048:2001 | Packaging. Complete, filled transport packages. Compression and stacking tests using a compression tester |
| DEFSTAN 00-003/6(2017) : 2017 | DESIGN GUIDANCE FOR THE TRANSPORTABILITY OF EQUIPMENT |
| BS EN 1330-4:2010 | Non-destructive testing. Terminology Terms used in ultrasonic testing |
| BS EN 1330-1:2014 | Non destructive testing. Terminology List of general terms |
| BS 3G 100-2.3.3:1972 | Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions Mould growth |
| DEFSTAN 02-729(PT4)/3(2013) : 2013 | REQUIREMENTS FOR NON-DESTRUCTIVE EXAMINATION METHODS - PART 4: LIQUID PENETRANT |
| BS EN ISO 2400:2012 | Non-destructive testing. Ultrasonic testing. Specification for calibration block No. 1 |
| BS EN ISO 4180:2010 | Packaging. Complete, filled transport packages. General rules for the compilation of performance test schedules |
| DEFSTAN 08-123/2(2012) : 2012 | REQUIREMENTS FOR DESIGN AND TESTING OF EQUIPMENTS TO MEET ENVIRONMENTAL CONDITIONS |
| MIL-HDBK-781 Revision A:1996 | RELIABILITY TEST METHODS, PLANS, AND ENVIRONMENTS FOR ENGINEERING DEVELOPMENT, QUALIFICATION AND PRODUCTION |
| ISO 5878:1982 | Reference atmospheres for aerospace use |
| BS EN 12668-3:2013 | Non-destructive testing. Characterization and verification of ultrasonic examination equipment Combined equipment |
| BS EN ISO 12718:2008 | Non-destructive testing. Eddy current testing. Vocabulary |
| BS EN 13185:2001 | Non-destructive testing. Leak testing. Tracer gas method |
| BS EN ISO 846:1997 | Plastics. Evaluation of the action of microorganisms |
| BS EN ISO 4892-3:2016 | Plastics. Methods of exposure to laboratory light sources Fluorescent UV lamps |
| PD 6461-4:2004 | General metrology Practical guide to measurement uncertainty |
| DEFSTAN 00-35(PT2)/4(2006) : 2006 | ENVIRONMENTAL HANDBOOK FOR DEFENCE MATERIEL - PART 2: ENVIRONMENTAL TRIALS PROGRAMME DERIVATION AND ASSESSMENT METHODOLOGIES |
| BS 3G 100-2.3.4:1972 | Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions Differential pressure requirements |
| BS EN ISO 17636-2:2013 | Non-destructive testing of welds. Radiographic testing X- and gamma-ray techniques with digital detectors |
| BS EN ISO 12706:2009 | Non-destructive testing. Penetrant testing. Vocabulary |
| BS EN 15433-1:2007 | Transportation loads. Measurement and evaluation of dynamic mechanical loads General requirements |
| BS EN 1330-3:1997 | Non-destructive testing. Terminology Terms used in industrial radiographic testing |
| BS ISO 6072:2011 | Rubber. Compatibility between hydraulic fluids and standard elastomeric materials |
| DEFSTAN 02-729(PT1)/3(2013) : 2013 | REQUIREMENTS FOR NON-DESTRUCTIVE EXAMINATION METHODS - PART 1: RADIOGRAPHIC |
| BS EN ISO 16811:2014 | Non-destructive testing. Ultrasonic testing. Sensitivity and range setting |
| BS ISO 12103-1:2016 | Road vehicles. Test contaminants for filter evaluation Arizona test dust |
| ISO/TR 9901:1990 | Solar energy Field pyranometers Recommended practice for use |
| ISO/IEC Guide 99:2007 | International vocabulary of metrology Basic and general concepts and associated terms (VIM) |
| BS 3G 100-2.3.9:1972 | Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions Ice formation |
| BS EN 12195-1:2010 | Load restraining on road vehicles. Safety Calculation of securing forces |
| ISO 9847:1992 | Solar energy — Calibration of field pyranometers by comparison to a reference pyranometer |
| BS EN ISO 3059:2012 | Non-destructive testing. Penetrant testing and magnetic particle testing. Viewing conditions |
| DEFSTAN 00-35(PT3)/4(2006) : 2006 | ENVIRONMENTAL HANDBOOK FOR DEFENCE MATERIEL - PART 3: ENVIRONMENTAL TEST METHODS |
| BS EN ISO 2234:2002 | Packaging. Complete, filled transport packages and unit loads. Stacking tests using a static load |
| BS EN 1518:1998 | Non-destructive testing. Leak testing. Characterization of mass spectrometer leak detectors |
| DEFSTAN 02-729(PT5)/3(2013) : 2013 | REQUIREMENTS FOR NON-DESTRUCTIVE EXAMINATION METHODS - PART 5: ULTRASONIC |
| BS EN ISO 4892-1:2016 | Plastics. Methods of exposure to laboratory light sources General guidance |
| BS EN ISO 9712:2012 | Non-destructive testing. Qualification and certification of NDT personnel |
| ISO 8002:1986 | Mechanical vibrations — Land vehicles — Method for reporting measured data |
| STANAG 4370 : 2016 | ENVIRONMENTAL TESTING |
| BS EN 1330-8:1998 | Non-destructive testing. Terminology Terms used in leak tightness testing |
| STANAG 4375 : 2010 | SAFETY DROP, MUNITION TEST PROCEDURE |
| BS EN 13625:2002 | Non-destructive testing. Leak test. Guide to the selection of instrumentation for the measurement of gas leakage |
| BS EN 1991-1-4 : 2005 | EUROCODE 1: ACTIONS ON STRUCTURES - PART 1-4: GENERAL ACTIONS - WIND ACTIONS |
| BS EN ISO 4892-2:2013 | Plastics. Methods of exposure to laboratory light sources Xenon-arc lamps |
| BS ISO 20653:2013 | Road vehicles. Degrees of protection (IP code). Protection of electrical equipment against foreign objects, water and access |
| DEFSTAN 61-21/3(2009) : 2009 | GENERAL SPECIFICATION FOR BATTERIES |
| BS EN ISO 2233:2001 | Packaging. Complete, filled transport packages and unit loads. Conditioning for testing |
| DEFSTAN 08-4(PT3)/3(2010) : 2010 | NUCLEAR WEAPONS EXPLOSIONS EFFECTS AND HARDENING - PART 3: NUCLEAR WEAPONS EXPLOSIONS: SIMULATION OF ENVIRONMENTS |
| BS 7621:1993 | Method for calibrating field pyranometers by comparison to a reference pyranometer |
| DEFSTAN 00-56/1(1991) : 1991 | HAZARD ANALYSIS AND SAFETY CLASSIFICATION OF THE COMPUTER AND PROGRAMMABLE ELECTRONIC SYSTEM ELEMENTS OF DEFENCE EQUIPMENT |
| BS 2G 135:1967 | Specification for electrically-heated pitot and pitotstatic pressure heads |
| BS EN 1330-2:1998 | Non-destructive testing. Terminology Terms common to the non-destructive testing methods |
| AECTP-300 : 2006 | CLIMATIC ENVIRONMENTAL TESTS |
| BS EN 13184:2001 | Non-destructive testing. Leak testing. Pressure change method |
| BS EN 1779:1999 | Non-destructive testing. Leak testing. Criteria for method and technique selection |
| PD ISO/TR 7620:2005 | Rubber materials. Chemical resistance |
| ISO 2248:1985 | Packaging Complete, filled transport packages Vertical impact test by dropping |
| DEFSTAN 00-970/1(1983) : 1983 | DESIGN REQUIREMENTS FOR SERVICE AIRCRAFT |
| DEFSTAN 91-113/2(2007) : 2007 | LUBRICATING OIL, ENGINE: SEVERE DUTY DIESEL, EXTENDED SERVICE - SAE 10W/30 NATO CODE: O-1176 JOINT SERVICE DESIGNATION: OMD-90 |
| DEFSTAN 08-120/2(2014) : 2014 | REQUIREMENTS FOR DETERMINING THE SHOCK STRENGTH OF EQUIPMENT |
| BS EN 1593:1999 | Non-destructive testing. Leak testing. Bubble emission techniques |
| DEFSTAN 91-48/2(1997) : 1997 | HYDRAULIC FLUID, PETROLEUM: SUPERCLEAN NATO CODE: H-515 JOINT SERVICE DESIGNATION: OM-15 HYDRAULIC FLUID, PETROLEUM: NORMAL NATO CODE: H-520 JOINT SERVICE DESIGNATION: OM-18 |
| BS EN 13192:2002 | Non-destructive testing. Leak testing. Calibration of reference leaks for gases |
| DEFSTAN 02-729(PT3)/3(2013) : 2013 | REQUIREMENTS FOR NON-DESTRUCTIVE EXAMINATION METHODS - PART 3: EDDY CURRENT |
| BS 2011(1967) : LATEST | |
| STANAG 4340 : 2015 | NATO STANDARD PACKAGING TEST PROCEDURES |
| DEFSTAN 81-041(PT1)/9(2016) : 2016 | PACKAGING OF DEFENCE MATERIEL - PART 1: INTRODUCTION TO DEFENCE PACKAGING REQUIREMENTS |
| ASTM D 471 : 2016-02 | TEST METHOD FOR RUBBER PROPERTY - EFFECT OF LIQUIDS |
| BS EN 12195-2:2001 | Load restraint assemblies on road vehicles. Safety Web lashing made from man-made fibres |
| AECTP-230 : 2009 | CLIMATIC CONDITIONS |
| BS EN ISO 175:2010 | Plastics. Methods of test for the determination of the effects of immersion in liquid chemicals |
| AEPP-3 : 2015 | NATO STANDARD PACKAGING TEST PROCEDURES |
| BS 6794:1986 | Method for reporting measured vibration data for land vehicles |
| BS EN ISO 2064:2000 | Metallic and other inorganic coatings. Definitions and conventions concerning the measurement of thickness |
| BS EN ISO 13355:2003 | Packaging. Complete, filled transport packages and unit loads. Vertical random vibration test |
Free
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.