DIN 50049:1992-04
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
METALLIC PRODUCTS; TYPES OF INSPECTION DOCUMENTS
Available format(s)
Hardcopy , PDF
Superseded date
08-01-1995
Language(s)
English
Published date
01-12-2013
1 Allgemeines
1.1 Zweck und Anwendungsbereich
1.2 Normative Verweisungen
1.3 Definitionen
2 Bescheinigungen über Prüfungen, die von Personal
durchgeführt werden, das vom Hersteller beauftragt
ist und der Fertigungsabteilung angehören kann
2.1 Werksbescheinigung "2.1"
2.2 Werkszeugnis "2.2"
2.3 Werksprüfzeugnis "2.3"
3 Bescheinigungen über Prüfungen, die von dazu
beauftragtem Personal durchgeführt oder beaufsichtigt
wurden, das von der Fertigungsabteilung unabhängig ist
auf der Grundlage spezifischer Prüfung
3.1 Abnahmeprüfzeugnis
3.2 Abnahmeprüfprotokoll
4 Ausstellung von Bescheinigungen durch einen Verarbeiter
oder einen Händler
5 Bestätigung der Prüfbescheinigungen
6 Zusammenstellung der Prüfbescheinigungen
Tabelle
Anhang A Benennung der Prüfbescheinigungen nach
EN 10204 in den einzelnen Sprachen
Describes certificates which give results of materials testing, in particular tests on manufacturing workpieces materials and components. THERE HAS BEEN NO CHANGE IN TECHNICAL CONTENT BETWEEN THE 1991 AND 1992 EDITIONS, THE ONLY CHANGE IS THAT IT NOW STATES ON THE TITLE PAGE THAT IT IS IDENTICAL TO EN 10204. AVAILABLE IN ENGLISH OR GERMAN.
| DocumentType |
Standard
|
| Pages |
6
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| EN 10204:2004 | Corresponds |
| EURONORM 21 : 1978 | Similar to |
| ISO 404:2013 | Identical |
| ISO 10474:2013 | Corresponds |
| BWB TL 4210-0094 : 2ED 1994 | PROPORTIONER, DRY, WITH D-COUPLING (NBC) |
| DIN 65035:1993-11 | AEROSPACE; STEEL, NICKEL- AND COBALT-ALLOY STOCK, FORGINGS AND RINGS; TECHNICAL SPECIFICATION |
| DIN 14923:1989-06 | SAFETY BELT FOR FIREMEN - MEASURES, REQUIREMENTS, TESTS |
| DIN 1057-3:1985-07 | BUILDING MATERIALS FOR FREE-STANDING CHIMNEYS - ACID-RESISTANT WATERGLASS CEMENTS - REQUIREMENTS, TESTING, INSPECTION |
| DIN 19565-1:1989-03 | PIPES AN FITTINGS OF GLASS FIBRE REINFORCED PLASTICS (UP-GF) FOR BURIED SEWERS AND DRAINS - CENTRIFUGAL CASTED, FILLED - DIMENSIONS, TECHNICAL TERMS OF DELIVERY |
| DIN 7540:1980-10 | EYE HOOKS, GRADE 5 |
| DIN 28058-1:1987-11 | LEAD USED IN APPARATUS ENGINEERING - HOMOGENEOUS LEAD LINING |
| DIN 17162-2:1980-09 | FLAT STEEL PRODUCTS - HOT-DIP ZINC-COATED STRIP AND SHEET - TECHNICAL CONDITIONS OF DELIVERY - STRUCTURAL STEELS FOR GENERAL USE |
| BWB TL 6810-0024 : 2ED 1985 | SODA WATER GLASS (SODIUM SILICATE SOLUTION) |
| BWB TL 6810-0076 : 2ED 1980 | SODIUM HYDROSULFATE, INDUSTRIAL |
| DIN 29657:1991-01 | AEROSPACE - SEAMLESS STRUCTURAL TUBES IN STEEL AND NICKEL ALLOYS - TECHNICAL SPECIFICATION |
| DIN 2395-2:1994-09 | RECTANGULAR AND SQUARE WELDED PRECISION STEEL TUBES - PART 2: TECHNICAL TERMS OF DELIVERY FOR GENERAL USE |
| BWB TL 6850-0037 : 2ED 1984 | DECONTAMINATION AGENT (ETHYLENEDIAMINETETRAACETIC ACID DISODIUM SALT, ETHYLENEDINITRILOTETRAACETIC ACID DISODIUM SALT, NA2 EDTA) |
| DIN 65374:1989-11 | AEROSPACE; POLYTETRAFLUOROETHYLENE (PTFE) SEMI-FINISHED PRODUCTS AND MOULDED PARTS; TECHNICAL SPECIFICATION |
| DIN 6616:1989-09 | HORIZONTAL STEEL TANKS, SINGLE- AND DOUBLE-WALLED, FOR THE ABOVE-GROUND STORAGE OF WATER-POLLUTING, INFLAMMABLE AND NON-INFLAMMABLE LIQUIDS |
| DIN 3015-10:1994-02 | FASTENING CLAMPS - BLOCK CLAMPS - TECHNICAL DELIVERY CONDITIONS |
| DIN 8513-1:1979-10 | BRAZING AND BRAZE WELD FILLER METALS; COPPER BASE BRAZING ALLOYS; COMPOSITION, USE, TECHNICAL CONDITIONS OF DELIVERY |
| BWB TL 6810-0009 : 1ED 1982 | CHROME TRIOXIDE, INDUSTRIAL (CHROME(6)-OXIDE; CHROMIC ACID ANHYDRIDE) |
| BWB TL 7930-0015 : 1ED 1979 | AIRCRAFT WAX (LIQUID) |
| DIN 1142:1982-01 | WIRE ROPE GRIPS FOR ROPE TERMINATIONS TO MEET SAFETY REQUIREMENTS |
| DIN 8566-2:1984-12 | FILLER METALS FOR THERMAL SPRAYING; SOLID WIRES FOR ARC SPRAYING; TECHNICAL DELIVERY CONDITIONS |
| DIN 46400-4:1987-01 | STEEL FLAT PRODUCTS WITH SPECIAL MAGNETIC PROPERTIES; MAGNETIC SHEET AND STRIP OF ALLOYED STEELS, COLD ROLLED, NONORIENTED, DELIVERED IN THE SEMI-PROCESSED STATE; TECHNICAL DELIVERY CONDITIONS |
| BWB TL 6810-0075 : 2ED 1980 | SODIUM CARBONATE, INDUSTRIAL (SODA) |
| DIN 29971:1991-09 | AEROSPACE - UNIDIRECTIONAL CARBON FIBRE-EPOXY SHEET AND TAPE PREPREG - TECHNICAL SPECIFICATION |
| DIN 65427-2:1991-09 | AEROSPACE; AROMATIC POLYAMIDE (ARAMID); FABRIC WOVEN FROM HIGH-MODULUS FILAMENT YARN; TECHNICAL SPECIFICATION |
| DIN 6618-1:1989-09 | VERTICAL STEEL TANKS, SINGLE-WALLED FOR THE ABOVE-GROUND STORAGE OF WATER-POLLUTING, INFLAMMABLE AND NON-INFLAMMABLE LIQUIDS |
| DIN 17470:1984-10 | HEATING CONDUCTOR ALLOYS - TECHNICAL DELIVERY CONDITIONS FOR ROUND AND FLAT WIRE |
| DIN 15428:1978-08 | LIFTING APPLIANCES; LOAD SUSPENDING DEVICES, TECHNICAL SPECIFICATIONS |
| DIN 65266:1980-01 | AEROSPACE; FABRIC COVERING, TECHNICAL SPECIFICATION |
| BWB TL 8105-0016 : 4ED 1984 | MATTRESS BAG MADE OF POLYETHYLENE FOIL FOR FOAM MATTRESS 200 CM X 75 CM X 5 CM |
| DIN 17441:1997-02 | STAINLESS STEELS - TECHNICAL DELIVERY CONDITIONS FOR COLD ROLLED STRIPS AND SLIT COILS STRIP AND SHEETS CUT FROM SUCH STRIPS FOR PRESSURE PURPOSES |
| DIN 65060:1991-07 | AEROSPACE; TEXTILE GLASS, TEXTILE GLASS FILAMENT ROVINGS FOR REINFORCEMENT OF PLASTICS; TECHNICAL SPECIFICATION |
| DIN 32979:1992-06 | HOISTS FOR TRANSFER OF PERSONS; SAFETY REQUIREMENTS, TESTING |
| DIN 8573-1:1983-01 | FILLER METALS FOR WELDING UNALLOYED AND LOW ALLOY CAST IRON MATERIALS; DESIGNATION; TECHNICAL DELIVERY CONDITIONS |
| DIN 55928-8:1994-07 | PROTECTION OF STEEL STRUCTURES FROM CORROSION BY ORGANIC AND METALLIC COATINGS - PART 8: PROTECTION OF SUPPORTING THIN-WALLED BUILDING COMPONENTS FROM CORROSION |
| BWB TL 6810-0004 : 4ED 1985 | METHYLETHYLKETONE, INDUSTRIAL (2-BUTANONE, MEK) |
| BWB TL 7930-0016 : 2ED 1986 | GLASS CLEANING AGENT GLASREINIGER (WINDOW CLEANING AGENT) |
| BWB TL 6850-0036 : 2ED 1984 | DECONTAMINATION AGENT (ALCYLARYLSULFONATE) |
| DIN 16966-1:1988-11 | PIPE JOINTS AND THEIR ELEMENTS OF GLASS FIBRE REINFORCED RESINS - FITTINGS - GENERAL QUALITY REQUIREMENTS AND TEST METHODS |
| DIN 3387-2:1991-12 | TUBE CONNECTIONS FOR METALLIC TUBES HAVING FLANGED ENDS FOR GAS PIPES |
| DIN 28126:1989-04 | DN 125 BOW CLOSURES FOR PROCESS EQUIPMENT |
| BS 7191:1989 | Specification for weldable structural steels for fixed offshore structures |
| DIN 2078:1990-05 | STEEL WIRE FOR WIRE ROPES |
| DIN 65038-1:1989-08 | AEROSPACE; STEEL, NICKEL- AND COBALT-ALLOYS BARS; TECHNICAL SPECIFICATION |
| DIN 65146-2:1991-09 | AEROSPACE; PREIMPREGNATED WOVEN FABRIC OF CARBON FILAMENT YARN AND EPOXY RESIN; TECHNICAL SPECIFICATION |
| DIN 17655:1981-11 | UNALLOYED AND LOW ALLOY, COPPER MATERIALS FOR CASTINGS - CASTINGS |
| DIN 2528:1991-06 | STEEL FLANGES - TECHNICAL DELIVERY CONDITIONS |
| DIN 40501-1:1985-06 | ALUMINIUM FOR ELECTRICAL PURPOSES; E-Al PLATE, SHEET AND STRIP; TECHNICAL DELIVERY CONDITIONS |
| DIN 18807-1 : 1987 AMD 1 2001 | TRAPEZOIDAL SHEETING IN BUILDING - TRAPEZOIDAL STEEL SHEETING - GENERAL REQUIREMENTS AND DETERMINATION OF LOADBEARING CAPACITY BY CALCULATION |
| DIN 3859-3:1995-12 | NON-SOLDERING COMPRESSION COUPLINGS WITH CUTTING RINGS ACCORDING TO DIN 2353 - PART 3: TEST PROCEDURE |
| DIN 65360:1992-02 | AEROSPACE; ROLLER CHAINS; TECHNICAL SPECIFICATION |
| DIN 4922-2:1981-04 | STEEL FILTER PIPES FOR DRILLED WELLS WITH SCREWED CONNECTION DN 100 TO DN 500 |
| DIN 61853-1:1987-04 | TEXTILE GLASS; TEXTILE GLASS MATS FOR PLASTICS REINFORCEMENT; TECHNICAL DELIVERY CONDITIONS |
| DIN 40500-5:1983-06 | COPPER FOR ELECTRICAL PURPOSES; TINNED WIRE; TECHNICAL DELIVERY CONDITIONS |
| DIN 1628:1984-10 | HIGH PERFORMANCE WELDED CIRCULAR UNALLOYED STEEL TUBES - TECHNICAL DELIVERY CONDITIONS |
| DIN 1732-1:1988-06 | FILLER METALS FOR WELDING ALUMINIUM & ALUMINIUM ALLOYS; COMPOSITION, APPLICATION & TECHNICAL DELIVERY CONDITIONS |
| BWB TL 4210-0119 : 3ED 1995 | FIRE FIGHTING CART, POWDER, PG 50, FIRE CLASSIFICATION A, B, C |
| DIN 65221:1989-11 | AEROSPACE; SHEETS FROM RUBBER-CORK; TECHNICAL SPECIFICATION |
| BWB TL 7195-0050 : 1ED 1977 | SHELTER FURNITURE ITEMS - GENERAL CONDITIONS |
| DIN 3442-1:1987-05 | VALVES OF POLYPROPYLEN (PP) - REQUIREMENTS AND TESTS |
| BWB TL 3990-0031 : 8ED 1995 | CRATE PALLET, NAVY, STEEL, 1 T |
| DIN 60850-2:1987-03 | TEXTILE GLASS; GLASS FILAMENT YARNS; TECHNICAL DELIVERY CONDITIONS |
| BWB TL 8345-0003 : 5ED 1977 | MOTOR VEHICLE PENNANT |
| BWB TL 6810-0080 : 3ED 1985 | HYDROCHLORIC ACID, INDUSTRIAL |
| BWB TL 4230-0026 : 1ED 1995 | RACK FOR CONTAMINATED CLOTHING |
| DIN 1615:1984-10 | WELDED CIRCULAR UNALLOYED STEEL TUBES NOT SUBJECT TO SPECIAL REQUIREMENTS - TECHNICAL DELIVERY CONDITIONS |
| BWB TL 6810-0017 : 2ED 1980 | TRISODIUM PHOSPHATE, INDUSTRIAL |
| BWB TL 5995-0017 : 2ED 1980 | TELECOMMUNICATION CABLE, 2-PAIR, 120 M |
| BWB TL 6810-0026 : 1ED 1982 | ACETIC ACID N-BUTYL ESTER, INDUSTRIAL (N-BUTYL ACETATE) |
| DIN 65147-2:1987-04 | AEROSPACE; CARBON FIBRES; FABRIC OF CARBON FIBRE FILAMENT YARN; TECHNICAL SPECIFICATION |
| DIN 1716:1981-11 | COPPER LEAD TIN ALLOYS CASTING (HIGH LEADED BRONZES) |
| DIN 29547:1990-10 | Aerospace; seamless structural tubes in wrought aluminium alloys; technical specification; inactive for new design |
| BWB TL 8030-0019 : 2ED 1985 | LEATHER OIL |
| DIN 73411:1979-07 | HOSES FOR COOLING PIPES IN MOTOR VEHICLES; REQUIREMENTS, DIMENSIONS, TESTS |
| BWB TL 6810-0020 : 3ED 1986 | 1-BUTANOL, INDUSTRIAL (N-BUTANOL, N-BUTYL ALCOHOL) |
| DIN 65065:1979-08 | AEROSPACE; RESINS FOR FIBER REINFORCED, TECHNICAL SPECIFICATION |
| DIN 1057-2:1985-07 | BUILDING MATERIALS FOR FREE-STANDING CHIMNEYS - LINING BLOCKS - REQUIREMENTS, TESTING, INSPECTION |
| BWB TL 6675-0026 : 3ED 1994 | RANGING POLE, DEMOUNTABLE, IN CONTAINER |
| DIN 1624:1987-06 | FLAT PRODUCTS OF STEEL - COLD ROLLED NARROW STRIP IN WIDTHS < 650 MM OF MILD UNALLOYED STEELS - TECHNICAL DELIVERY CONDITIONS |
| BWB TL 6810-0067 : 4ED 1985 | AMMONIUMHYDROXIDE, INDUSTRIAL (AMMONIA WATER) |
| BWB TL 6230-0050 : 3ED 1989 | FLASHLIGHT, EXPLOSION-PROOF, 24 V, 25 W |
| BWB TL 6230-0064 : 1ED 1976 | SPECIAL PURPOSE LIGHTS, FLUORESCENT |
| BWB TL 6675-0033 : 3ED 1994 | CHART BOARD, FOLDABLE |
| BWB TL 4510-0008 : 1ED 1995 | SHOWER STALL |
| BWB TL 3990-0049 : 5ED 1995 | PALLET FOR TIRE STORAGE 1400 MM X 1400 MM |
| DIN 43763:1986-03 | MEASUREMENT AND CONTROL - ELECTRICAL TEMPERATURE SENSORS - METAL PROTECTING TUBES FOR THERMOMETERS WITH INSERTED SENSOR UNITS |
| DIN 61854-1:1987-04 | TEXTILE GLASS - WOVEN GLASS FABRICS FOR PLASTICS REINFORCEMENT - WOVEN GLASS FILAMENT FABRIC AND WOVEN ROVING - TECHNICAL DELIVERY CONDITIONS |
| DIN 1785:1983-10 | WROUGHT COPPER AND COPPER ALLOY TUBES FOR CONDENSERS AND HEAT EXCHANGERS |
| DIN 17480:1992-05 | VALVE MATERIALS - TECHNICAL DELIVERY CONDITIONS |
| DIN 1691:1985-05 | FLAKE GRAPHITE CAST IRON (GREY CAST IRON) - PROPERTIES |
| DIN 29972:1988-01 | AEROSPACE - RIGID CELLULAR MATERIALS - SHEET - TECHNICAL SPECIFICATION |
| BWB TL 7240-0028 : 1ED 1979 | CANISTER, 5 L, STEEL |
| DIN 8513-2:1979-10 | BRAZING AND BRAZE WELD FILLER METALS - SILVER-BEARING BRAZING ALLOYS WITH LESS THAN 20 % BY WT. SILVER - COMPOSITION, USE, TECHNICAL CONDITIONS OF DELIVERY |
| DIN 1630:1984-10 | HIGH PERFORMANCE SEAMLESS CIRCULAR UNALLOYED STEEL TUBES - TECHNICAL DELIVERY CONDITIONS |
| DIN 1714:1981-11 | COPPER-ALUMINIUM CASTING ALLOYS (CAST ALUMINIUM BRONZE) - CASTINGS |
| DIN 16966-7:1995-04 | PIPE JOINTS AND THEIR ELEMENTS OF GLASS FIBRE REINFORCED POLYESTER RESINS - PART 7: BUSHINGS, FLANGES, FLANGED AND BUTT JOINTS - GENERAL QUALITY REQUIREMENTS AND TEST METHODS |
| DIN 1733-1:1988-06 | WELDING FILLER METALS FOR COPPER AND COPPER ALLOYS - COMPOSITION, APPLICATION AND TECHNICAL DELIVERY CONDITIONS |
| DIN 65572:1992-11 | AEROSPACE; UNIDIRECTIONAL SHEET AND TAPE PREPREG FROM CARBON FIBRES AND NON-REACTIVE THERMOPLASTICS; TECHNICAL SPECIFICATION |
| BWB TL 6650-0026 : 2ED 1994 | VISION BLOCK FOR ARMOURED ENGINEER TANK 2 |
| DIN 16890:1980-05 | PIPES OF ACRYLNITRILE-BUTADIENE-STYRENE (ABS) OR ACRYLNITRILE-STYRENE-ACRYLESTER (ASA) - GENERAL QUALITY REQUIREMENTS - TESTING |
| DIN 17172:1978-05 | STEEL PIPES FOR LONG DISTANCE PIPELINES FOR COMBUSTIBLE LIQUIDS AND GASES - TECHNICAL CONDITIONS OF DELIVERY |
| DIN 17230:1980-09 | BALL AND ROLLER BEARING STEELS - TECHNICAL CONDITIONS OF DELIVERY |
| DIN 17122:1978-03 | STEEL CONDUCTOR CONTACT RAILS FOR ELECTRIC TRACTION; TECHNICAL CONDITIONS OF DELIVERY |
| DIN 17145:1980-05 | ROUND WIRE ROD FOR WELDING FILLER METALS - TECHNICAL CONDITIONS OF DELIVERY |
| DIN 17111:1980-09 | LOW CARBON UNALLOYED STEELS FOR BOLTS, NUTS AND RIVETS - TECHNICAL CONDITIONS OF DELIVERY |
| DIN 17177:1979-05 | ELECTRIC PRESSURE-WELDED STEEL TUBES FOR ELEVATED TEMPERATURES - TECHNICAL CONDITIONS OF DELIVERY |
| DIN 65587:1992-12 | AEROSPACE; WEBBING; TECHNICAL SPECIFICATION |
| DIN 8513-3:1986-07 | FILLER METALS FOR BRAZING - SILVER-BASE BRAZING ALLOYS CONTAINING NOT LESS THAN 20 % SILVER BY MASS, COMPOSITION, USE, TECHNICAL DELIVERY CONDITIONS |
| VDE 0210 : 1985 | PLANNING AND DESIGN OF OVERHEAD POWER LINES WITH RATED VOLTAGES ABOVE 1 KV |
| DIN 17010:1985-06 | GENERAL TECHNICAL DELIVERY CONDITIONS FOR STEEL AND STEEL PRODUCTS |
| BWB TL 6810-0029 : 1ED 1983 | CALCIUM CHLORIDE HYPOCHLORITE, INDUSTRIAL (CHLORIDE OF LIME) |
| DIN 17350:1980-10 | TOOL STEELS - TECHNICAL CONDITIONS OF DELIVERY |
| DIN 40500-3:1980-04 | COPPER FOR ELECTRICAL PURPOSES; SECTIONS, RODS, BARS, TECHNICAL TERMS OF DELIVERY |
| BWB TL 3835-0022 : 1ED 1977 | SWIVELING BASE PLATE AND CLAMPS |
| BWB TL 8415-0146 : 3ED 1988 | PONCHO, HEAT PROTECTION, NAVY |
| BWB TL 6675-0034 : 3ED 1994 | MOBILIZATION CHART BOX, WOOD |
| BWB TL 4210-0013 : 3ED 1995 | CARBON DIOXIDE FIRE FIGHTING CART, 30 KG, FIRE CLASSIFICATION B |
| DIN 18516-4:1990-02 | CLADDING FOR EXTERNAL WALLS, VENTILATED AT REAR; TEMPERED SAFETY GLASS; REQUIREMENTS, DESIGN, TESTING |
| BWB TL 5180-0232 : 2ED 1977 | TOOL KIT, ON-BOARD ELECTRICIAN, NAVY, KIT 2 |
| BWB TL 6810-0003 : 4ED 1985 | ACETONE, INDUSTRIAL (2-PROPANONE, DIMETHYLKETONE) |
| BWB TL 7105-0114 : 3ED 1995 | COLLAPSIBLE BENCH, LIGHT-METAL/PLASTIC |
| BWB TL 3990-0055 : 4ED 1992 | HOOK-IN GRILL, FLAT PALLETS, KIT |
| DIN 29783:1983-04 | AEROSPACE - PRECISION CASTINGS OF TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION |
| BWB TL 6810-0079 : 3ED 1983 | |
| BWB TL 7320-0056 : 1ED 1988 | SHELF TROLLEY, 1 AND 2 SECTIONS, OPEN AND CLOSED |
| DIN 1052-2 : 1988 AMD 1 1996 | STRUCTURAL USE OF TIMBER - MECHANICALY FASTENED JOINTS |
| DIN 29965:1992-11 | AEROSPACE - CARBON FIBRES - CARBON FIBRE FILAMENT YARNS - TECHNICAL SPECIFICATION |
| BWB TL 6810-0072 : 3ED 1985 | SODIUM HYPOCHLORITE SOLUTION (CAUSTIC SODA SOLUTION) |
| BWB TL 6810-0069 : 3ED 1985 | AMMONIUM CHLORIDE, INDUSTRIAL |
| BWB TL 8030-0003 : 3ED 1981 | HOT-DIP MATERIALS FOR STRIPPABLE COMPOUNDS FOR THE PROTECTION OF METAL SURFACES |
| DIN 65063:1978-09 | AEROSPACE; SOFT FOAM, SHEETS OF ASBESTOS (CHRYSOTIL), TECHNICAL SPECIFICATION |
| DIN 5290-1:1983-04 | SNAP HOOK FROM LIGHT METAL; WITH SETTING NUT; DIMENSIONS, REQUIREMENTS AND TESTING |
| DIN 7872:1990-11 | WATER SPORTS EQUIPMENT; INFLATABLE BATHING BOATS WITH SAIL AND/OR MOTOR; SAFETY REQUIREMENTS AND TESTING |
| BWB TL 8010-0017 : 3ED 1989 | COATING SYSTEMS FOR BUNDESWEHR EQUIPMENT MADE OF HOT-GALVANIZED STEEL - INDUSTRIAL |
| BWB TL 6850-0028 : 1ED 1981 | DESICCANT WITH HUMIDITY INDICATOR (BLUE GEL) |
| DIN 1052-1 : 1988 AMD 1 1996 | STRUCTURAL USE OF TIMBER - DESIGN AND CONSTRUCTION |
| DIN 2828:1994-02 | CAM LOCKING COUPLINGS FOR HOSE ASSEMBLIES - NOMINAL PRESSURE 10 |
| DIN 65034:1992-06 | Aerospace; castings of steel, nickel- and cobalt alloys; technical specification; inactive for new design |
| DIN 4554:1986-12 | OFFICE FURNITURE (EXCLUDING CHAIRS); REQUIREMENTS AND TESTS |
| DIN 61360-2:1986-03 | SYNTHETIC FIBRE LIFTING SLINGS - SAFETY REQUIREMENTS AND TESTING |
| DIN 46400-3:1989-04 | STEEL FLAT PRODUCTS WITH SPECIAL MAGNETIC PROPERTIES; MAGNETIC SHEET AND STRIP, GRAIN ORIENTED; TECHNICAL DELIVERY CONDITIONS |
| DIN 65453:1993-02 | AEROSPACE; PREIMPREGNATED UNIDIRECTIONAL SHEET OF CARBON FIBRES AND BISMALEINIMIDE- OR POLYMIDE RESIN; TECHNICAL SPECIFICATION |
| DIN 17405:1979-09 | SOFT MAGNETIC MATERIALS FOR DIRECT CURRENT RELAYS; TECHNICAL CONDITIONS OF DELIVERY |
| DIN 4807-3:1993-10 | EXPANSION VESSELS, ELASTOMER MEMBRANES; REQUIREMENTS AND TESTING |
| DIN 40501-3:1985-06 | ALUMINIUM FOR ELECTRICAL PURPOSES; E-AL AND E-ALMgSiO.5 BARS AND SECTION; TECHNICAL DELIVERY CONDITIONS |
| DIN 28125 Beiblatt 1:1989-04 | Hinged covers; example for construction of a lifting aid |
| DIN 4922-2 E : 1981 | STEEL FILTER PIPES FOR DRILLED WELLS WITH SCREWED CONNECTION DN 100 TO DN 500 |
| DIN 1651:1988-04 | FREE-CUTTING STEELS - TECHNICAL DELIVERY CONDITIONS |
| DIN 28600:1983-01 | DUCTILE IRON PRESSURE PIPES AND FITTINGS FOR GAS AND WATER PIPELINES - TECHNICAL DELIVERY CONDITIONS |
| DIN 65498:1991-10 | AEROSPACE; POLYETHERIMIDE (PEI) SEMI-FINISHED PRODUCTS AND MOULDED PARTS; TECHNICAL SPECIFICATION |
| DIN 65113:1990-10 | Aerospace; bars and extruded profiles of aluminium and wrought aluminium alloys; technical specification; inactive for new design |
| BWB TL 6810-0021 : 4ED 1986 | XYLENE, INDUSTRIAL |
| DIN 17865:1990-11 | TITANIUM AND TITANIUM ALLOY CASTINGS - INVESTMENT CASTINGS, RAMMED GRAPHITE CASTINGS |
| DIN 1626:1984-10 | WELDED CIRCULAR UNALLOYED STEEL TUBES SUBJECT TO SPECIAL REQUIREMENTS - TECHNICAL DELIVERY CONDITIONS |
| BWB TL 6810-0028 : 1ED 1982 | DICHLOROMETHANE, INDUSTRIAL (METHYLENE CHLORIDE) |
| DIN 2950:1983-04 | MALLEABLE CAST IRON FITTINGS |
| DIN 30674-1:1982-09 | COATING OF DUCTILE CAST IRON PIPES - POLYETHYLENE COATING |
| DIN 29531:1990-09 | Aerospace; castings of aluminium and magnesium alloys; technical specification |
| DIN 4922-1 E : 1978 | STEEL FILTER PIPES FOR DRILLED WELLS AND SLOT PERFORATION AND FISCHING (BUTT STRAP JOINT) |
| DIN 58946-2:1982-10 | STERILIZATION - STEAM STERILIZERS - BIG STERILIZERS - REQUIREMENTS |
| BWB TL 3990-0048 : 5ED 1995 | PALLET FOR TIRE STORAGE 1040 MM X 1040 MM |
| BWB TL 4820-0007 : 1ED 1977 | AIR AND GAS SHUTOFF DEVICE |
| BWB TL 6920-0103 : 1ED 1995 | TRAINING EQUIPMENT, MORTAR FIRING, SET |
| DIN 65067-1:1980-12 | AEROSPACE; SANDWICH STRUCTURES WITH TOP LAYERS OF FIBRE REINFORCED PLASTICS, TECHNICAL SPECIFICATION |
| DIN 29546:1990-10 | Aerospace; wrought aluminium alloys sheet, plate and strip; technical specification; inactive for new design |
| DIN 2609:1991-02 | STEEL BUTT-WELDING PIPE FITTINGS - TECHNICAL DELIVERY CONDITIONS |
| DIN 15404-1:1989-12 | LIFTING HOOKS, TECHNICAL CONDITIONS FOR FORGED HOOKS |
| DIN 65590:1992-12 | AEROSPACE; BRAIDED CORD; TECHNICAL SPECIFICATION |
| BWB TL 6810-0064 : 4ED 1985 | TREATED WATER, AQUA PURIFICATA (DISTILLED/DEMINERALIZED WATER) |
| DIN 65237:1996-09 | Aerospace - Spherical plain bearings, steel on steel - Technical specification; inactive for new design |
| BWB TL 7930-0014 : 4ED 1987 | SOFT SOAP |
| BWB TL 6230-0086 : 1ED 1992 | HEAD-MOUNTED WORKING LIGHT, EXPLOSION-PROOF, CHARGEABLE, 230 V AC |
| BWB TL 4510-0005 : 2ED 1995 | SHOWER PIPE WITH D COUPLINGS AND 3 CONNECTIONS FOR HAND SHOWER |
| BWB TL 6810-0019 : 4ED 1986 | GLYCEROLUM (GLYCEROLUM; GLYCERIN, ANHYDROUS) |
| DIN 29543:1990-10 | Aerospace; seamless internal pressure tubes in wrought aluminium alloys; technical specification; inactive for new design |
| BWB TL 3940-0007 : 2ED 1988 | CARGO SLING, RIGGER, 3 T, 5 T AND 10 T |
| BWB TL 8110-0041 : 3ED 1981 | PRESS-IN LID CANS 0.5 L AND 1 L (NOT FOR FOOD PRODUCTS) |
| DIN 4133:1991-11 | STEEL STACKS |
| DIN 8076-3:1994-08 | PRESSURE PIPELINES MADE FROM THERMOPLASTICS MATERIALS - PLASTIC JOINTS FOR PE PIPES; GENERAL QUALITY REQUIREMENTS, TESTING |
| BWB TL 6810-0068 : 3ED 1985 | SULFURIC ACID, INDUSTRIAL |
| DIN VDE 0210 : 1985 | PLANNING AND DESIGN OF OVERHEAD POWER LINES WITH RATED VOLTAGES ABOVE 1 KV |
| DIN 15404-2:1988-11 | LIFTING HOOKS - TECHNICAL CONDITIONS FOR LAMINATED HOOKS |
| DIN 12925-2:1988-05 | LABORATORY FURNITURE - CUPBOARDS FOR PRESSURE CYLINDERS - SAFETY REQUIREMENTS, TESTING |
| DIN 17140-1:1983-03 | WIRE ROD FOR COLD DRAWING - TECHNICAL DELIVERY CONDITIONS FOR BASIC STEEL AND UNALLOYED QUALITY STEELS |
| DIN VDE 0750-211 : 1988 | MEDICAL ELECTRICAL EQUIPMENT - MEDICAL SUPPLY UNITS - PARTICULAR REQUIREMENTS FOR SAFETY |
| DIN 65186:1990-10 | Aerospace; wrought aluminium alloy sheet and strip shaped profiles (sections); technical specification; inactive for new design |
| DIN 46400-2:1987-01 | STEEL FLAT PRODUCTS WITH SPECIAL MAGNETIC PROPERTIES; MAGNETIC SHEET & STRIP OF UNALLOYED STEELS, COLD ROLLED, NONORIENTED, DELIVERED IN SEMI-PROCESSED STATE; TECHNICAL DELIVERY CONDITIONS |
| DIN 8905-1:1983-10 | TUBES FOR REFRIGERATING SYSTEMS WITH HERMETIC AND SEMI-HERMETIC COMPRESSORS - OUTSIDE DIAMETER UP TO 54 MM - TECHNICAL DELIVERY CONDITIONS |
| DIN 4702-1:1990-03 | BOILERS FOR CENTRAL HEATING, TERMS, REQUIREMENTS, TESTING, MARKING |
| DIN 65021:1986-11 | AEROSPACE; SHEET, PLATE AND STRIP OF STEEL, NICKEL ALLOYS AND COBALT ALLOYS; TECHNICAL SPECIFICATION |
| DIN 1629:1984-10 | SEAMLESS CIRCULAR UNALLOYED STEEL TUBES SUBJECT TO SPECIAL REQUIREMENTS - TECHNICAL DELIVERY CONDITIONS |
| DIN 17182:1992-05 | GENERAL-PURPOSE STEEL CASTINGS WITH ENHANCED WELDABILITY AND HIGHER TOUGHNESS - TECHNICAL DELIVERY CONDITIONS |
| DIN 13150-1:1991-06 | MEDICAL SYRINGES - REQUIREMENTS ON THE MEASURING SECURITY OF SYRINGS WITH SCALE - CONFORMITY TESTING AND CONFORMITY CERTIFICATION |
| DIN 50949:1984-02 | TESTING OF INORGANIC NON-METALLIC COATINGS AN PURE ALUMINIUM AND ALUMINIUM ALLOYS - NON-DESTRUCTIVE TESTING OF ANODICALLY COATED ALUMINIUM BY MEASURING THE ADMITTANCE |
| BWB TL 5110-0023 : 3ED 1994 | POCKET KNIFE |
| DIN 29544:1990-10 | Aerospace; seamless duct tubing of aluminium and wrought aluminium alloys; technical specification; inactive for new design |
| BWB TL 7930-0011 : 1ED 1984 | FIELD COOKSTOVE CLEANSER (LIQUID) |
| DIN 60060-1:1991-10 | WEBBING LOAD RESTRAINT ASSEMBLIES MADE FROM SYNTHETIC FIBRES FOR USE ON COMMERCIAL VEHICLES |
| DIN 1652-1:1990-11 | BRIGHT STEEL - GENERAL TECHNICAL DELIVERY CONDITIONS |
| DIN 14940:1990-04 | FIREMEN'S HELMET - REQUIREMENTS, TESTING |
| DIN 13098-1:1992-05 | SINGLE USE PLASTICS SYRINGES FOR MEDICAL PURPOSES - SINGLE USE PLASTICS SYRINGES FOR GENERAL USE - DIMENSIONS, REQUIREMENTS, TEST |
| DIN 15155:1986-12 | PALLETS - BOX PALLET WITH MESH SIDE PANELS AND 2 FRONTSIDE FLAPS |
| DIN 17205:1992-04 | QUENCHED AND TEMPERED STEEL CASTINGS FOR GENERAL APPLICATIONS - TECHNICAL DELIVERY CONDITIONS |
| DIN 1913-1:1984-06 | COVERED ELECTRODES FOR THE JOINT WELDING OF UNALLOYED AND LOW ALLOY STEEL - CLASSIFICATION, DESIGNATION, TECHNICAL DELIVERY CONDITIONS |
| DIN 3990-5:1987-12 | CALCULATION OF LOAD CAPACITY OF CYLINDRICAL GEARS; ENDURANCE LIMITS AND MATERIAL QUALITIES |
| DIN 29782:1988-07 | Aerospace; wire thread inserts; free running or screw-locking; technical specification |
| DIN 1690-10:1991-01 | TECHNICAL DELIVERY CONDITIONS FOR CASTINGS OF METALLIC MATERIALS - SUPPLEMENTARY SPECIFICATIONS FOR STEEL CASTINGS FOR HIGHER STRESSED VALVES |
| DIN 17465:1993-08 | HEAT RESISTING STEEL CASTINGS - TECHNICAL DELIVERY CONDITIONS |
| DIN 65629:1993-12 | AEROSPACE; FABRIC SHEET AND TAPE PREPREG FROM CARBON FIBRES AND NON-REACTIVE THERMOPLASTICS; TECHNICAL SPECIFICATION |
| DIN EN 10242:1995-03 | THREADED PIPE FITTING IN MALLEABLE CAST IRON |
| DIN 22257:1990-06 | SCRAPER BARS FOR CHAIN CONVEYORS - OUTBOARD CHAIN ASSEMBLY - DIMENSIONS, REQUIREMENTS, TESTING |
| BWB TL 4210-0060 : 3ED 1995 | FIRE EXTINGUISHING EQUIPMENT SET, AIR FOAM |
| BWB TL 8030-0007 : 4ED 1985 | SEALING COMPOUND FOR PACKAGES (HOT-DIP PROCESS) |
| DIN 65300:1988-12 | AEROSPACE; UNIVERSAL JOINTS, NEEDLE BEARING SUPPORTED, LONG-TIME LUBRICATED, FOR ROTARY SHAFTS; TECHNICAL SPECIFICATION |
| DIN 65066:1991-08 | AEROSPACE; TEXTILE GLASS; WOVEN GLASS FILAMENT FABRIC; TECHNICAL SPECIFICATION |
| FDBR 159 : 2004 | SCHWEISSTECHNIK - VERZICHT AUF WAERMEBEHANDLUNG VON NICHT UEBERWACHUNGSBEDUERFTIGEN ANLAGENTEILEN |
| DIN 8559-1:1984-07 | WELDING FILLER METALS FOR GAS-SHIELDED WELDING; WIRE ELECTRODES FILLER RODS AND SOLID WIRES FOR GAS-SHIELDED WELDING OF UNALLOYED AND ALLOYED STEELS |
| DIN 8563-10:1984-12 | QUALITY ASSURANCE OF WELDED STRUCTURES; STUD WELDED JOINTS, STUD WELDING WITH DRAWN-ARC IGNITION AND RING IGNITION |
| DIN 65054:1989-06 | AEROSPACE; PRESSURE SENSITIVE ADHESIVE FILMS FOR MARKING; TECHNICAL SPECIFICATION |
| BWB TL 7930-0005 : 4ED 1986 | CLEANING AGENT FOR DISHWASHERS |
| BWB TL 7930-0013 : 4ED 1986 | CURD SOAP |
| DIN 6624-1:1989-09 | Horizontal single-wall steel tanks with capacities between 1000 and 5000 litres, for the above ground storage of flammable and non-flammable water polluting liquids |
| BWB TL 3990-0033 : 4ED 1994 | LOADING GEAR, KIT FOR PROJECTILE AND PROPELLANT HANDLING |
| DIN 17458:1985-07 | SEAMLESS CIRCULAR AUSTENITIC STAINLESS STEEL TUBES SUBJECT TO SPECIAL REQUIREMENTS - TECHNICAL DELIVERY CONDITIONS |
| DIN 2413-1:1993-10 | STEEL PIPES - DESIGN OF STEEL PRESSURE PIPES |
| DIN 17615-1:1987-01 | ALMGSIO,5 PRECISION PROFILES - TECHNICAL DELIVERY CONDITIONS |
| BWB TL 4510-0006 : 2ED 1995 | HAND SHOWER, CONTROLLABLE, WITH DIMENSIONALLY STABLE HOSE, 3 M |
| DIN 83305-3:1990-06 | FIBRE ROPES; REQUIREMENTS |
| DIN 1736-1:1985-08 | WELDING FILLER METALS FOR NICKEL AND NICKEL ALLOYS - COMPOSITION, APPLICATION AND TECHNICAL DELIVERY CONDITIONS |
| DIN 61855-1:1987-04 | TEXTILE GLASS; GLASS ROVING FOR PLASTICS REINFORCEMENT; TECHNICAL DELIVERY CONDITIONS |
| BWB TL 6810-0070 : 4ED 1981 | ETHER (DIETHYL ETHER) |
| BWB TL 6810-0027 : 1ED 1982 | METHYL ISOBUTYL KETONE, PURE (4-METHYL-PENTANONE-2, MIBK) |
| DIN 8555-1:1983-11 | FILLER METALS USED IN SURFACING - SOLID WIRES, FILLER RODS, WIRE ELECTRODES, DESIGNATION, TECHNICAL DELIVERY CONDITIONS |
| BWB TL 6810-0018 : 2ED 1980 | LIGHT METAL TESTER - REAGENT |
| BWB TL 6810-0025 : 3ED 1986 | SODIUM BICARBONATE, INDUSTRIAL (NATRII HYDROGENOCARBONAS SODIUM BICARBONATE) |
| DIN 2395-3:1981-08 | RECTANGULAR AND SQUARE ELECTRIC-WELDED PRECISION STEEL TUBES - DIMENSIONS AND TECHNICAL CONDITIONS OF DELIVERY FOR TUBES TO BE USED IN MOTOR VEHICLE CONSTRUCTION |
| DIN 20024 Beiblatt 1:1987-02 | FLUID SYSTEMS - HOSES AND HOSE ASSEMBLIES - TEST METHODS, SUGGESTION FOR THE CONFIGURATION OF DOCUMENTS |
| DIN 8513-4:1981-02 | BRAZING AND BRAZE WELDING FILLER METALS - ALUMINIUM BASE, COMPOSITION, USE, TECHNICAL TERMS OF DELIVERY |
| BWB TL 6810-0071 : 3ED 1984 | POTASSIUM HYDROXIDE FOR NICKEL CADMIUM BATTERY |
| BWB TL 6675-0035 : 3ED 1994 | DRAWING BOARDS WITH 2 ADJUSTABLE SUPPORTS |
| BWB TL 4940-0023 : 4ED 1982 | SPRAY TABLE WITH ROTATABLE TOP |
| BWB TL 4940-0021 : 5ED 1985 | PAINT SPRAY GUN (COMPRESSED-AIR) |
| BWB TL 4230-0014 : 2ED 1995 | COLLAPSIBLE RACK FOR THE HANGING OF TRANSPORT BAGS FOR CONTAMINATED CLOTHING AND EQUIPMENT |
| DIN 17445:1984-11 | STAINLESS STEEL CASTINGS - TECHNICAL DELIVERY CONDITIONS |
| DIN 8513-5:1983-02 | BRAZING ALLOYS - FILLER METALS AN NICKEL-BASE FOR HIGH TEMPERATURE BRAZING, USE, COMPOSITION, TECHNICAL TERMS OF DELIVERY |
| DIN 65090:1979-07 | AEROSPACE; TEXTILE GLASS, PREIMPREGNATED FILAMENT GLASS CLOTH FROM E-GLASS (PREPREG), TECHNICAL SPECIFICATIONS |
| DIN 17443:1986-04 | ROLLED AND WROUGHT STAINLESS STEEL PRODUCTS FOR SURGICAL IMPLANTS - TECHNICAL DELIVERY CONDITIONS |
| DIN 83305-4:1989-05 | FIBRE ROPES; TESTING |
| DIN 46400-1:1983-04 | STEEL FLAT PRODUCTS WITH SPECIAL MAGNETIC PROPERTIES; MAGNETIC STEEL SHEET AND STRIP, COLD ROLLED, NON-ORIENTED, FINALLY ANNEALED CONDITIONS; TECHNICAL DELIVERY CONDITIONS |
| DIN 3754-1:1984-05 | GASKET MATERIALS - COMPRESSED ASBESTOS FIBRE SHEETS - DIMENSIONS, REQUIREMENTS, TESTING |
| DIN 1654-1:1989-10 | COLD HEADING AND COLD EXTRUDING STEELS - TECHNICAL DELIVERY CONDITIONS - GENERAL |
| DIN 29978:1994-12 | AEROSPACE - HONEYCOMB CORES, HEXAGONAL EXPANDED, IN WROUGHT ALUMINIUM ALLOY, CORROSION PROTECTED, UNPERFORATED OR PERFORATED - TECHNICAL SPECIFICATION |
| DIN 40500-2:1980-04 | COPPER FOR ELECTRICAL PURPOSES; TUBES, TECHNICAL TERMS OF DELIVERY |
| DIN 40500-1:1980-04 | COPPER FOR ELECTRICAL PURPOSES; SHEET AND STRIP, TECHNICAL TERMS OF DELIVERY |
| DIN 15063:1977-12 | LIFTING APPLIANCES; SHEAVES, TECHNICAL CONDITIONS |
| DIN 17280:1985-07 | STEELS WITH LOW TEMPERATURE TOUGHNESS - TECHNICAL DELIVERY CONDITIONS FOR PLATE, SHEET, STRIP, WIDE FLATS, SECTIONS, BARS AND FORGINGS |
| DIN 17457:1985-07 | WELDED CIRCULAR AUSTENITIC STAINLESS STEEL TUBES SUBJECT TO SPECIAL REQUIREMENTS - TECHNICAL DELIVERY CONDITIONS |
| DIN 29963:1979-12 | AEROSPACE; EXPANDING ADHESIVE FILMS FOR STRUCTURAL PARTS; TECHNICAL SPECIFICATION |
| DIN 65166:1986-09 | AEROSPACE; WROUGHT ALUMINIUM ALLOY WEDGE; TECHNICAL SPECIFICATIONS |
| DIN 82024:1990-08 | ROUND EYE PLATES |
| DIN 4922-1:1978-02 | STEEL FILTER PIPES FOR DRILLED WELLS AND SLOT PERFORATION AND FISCHING (BUTT STRAP JOINT) |
Hardcopy - English
PDF - English
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.