DIN 16945:1989-03
Current
The latest, up-to-date edition.
REACTION RESINS - REACTANTS AND REACTION MOULDING MATERIALS - TEST METHODS
Hardcopy , PDF
English, German
01-01-1989
1 Anwendungsbereich und Zweck
2 Begriffe
2.1 Reaktionsharze
2.2 Reaktionsmittel
2.3 Reaktionsharzmassen
3 Probenahme
4 Prüfung von Reaktionsharzen
4.1 Dichte
4.2 Brechzahl
4.3 Farbzahl
4.4 Viskosität im Anlieferzustand
4.5 Viskosität nach Warmlagerung (sowie
Viskositätsaufbau)
4.6 Schmelzintervall
4.7 Flammpunkt
4.8 Masseverlust
4.9 Asche
4.10 Füllstoffe und Verunreinigungen
4.11 Trockenrückstand und Einbrennrückstand
4.12 Säurezahl
4.13 Verseifungszahl
4.14 Gehalt an flüchtigen Anteilen (Styrol und
andere Monomere)
4.15 Epoxid-Äquivalent
4.16 Hydroxylzahl
4.17 Gehalt an Methacrylat
4.18 Gehalt an Isocyanat
4.19 Organisch gebundenes Chlor und Brom
4.20 Äquivalente UP- bzw. PHA-Doppelbindungen
je 100 g Substanz
5 Prüfung von Reaktionsmitteln (Härter, Beschleuniger
und andere)
5.1 Dichte
5.2 Brechzahl
5.3 Viskosität im Anlieferzustand
5.4 Schmelzintervall
5.5 Flammpunkt
5.6 Aminzahl
5.7 Hydroxylzahl
5.8 Wassergehalt
5.9 Säureanhydridgehalt
5.10 Gehalt an Aktivsauerstoff
6 Prüfung von Reaktionsharzmassen
6.1 Isothermer Viskositätsverlauf
6.2 Temperaturanstieg
6.3 Gelierzeit
6.4 Verhalten beim Härten
6.5 Ermittlung der Gesamt-Volumenschwindung
durch Dichtebestimmung
7 Prüfbericht
Zitierte Normen und andere Unterlagen
Frühere Ausgaben
Änderungen
Erläuterungen
This standard is included in DIN Handbook 117 and 73.
| DocumentType |
Standard
|
| Pages |
16
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Current
|
| DIN HDBK 73 : 14ED 2016 | ESTRICHARBEITEN, GUSSASPHALTARBEITEN VOB/STLB-BAU - VOB TEIL C: ATV DIN 18299, ATV DIN 18353, ATV DIN 18354 |
| DIN 65090:1979-07 | AEROSPACE; TEXTILE GLASS, PREIMPREGNATED FILAMENT GLASS CLOTH FROM E-GLASS (PREPREG), TECHNICAL SPECIFICATIONS |
| DIN VDE 0291-2 : 1979 | COMPOUNDS FOR USE IN CABLE ACCESSORIES; CASTING RESINOUS COMPOUNDS BEFORE CURE AND IN THE CURED STATE |
| DIN 57291-2 : 1979 | COMPOUNDS FOR USE IN CABLE ACCESSORIES; CASTING RESINOUS COMPOUNDS BEFORE CURE AND IN THE CURED STATE |
| DIN 16966-7:1995-04 | PIPE JOINTS AND THEIR ELEMENTS OF GLASS FIBRE REINFORCED POLYESTER RESINS - PART 7: BUSHINGS, FLANGES, FLANGED AND BUTT JOINTS - GENERAL QUALITY REQUIREMENTS AND TEST METHODS |
| BS EN ISO 12215-1:2000 | Small craft. Hull construction and scantlings Materials. Thermosetting resins, glass-fibre reinforcement, reference laminate |
| PREN 16245-2 : DRAFT 2011 | FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 2: ADDITIONAL REQUIREMENTS FOR RESINS, CURING SYSTEMS, ADDITIVES AND MODIFIERS |
| UNE-EN 16245-2:2014 | Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 2: Specific requirements for resin, curing systems, additives and modifiers |
| 11/30239977 DC : 0 | BS EN 16245-2 - FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 2: ADDITIONAL REQUIREMENTS FOR RESINS, CURING SYSTEMS, ADDITIVES AND MODIFIERS |
| DIN EN 16245-2:2013-08 | Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 2: Specific requirements for resin, curing systems, additives and modifiers |
| DIN 65065:1979-08 | AEROSPACE; RESINS FOR FIBER REINFORCED, TECHNICAL SPECIFICATION |
| DIN 16946-1:1989-03 | Cured casting resins; testing |
| DIN HDBK 117 : 8ED 2017 | ROHSTOFFE FUER BESCHICHTUNGSSTOFFE 1 - BINDEMITTEL, LOESEMITTEL UND WEICHMACHER - DIN-NORMEN |
| VDI/VDE 2251 Blatt 8:2007-09 | Precision engineering components - Adhesive connections |
| DIN 51290-1 E : 1991 | TESTING OF POLYMER CONCRETES (REACTION RESIN CONCRETES) FOR MECHANICAL ENGINEERING PURPOSES; TERMINOLOGY |
| DIN 65383:1997-10 | AEROSPACE - THERMOSETTING EPOXY WOVEN GLASS FILAMENT FABRIC PREIMPREGNATED FOR STRUCTURAL APPLICATIONS - TECHNICAL SPECIFICATION |
| I.S. EN 16245-2:2013 | FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 2: SPECIFIC REQUIREMENTS FOR RESIN, CURING SYSTEMS, ADDITIVES AND MODIFIERS |
| ISO 12215-1:2000 | Small craft — Hull construction and scantlings — Part 1: Materials: Thermosetting resins, glass-fibre reinforcement, reference laminate |
| EN 16245-2:2013 | Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 2: Specific requirements for resin, curing systems, additives and modifiers |
| DIN 16966-1:1988-11 | PIPE JOINTS AND THEIR ELEMENTS OF GLASS FIBRE REINFORCED RESINS - FITTINGS - GENERAL QUALITY REQUIREMENTS AND TEST METHODS |
| DIN 55928-9:1991-05 | PROTECTION OF STEEL STRUCTURES FROM CORROSION BY ORGANIC AND METALLIC COATINGS - COATING MATERIALS - COMPOSITION OF BINDERS AND PIGMENTS |
| DIN 16946-2:1989-03 | Cured casting resins; types |
| VDE 0291-2 : 1979 | COMPOUNDS FOR USE IN CABLE ACCESSORIES - CASTING RESINOUS COMPOUNDS BEFORE CURE AND IN THE CURED STATE |
| BS EN 16245-2:2013 | Fibre-reinforced plastic composites. Declaration of raw material characteristics Specific requirements for resin, curing systems, additives and modifiers |
| UNI EN 16245-2 : 2013 | FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 2: SPECIFIC REQUIREMENTS FOR RESIN, CURING SYSTEMS, ADDITIVES AND MODIFIERS |
| DIN HDBK KUNSTSTOFFE BAND 4 : 2015 | HANDBUCH KUNSTSTOFFE - BAND 4 - DUROPLASTISCHE KUNSTSTOFF-FORMMASSEN UND VERSTAERKTE KUNSTSTOFFE |
| NF EN ISO 12215-1 : 2001 | SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 1: MATERIALS: THERMOSETTING RESINS, GLASS-FIBRE REINFORCEMENT, REFERENCE LAMINATE |
| DIN 18820-1:1991-03 | LAMINATES OF TEXTILE GLASS-REINFORCED UNSATURATED POLYESTER AND PHENACRYLIC RESINS FOR LOAD-BEARING STRUCTURAL MEMBERS (GF-UP, GF-PHA) - STRUCTURE, MANUFACTURE AND CHARACTERISTICS |
| DIN 16994:1987-05 (Draft) | CELLULAR MATERIALS - FLEXIBLE POLYURETHANE FOAMS, BLOCKFOAMED BASED ON POLYETHER FOR LOAD-BEARING APPLICATIONS - REQUIREMENTS, TESTING |
| DIN 28054-1:2000-09 | CHEMICAL APPARATUS - COATING WITH ORGANIC MATERIALS FOR METALLIC COMPONENTS - PART 1: REQUIREMENTS AND TESTING |
| EN ISO 12215-1:2000 | Small craft - Hull construction and scantlings - Part 1: Materials: Thermosetting resins, glass-fibre reinforcement, reference laminate (ISO 12215-1:2000) |
| DIN 51290-1:1991-05 | TESTING OF POLYMER CONCRETES (REACTION RESIN CONCRETES) FOR MECHANICAL ENGINEERING PURPOSES; TERMINOLOGY |
| ONORM C 2370 : 2008 | PAINTS AND VARNISHES FOR CORROSION PROTECTION - COMPONENTS RELEVANT FOR CORROSION PROTECTION |
| DIN 53214:1982-02 | TESTING OF PAINTS AND VARNISHES; DETERMINATION OF RHEOGRAMS AND VISCOSITIES BY ROTATIONAL VISCOMETERS |
| DIN 51423-2:2010-02 | Testing of mineral oils - Part 2: Measurement of the relative refractive index with the Abbe-refractometer |
| ISO 2535:2001 | Plastics Unsaturated-polyester resins Measurement of gel time at ambient temperature |
| DIN 53401:1988-06 | DETERMINATION OF SAPONIFICATION VALUE |
| DIN 12904:1975-02 | Porcelain laboratory ware; crucibles and lids |
| DIN 12336:1970-03 | FLAT BOTTOM EVAPORATING BASINS |
| DIN 12605:2013-03 | LABORATORY GLASSWARE - WEIGHING VESSELS |
| DIN 51777-1:1983-03 | TESTING OF MINERAL OIL HYDROCARBONS AND SOLVENTS - DETERMINATION OF WATER CONTENT ACCORDING TO KARL FISCHER - DIRECT METHOD |
| DIN 53188:1975-10 | PAINTS, VARNISHES AND SIMILAR PRODUCTS; EPOXIDE RESINS, METHODS OF TEST |
| ISO 3001:1999 | Plastics Epoxy compounds Determination of epoxy equivalent |
| ISO 75:1987 | Plastics and ebonite Determination of temperature of deflection under load |
| DIN 7728-1:1988-01 | PLASTICS - SYMBOLS AND CODES FOR POLYMERS AND THEIR SPECIAL CHARACTERISTICS |
| DIN 12602:1977-05 | LABORATORY GLASSWARE; SOXHLET EXTRACTORS WITH STANDARD GROUND JOINTS |
| DIN 53185:1997-05 | PAINTS, VARNISHES AND SIMILAR PRODUCTS; ISOCYANATE RESINS, METHODS OF TEST |
| DIN 53015:2001-02 | VISCOMETRY - MEASUREMENT OF VISCOSITY BY MEANS OF THE ROLLING BALL VISCOMETER BY HOPPLER |
| DIN ISO 2592:1981-09 | PETROLEUM PRODUCTS - DETERMINATION OF FLASH AND FIRE POINTS, CLEVELAND OPEN CUP METHOD |
| DIN 53181:1991-08 | BINDERS FOR PAINTS, VARNISHES AND SIMILAR COATING MATERIALS - DETERMINATION OF THE MELTING INTERVAL OF RESINS BY THE CAPILLARY METHOD |
| DIN 53461:1987-01 | TESTING OF PLASTICS; DETERMINATION OF HEAT DEFLECTION TEMPERATURE UNDER LOAD |
| DIN 43712:1987-12 | MEASUREMENT AND CONTROL - ELECTRICAL TEMPERATURE SENSORS - WIRES FOR THERMOCOUPLES |
| DIN 6162:1981-12 | DETERMINATION OF IODINE COLOUR NUMBER |
| DIN 53019-1:2008-09 | VISCOMETRY - MEASUREMENT OF VISCOSITIES AND FLOW CURVES BY MEANS OF ROTATIONAL VISCOMETERS - PART 1: PRINCIPLES AND MEASURING GEOMETRY |
| DIN 53240:1971-12 | DETERMINATION OF HYDROXYL VALUE |
| DIN 12449:1977-09 | Paper laboratory ware; extraction thimbles |
| DIN 4188-1:1977-10 | SCREENING SURFACES, WIRE SCREENS FOR TEST SIEVES, DIMENSIONS |
| DIN 50014:1985-07 | CLIMATES AND THEIR TECHNICAL APPLICATION; STANDARD ATMOSPHERES |
| DIN V 53242-1:1986-12 | RAW MATERIALS FOR PAINTS AND VARNISHES; SAMPLING; TERMS AND DEFINITIONS, GENERAL RULES |
| ISO 584:1982 | Plastics — Unsaturated polyester resins — Determination of reactivity at 80 degrees C (conventional method) |
| DIN 16946-1:1989-03 | Cured casting resins; testing |
| DIN 53213-1:1978-04 | TESTING OF PAINTS, VARNISHES AND SIMILAR PRODUCTS CONTAINING SOLVENTS - FLASHPOINT TEST USING CLOSED CUP, DETERMINATION OF FLASHPOINT |
| DIN 53184:1999-07 | BINDERS FOR PAINTS AND VARNISHES; UNSATURATED POLYESTER RESINS; METHODS OF TEST |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.