DIN 15400:1990-06
Current
The latest, up-to-date edition.
Hardcopy , PDF
German, English
01-01-1990
1 Anwendungsbereich
2 Mechanische Eigenschaften
3 Werkstoffe
4 Tragfähigkeiten
5 Vorhandene Spannungen in Lasthaken nach DIN 15401
Teil 1 und Teil 2 und DIN 15 402 Teil 1 und Teil 2
5.1 Randspannungen im Hauptbiegequerschnitt A-B
5.2 Zugspannung im kleinsten Schaftquerschnitt I-K
5.3 Scherspannung im ersten Gewindegang
Zitierte Normen und andere Unterlagen
Weitere Normen und andere Unterlagen
Frühere Ausgaben
Änderungen
Erläuterungen
This Standard is included in DIN Handbook 185. Makes specifications for the following types of hook for use on lifting appliances: forged point hooks as in DIN 15401 Part 1 or 2, forged ramshorn hooks as in DIN 15402 Part 1 or 2, and laminated hooks as in DIN 15407 Part 1 or 2. It may be applied by analogy to the components of lifting appliances that are subject to similar stresses, but does not cover cast hooks (cf. Explanatory notes).
| DocumentType |
Standard
|
| Pages |
9
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Current
|
| DIN 15411:1983-08 | LIFTING APPLIANCES - HOOK ASSEMBLIES FOR BOTTOM HOOK BLOCKS |
| DIN HDBK 185 : 2ED 1995 | MATERIALS HANDLING 2. STANDARDS FOR CRANES AND OTHER LIFTING APPLIANCES (2) FROM DIN 15049 |
| DIN 15401-2:1983-09 | LIFTING HOOKS FOR LIFTING APPLIANCES - SINGLE HOOKS - FINISHED PARTS WITH THREADED SHANK |
| DD CEN/TS 13001-3-5:2010 | Cranes. General design Limit states and proof of competence of forged hooks |
| DIN 15428:1978-08 | LIFTING APPLIANCES; LOAD SUSPENDING DEVICES, TECHNICAL SPECIFICATIONS |
| 97/713936 DC : DRAFT AUG 1997 | PREN 13000 - CRANES - SAFETY - MOBILE CRANES |
| 09/30187535 DC : 0 | BS EN 13000 - CRANES - MOBILE CRANES |
| S.R. CEN TS 13001-3-5:2010 | CRANES - GENERAL DESIGN - PART 3-5: LIMIT STATES AND PROOF OF COMPETENCE OF FORGED HOOKS |
| I.S. EN 13000:2010 | Cranes - Mobile cranes |
| 16/30341165 DC : 0 | BS EN 14492-2 - CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| BS EN 13000 : 2010 | CRANES - MOBILE CRANES |
| ISO 17440:2014 | Cranes General design Limit states and proof of competence of forged steel hooks |
| 13/30285283 DC : 0 | BS EN 13001-3-5 - CRANES - GENERAL DESIGN - PART 3-5: LIMIT STATE AND PROOF OF COMPETENCE OF FORGED HOOKS |
| DIN 15410:1982-07 | SERIAL LIFTING APPLIANCES; ARRANGEMENT OF BOTTOM HOOK BLOCKS FOR ELECTRIC HOISTS WITH ONE AND TWO SHEAVES FOR WIRE ROPES |
| I.S. EN 12999:2011 | CRANES - LOADER CRANES |
| DIN EN 12999:2013-02 | CRANES - LOADER CRANES |
| EN 12999:2011+A2:2018 | Cranes - Loader cranes |
| I.S. EN 14492-2:2006 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| DIN EN 13000:2014-11 | CRANES - MOBILE CRANES |
| DIN EN 13157:2010-07 | Cranes - Safety - Hand powered cranes (includes Amendment A1:2009) |
| DIN 15030:1977-11 | LIFTING EQUIPMENT; ACCEPTANCE TESTING OF CRANE INSTALLATIONS; PRINCIPLES |
| VDI 4449:2009-04 | Guidance on the modification of crane systems |
| PREN 12999 : DRAFT 2007 | CRANES - LOADER CRANES |
| DIN 15421-1:1982-07 | CRANES; BOTTOM BLOCKS; TYPE B ROPE PULLEYS WITH DEEP GROOVE BALL BEARING AND INTERNAL SLEEVE |
| BS EN 12999 : 2011 | CRANES - LOADER CRANES |
| EN 13001-3-5:2016 | Cranes - General design - Part 3-5: Limit states and proof of competence of forged hooks |
| EN 13000:2010+A1:2014 | Cranes - Mobile cranes |
| DIN 15401-1:1982-11 | LIFTING HOOKS; SHANK HOOKS WITH A POINT; FORGINGS |
| UNI EN 13157 : 2009 | CRANES - SAFETY - HAND POWERED CRANES |
| UNI EN 13000 : 2014 | CRANES - MOBILE CRANES |
| UNI EN 14492-2 : 2009 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| DIN 15404-1:1989-12 | LIFTING HOOKS, TECHNICAL CONDITIONS FOR FORGED HOOKS |
| BS ISO 17440:2014 | Cranes. General design. Limit states and proof of competence of forged steel hooks |
| UNE-EN 12999:2011 | Cranes - Loader cranes |
| UNE-EN 13000:2010 | Cranes - Mobile cranes |
| EN 14492-2:2006+A1:2009/AC:2010 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| PREN 13000 : DRAFT 2009 | CRANES - MOBILE CRANES |
| 00/707658 DC : DRAFT APR 2000 | PREN 13852-2 - CRANES - EQUIPMENT - PART 2: NON-ELECTROTECHNICAL EQUIPMENT |
| PREN 14492-2 : DRAFT 2016 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| DIN 15404-2:1988-11 | LIFTING HOOKS - TECHNICAL CONDITIONS FOR LAMINATED HOOKS |
| BS EN 13001-3-5:2016 | Cranes. General design Limit states and proof of competence of forged hooks |
| 07/30164729 DC : 0 | BS EN 12999 - CRANES - LOADER CRANES |
| DIN EN 14492-2:2016-08 (Draft) | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| BS EN 14492-2 : 2006 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| CEN/TS 13001-3-5:2010 | Cranes - General design - Part 3-5: Limit states and proof of competence of forged hooks |
| DIN 15407-1:1977-09 | LIFTING HOOKS; LAMINATED HOOKS WITH A POINT FOR SPIGOT LADLES, ASSEMBLY, PRINCIPAL DIMENSIONS |
| DIN 15428:1978-08 | LIFTING APPLIANCES; LOAD SUSPENDING DEVICES, TECHNICAL SPECIFICATIONS |
| DIN 15404-1:1989-12 | LIFTING HOOKS, TECHNICAL CONDITIONS FOR FORGED HOOKS |
| DIN 17102:1983-10 | WELDABLE NORMALIZED FINE GRAIN STRUCTURAL STEELS - TECHNICAL DELIVERY CONDITIONS FOR PLATE, STRIP, WIDE FLATS, SECTIONS AND BARS |
| DIN 15401-1:1982-11 | LIFTING HOOKS; SHANK HOOKS WITH A POINT; FORGINGS |
| DIN 17280:1985-07 | STEELS WITH LOW TEMPERATURE TOUGHNESS - TECHNICAL DELIVERY CONDITIONS FOR PLATE, SHEET, STRIP, WIDE FLATS, SECTIONS, BARS AND FORGINGS |
| DIN 15402-2:1983-09 | LIFTING HOOKS FOR LIFTING APPLIANCES - RAMSHORN HOOKS - FINISHED PARTS WITH THREADED SHANK |
| DIN 15407-2:1989-08 | LAMINATED POINT HOOKS FOR SPIGOT LADLES - COMPONENTS |
| DIN 15401-2:1983-09 | LIFTING HOOKS FOR LIFTING APPLIANCES - SINGLE HOOKS - FINISHED PARTS WITH THREADED SHANK |
| DIN 17200:1987-03 | STEELS FOR QUENCHING AND TEMPERING - TECHNICAL DELIVERY CONDITIONS |
| DIN 15429:1978-07 | LIFTING APPLIANCES; LOAD SUSPENDING DEVICES, INSPECTION IN SERVICE |
| DIN 15402-1:1982-11 | LIFTING HOOKS FOR LIFTING APPLIANCES; RAMSHORN HOOKS; UNMACHINED PARTS |
| DIN 15404-2:1988-11 | LIFTING HOOKS - TECHNICAL CONDITIONS FOR LAMINATED HOOKS |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.