|
DIN 14307-2:1986-11
|
ALUMINIUM ALLOY SOLID COUPLING TYPE C, WITH SEALING RING FOR SUCTION PURPOSES - NOMINAL PRESSURE 16 |
|
BWB TL 4240-0057 : 1ED 2002
|
SPECIAL FILTER, NBC PROTECTION, FLYING PERSONNEL |
|
DIN VDE 0291-2 : 1979
|
COMPOUNDS FOR USE IN CABLE ACCESSORIES; CASTING RESINOUS COMPOUNDS BEFORE CURE AND IN THE CURED STATE |
|
DIN 46255:1982-11
|
SCREWED GLANDS WITH STEEL CONDUIT THREAD, HEAVY DUTY CONSTRUCTION; DIMENSIONS, MOUNTING INSTRUCTIONS |
|
DIN 14308-2:1986-11
|
ALUMINIUM ALLOY SOLID COUPLING TYPE B, WITH SEALING RING FOR SUCTION PURPOSES - NOMINAL PRESSURE 16 |
|
BWB TL 4240-0017 : 1ED 2002
|
SCREW FILTER, NON MAGNETIZABLE FOR NBC PROTECTIVE MASK |
|
DIN 57291-2 : 1979
|
COMPOUNDS FOR USE IN CABLE ACCESSORIES; CASTING RESINOUS COMPOUNDS BEFORE CURE AND IN THE CURED STATE |
|
UNI CEN/TS 15901-8 : 2010
|
Road and airfield surface characteristics - Part 8: Procedure for determining the skid resistance of a pavement surface by measurement of the sideway-force coefficient (SFCD): SKM |
|
BWB TL 8465-0029 : 8ED 2005
|
BATON, WHITE AND BLACK |
|
DIN 14322:1989-09
|
ALUMINIUM ALLOY SUCTION COUPLING TYPE B, NOMINAL PRESSURE 16 |
|
DIN 14302:1985-04
|
ALUMINIUM ALLOY DELIVERY COUPLING TYPE C - NOMINAL PRESSURE 16 |
|
BS ISO 13628-10 : 2005 AMD 16775
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 10: SPECIFICATION FOR BONDED FLEXIBLE PIPE |
|
03/312144 DC : DRAFT JULY 2003
|
ISO 13628-10 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 10 - BONDED FLEXIBLE PIPE |
|
DIN 13034:1985-12
|
TROLLEY FOR STRETCHERS, HEIGHT-ADJUSTABLE |
|
DIN 14330-2:1985-04
|
ALUMINIUM ALLOY DELIVERY COUPLING TYPE C - NOMINAL PRESSURE 16, USED FOR FIRE HOSES S 32 |
|
SAE MS 1003-2 : 2004
|
Lubricants, Industrial Oils, and Related Products Type D Compressor Oils - Specification - Addendum(Cancelled Jan 2013) |
|
ISO 13628-10:2005
|
Petroleum and natural gas industries — Design and operation of subsea production systems — Part 10: Specification for bonded flexible pipe |
|
DIN 4922-2:1981-04
|
STEEL FILTER PIPES FOR DRILLED WELLS WITH SCREWED CONNECTION DN 100 TO DN 500 |
|
DIN 53120-2:1979-08
|
TESTING OF PAPER AND BOARD; DETERMINATION OF AIR PERMEABILITY; METHOD FOR MEDIUM RATES OF AIR PERMEABILITY ACCORDING TO SCHOPPER |
|
DIN 14461-4:2008-02
|
DELIVERY VALVE INSTALLATIONS FOR FIREFIGHTING PURPOSES - PART 4: FILLING VALVES PN 16 CONNECTED WITH FIREFIGTHING PIPES |
|
DIN 20311:2002-11
|
DRILL TUBES WITH DIAMETERS EXCEEDING 100 MM FOR LARGE HOLE BORINGS IN MINING |
|
DIN 46320-1:1985-09
|
SCREWED GLANDS FOR CABLES; GENERAL APPLICATION; DIMENSIONS, MOUNTING INSTRUCTIONS |
|
DIN 16966-6:1982-07
|
PIPE JOINTS AND THEIR ELEMENTS OF GLASS FIBRE REINFORCED POLYESTER RESINS; BUSHINGS, FLANGES, GASKETS, DIMENSIONS |
|
DIN IEC 60544-2 : 1996
|
GUIDE FOR DETERMINING THE EFFECTS OF IONIZING RADIATION ON INSULATING MATERIALS - PART 2: PROCEDURES FOR IRRADIATION AND TEST |
|
DIN 14461-5:2008-02
|
DELIVERY VALVE INSTALLATIONS FOR FIREFIGHTING PURPOSES - PART 5: TAP PN 16 CONNECTED WITH FIREFIGTHING PIPES |
|
BWB TL 8430-0007 : 14ED 2004
|
SPORTS SHOE, TERRAIN |
|
VDE 0472-631 : 1987
|
TESTING OF CABLES, INSULATED WIRES AND FLEXIBLE CORDS; SHORE D HANDNESS TEST |
|
BWB TL 8415-0309 : 1ED 2006
|
FINGERHANDSCHUH, CHEMIKALIENSCHUTZ FUER PROBENAHMEVORRICHTUNG TPZ-1 ABC |
|
DIN 95366:1996-04
|
ELASTOMER MOUNTS - POT BEARINGS AND FAIL SAFE POT BEARINGS, TYPES A TO G |
|
DIN 73411:1979-07
|
HOSES FOR COOLING PIPES IN MOTOR VEHICLES; REQUIREMENTS, DIMENSIONS, TESTS |
|
BWB TL 4720-0022 : 2ED 2006
|
|
|
DIN 65221:1989-11
|
AEROSPACE; SHEETS FROM RUBBER-CORK; TECHNICAL SPECIFICATION |
|
DIN 53508:2000-03
|
TESTING OF RUBBER AND ELASTOMERS - ACCELERATED AGEING |
|
DIN 16946-1:1989-03
|
Cured casting resins; testing |
|
DIN 14365-1:1991-02
|
MULTI PURPOSE BRANCH PIPES FOR NOMINAL PRESSURE 16 - DIMENSIONS, MATERIALS, CONSTRUCTION, MARKING |
|
BWB TL 7240-0028 : 1ED 1979
|
CANISTER, 5 L, STEEL |
|
DIN 73411-2:1996-10
|
COOLING PIPES IN MOTOR VEHICLES - HOSES AND COMPOUNDS - PART 2: REQUIREMENTS, TESTING |
|
SAE MS 1004 : 2017
|
LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS TYPE H (HYDRAULIC FLUIDS) - SPECIFICATION |
|
SAE MS 1005 : 2017
|
LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS TYPE HF FIRE-RESISTANT HYDRAULIC FLUIDS - SPECIFICATION |
|
BWB TL 6650-0026 : 2ED 1994
|
VISION BLOCK FOR ARMOURED ENGINEER TANK 2 |
|
DIN 539-1:1998-04
|
SCREWED SCALING PLUGS FOR SYPHONS OF DRAIN FITTINGS - PART 1: PLUGS OF COPPER-ZINC ALLOY |
|
DIN 539-2:1998-04
|
SCREWED SCALING PLUGS FOR SYPHONS OF DRAIN FITTINGS - PART 2: PLUGS OF POLYPROPYLEN (PP) |
|
DIN 3535-1:1991-07
|
SEALANTS FOR GAS SUPPLIES; ELASTOMERIC GASKET MATERIALS FOR GAS VALVES IN DOMESTIC INSTALLATIONS; REQUIREMENTS AND TESTS |
|
DIN 3535-3:1986-04
|
SEALS FOR GAS SUPPLY MATERIALS FOR SEALS OF RUBBER GAS SUPPLY MAINS AND PIPELINES, REQUIREMENTS AND TESTS OF MATERIALS |
|
DIN 28052-4:1995-12
|
CHEMICAL APPARATUS - SURFACE TREATMENT OF CONCRETE COMPONENTS IN PROCESS PLANTS USING NON-METALLIC MATERIALS - PART 4: COATING |
|
VDI 3388:2012-03
|
MATERIALS FOR TRIMMING AND FORMING DIES |
|
DIN 14330:2012-05
|
ALUMINIUM ALLOY DELIVERY COUPLING TYPE C NOMINAL PRESSURE PN 16 |
|
DIN 65262-3:1996-11
|
AEROSPACE SERIES - SEALING COMPOUNDS - PART 3: SILICONE-RUBBER BASE; TECHNICAL SPECIFICATION |
|
DIN VDE 0472-631 : 1987
|
TESTING OF CABLES, INSULATED WIRES AND FLEXIBLE CORDS; SHORE D HANDNESS TEST |
|
BWB TL 6920-0104 : 1ED 1993
|
TACTICAL TARGETS, FIRING TRAINING, RIFLE AND MACHINE GUN, PLASTIC |
|
DIN 14319:1985-04
|
ALUMINIUM ALLOY SOLID COUPLING TYPE A WITH METALLIC SEALING AREA AND WITH CAST IRON OR WITH ALUMINIUM ALLOY COVER, TYPE A - NOMINAL PRESSURE 16 |
|
VDE 0291-1 : 1972
|
SPECIFICATION FOR FILLING COMPOUNDS FOR CABLE ACCESSORIES AND FOR SCALDING COMPOUNDS - HOT CAST FILLING COMPOUNDS, FILLING COMPOUNDS FOR COLD PRESSING IN, TWO COMPONENT COLD CAST FILLING & SCALDING COMPOUNDS |
|
DIN 14323:1985-04
|
ALUMINIUM ALLOY DELIVERY AND SUCTION COUPLING TYPE A - NOMINAL PRESSURE 16 |
|
DIN 3485:1984-07
|
VALVES FOR COMPRESSED AIR; GASKETS |
|
DIN 4807-3:1993-10
|
EXPANSION VESSELS, ELASTOMER MEMBRANES; REQUIREMENTS AND TESTING |
|
DIN 14307-1:1985-04
|
ALUMINIUM ALLOY SOLID COUPLING TYPE C WITH SEALING RING FOR PRESSURE PURPOSES - NOMINAL PRESSURE 16 |
|
DIN 46259:1982-11
|
SEALINGS RINGS FOR GLANDS; HEAVY DUTY CONSTRUCTION; CABLE ENTRIES |
|
DIN 4922-2 E : 1981
|
STEEL FILTER PIPES FOR DRILLED WELLS WITH SCREWED CONNECTION DN 100 TO DN 500 |
|
DIN 14362-1:1986-12
|
STRAINER |
|
DIN 28062:1978-08
|
CHEMICAL EQUIPMENT; BUILDING MATERIALS FOR BRICK LINING, CLASSIFICATION, PROPERTIES, TESTING |
|
DIN 16850:1980-11
|
FLOOR COVERING - HOMOGENE AND HETEROGENE ELASTOMERES FLOORING, REQUIREMENTS, TEST METHODS |
|
DIN 53159:2010-08
|
Paints and varnishes - Determination of the degree of chalking of paint coatings by the Kempf method |
|
DIN 18122-1:1997-07
|
SOIL, INVESTIGATION AND TESTING - CONSISTENCY LIMITS - PART 1: DETERMINATION OF LIQUID LIMIT AND PLASTIC LIMIT |
|
API SPEC 17K : 2017
|
SPECIFICATION FOR BONDED FLEXIBLE PIPE |
|
SAE MS 1001 : 2017
|
LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS TYPE A LUBRICANT FOR GENERAL PURPOSE AND TOTAL LOSS SYSTEMS - SPECIFICATION |
|
S.R. CEN/TS 15901-8:2009
|
ROAD AND AIRFIELD SURFACE CHARACTERISTICS - PART 8: PROCEDURE FOR DETERMINING THE SKID RESISTANCE OF A PAVEMENT SURFACE BY MEASUREMENT OF THE SIDEWAY-FORCE COEFFICIENT (SFCD): SKM |
|
DIN EN 13748-1:2005-08
|
TERRAZZO TILES - PART 1: TERRAZZO TILES FOR INTERNAL USE |
|
EN ISO 13628-10:2006
|
Petroleum and natural gas industries - Design and operation of subsea production systems - Part 10: Specification for bonded flexible pipe (ISO 13628-10:2006) |
|
DIN 11851:2013-02
|
Stainless steel fittings for the food and chemical industry - Screw pipe connections for expanding and welding |
|
DIN 53538-6:1993-08
|
STANDARD REFERENCE ELASTOMERS - HYDROGENATED ACRYLONITRILE BUTADIENE RUBBER (HNBR), CROSS-LINKED BY PEROXIDE, FOR CHARACTERIZING SERVICE FLUIDS WITH RESPECT TO THEIR ACTION ON HNBR |
|
BWB TL 9150-0019 : 6ED 1997
|
HYDRAULIC FLUID, MINERAL OIL BASE, NATO CODE: H-573, BUNDESHEWR CODE: HY5040 |
|
DIN 4807-1:1991-05
|
EXPANSION VESSELS; TERMINOLOGY, RELEVANT LEGAL REGULATIONS; TESTING AND MARKING |
|
DIN 4815-4:1987-04
|
HOSES FOR LPG; HOSES AND HOSE ASSEMBLIES FOR FUEL GAS INSTALLATIONS IN VEHICLES |
|
VDE 0291-2 : 1979
|
COMPOUNDS FOR USE IN CABLE ACCESSORIES - CASTING RESINOUS COMPOUNDS BEFORE CURE AND IN THE CURED STATE |
|
BWB TL 2610-0002 : 8ED 2008
|
RETREADING AND REPAIR OF BUNDESWEHR TIRES |
|
BWB TL 8430-0011 : 2ED 2002
|
|
|
DIN 65262-2:1998-05
|
AEROSPACE SERIES - SEALING COMPOUNDS - PART 2: VINYLIDENE FLUORIDE AND HEXAFLUOROPROPYLENE BASE; TECHNICAL SPECIFICATION |
|
DIN 14318:1985-04
|
ALUMINIUM ALLOY SOLID COUPLING TYPE B WITH METALLIC SEALING AREA AND WITH CAST IRON COVER OR WITH ALUMINIUM ALLOY COVER, TYPE B - NOMINAL PRESSURE 16 |
|
DIN 14330-1:1985-04
|
ALUMINIUM ALLOY DELIVERY COUPLING TYPE C - NOMINAL PRESSURE 16, USED FOR FIRE HOSES S 28 |
|
DIN 14321:1985-04
|
ALUMINIUM ALLOY SUCTION COUPLING TYPE C - NOMINAL PRESSURE 16 |
|
BWB TL 4940-0091 : 2ED 2007
|
|
|
DIN 477-4:1982-09
|
COMPRESSED GAS CYLINDER VALVES; SWING CHECK VALVES FOR CAMPING-CYLINDERS |
|
DIN 73379-2:1997-11
|
FUEL HOSES - PART 2: REQUIREMENTS AND TESTS |
|
BWB TL 9150-0025 : 4ED 1998
|
STEAM TURBINE OIL, NATO CODE: O-250, BUNDESWEHR CODE: OY1150 |
|
DIN 2828:1994-02
|
CAM LOCKING COUPLINGS FOR HOSE ASSEMBLIES - NOMINAL PRESSURE 10 |
|
DIN 14309:1985-04
|
ALUMINIUM ALLOY SOLID COUPLING TYPE A WITH SEALING RING FOR PRESSURE AND SUCTION PURPOSES - NOMINAL PRESSURE 16 |
|
DIN 14308-1:1985-04
|
ALUMINIUM ALLOY SOLID COUPLING TYPE B WITH SEALING RING FOR PRESSURE PURPOSES - NOMINAL PRESSURE 16 |
|
DIN 14306:1986-11
|
ALUMINIUM ALLOY SOLID COUPLING TYPE D FOR PRESSURE AND SUCTION PURPOSES - NOMINAL PRESSURE 16 |
|
DIN 65271:2002-07
|
AEROSPACE SERIES - ELASTOMERIC SEMI-FINISHED PRODUCTS AND PARTS - TECHNICAL SPECIFICATION |
|
DIN 477-6:1983-03
|
GAS CYLINDER VALVES - TEST PRESSURES 300 BAR AND 450 BAR, WITH CYLINDRICAL THREAD FOR VALVE STEM AND GAS CYLINDER NECK FOR BREATHING APPARATUS - SIZES, THREADS |
|
DIN 4815-3:1985-07
|
FLEXIBLE TUBES FOR LPG; FLEXIBLE TUBES FOR FILLING AND EMPTYING OF TRANSPORTATION VEHICLES |
|
SAE MS 1006 : 2018
|
LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS TYPE F LUBRICANT FOR SPINDLE BEARINGS, AND ASSOCIATED CLUTCHES - SPECIFICATION |
|
SAE MS 1009 : 2012
|
LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS TYPE P PNEUMATIC TOOL OILS - SPECIFICATION |
|
SAE MS 1003 : 2018
|
LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS TYPE D COMPRESSOR OILS - SPECIFICATION |
|
DIN EN 13831:2007-12
|
Closed expansion vessels with built in diaphragm for installation in water |
|
BS EN ISO 13628-10:2006
|
Petroleum and natural gas industries. Design and operation of subseaprod uction systems Specification for bonded flexible pipe |
|
BS EN 13831:2007
|
Closed expansion vessels with built-in diaphragm for installation in water |
|
EN 13831:2007
|
Closed expansion vessels with built in diaphragm for installation in water |
|
DIN 1048-5:1991-06
|
TESTING CONCRETE - TESTING OF HARDENED CONCRETE (SPECIMENS PREPARED IN MOULD) |
|
BWB TL 9150-0058 : 6ED 2002
|
LUBRICATING OIL, REFRIGERANT COMPRESSOR NATO CODE: O-283 BUNDESWEHR CODE: OY1165 |
|
DIN 14303:2013-02
|
ALUMINIUM ALLOY DELIVERY COUPLING TYPE B WITH NOMINAL PRESSURE PN 16 |
|
BWB TL 2530-0039 : 6ED 2008
|
REPAIR OF ROAD WHEEL FOR MTW M113 AND PZH M109 |
|
BWB TL 4940-0097 : 1ED 2007
|
|
|
BWB TL 7240-0022 : 5ED 2003
|
MILITARY CAN, 20 LITRE (STEEL CANISTER) |
|
DIN 14301:1985-04
|
ALUMINIUM ALLOY DELIVERY AND SUCTION COUPLING TYPE D - NOMINAL PRESSURE |
|
DIN 42562-2:1987-04
|
TRANSFORMERS - DEHYDRATING BREATHER - CAPACITY 1.2 TO 4.8 KG - COMPONENTS |
|
DIN 14317:1985-04
|
ALUMINIUM ALLOY SOLID COUPLING TYPE C WITH METALLIC SEALING AREA AND WITH CAST IRON COVER OR WITH ALUMINIUM ALLOY COVER, TYPE C - NOMINAL PRESSURE 16 |
|
00/705406 DC : 0
|
PREN 13831 - CLOSED EXPANSION VESSELS WITH BUILT IN DIAPHRAGM FOR INSTALLATION IN WATER SYSTEMS |
|
SAE MS 1002 : 2017
|
LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS TYPE C (GEARS) SPECIFICATION |
|
DIN 95363:1994-07
|
ELASTOMER MOUNTS; STUD MOUNTS; TYPES A TO F |
|
DIN 53120-2 E : 1979
|
TESTING OF PAPER AND BOARD; DETERMINATION OF AIR PERMEABILITY; METHOD FOR MEDIUM RATES OF AIR PERMEABILITY ACCORDING TO SCHOPPER |
|
SAE MS 1000 : 2013
|
LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS - CLASSIFICATION |
|
DIN 42552:2009-08
|
TRANSFORMERS - OIL LEVEL INDICATOR WITH SCREWPLUG |
|
DIN 28055-2:2002-04
|
CHEMICAL APPARATUS - SURFACE PROTECTION WITH ORGANIC LININGS FOR APPLICATION TO METALLIC COMPONENTS - PART 2: PROOF OF SUITABILITY AND TESTING |
|
CEN/TS 15901-8:2009
|
Road and airfield surface characteristics - Part 8: Procedure for determining the skid resistance of a pavement surface by measurement of the sideway-force coefficient (SFCD): SKM |