DIN 8075:2011-12
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
POLYETHYLENE (PE) PIPES - PE 80, PE 100 - GENERAL QUALITY REQUIREMENTS, TESTING
Hardcopy , PDF
03-07-2021
German
01-01-2011
This standard is included in DIN Handbook 52 and 91.
DevelopmentNote |
Supersedes DIN 8075-1 and DIN 8075-2. (07/2002) DRAFT 2017 issued in August 2017. (08/2017)
|
DocumentType |
Standard
|
Pages |
25
|
PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
DIN 19537-2:1988-01 | PIPES AND FITTINGS OF HIGH DENSITY POLYETHYLENE (PE-HD) FOR DRAINAGE AND SEWERAGE - TECHNICAL SPECIFICATIONS FOR DELIVERY |
DIN 16966-1:1988-11 | PIPE JOINTS AND THEIR ELEMENTS OF GLASS FIBRE REINFORCED RESINS - FITTINGS - GENERAL QUALITY REQUIREMENTS AND TEST METHODS |
DIN 18302:2016-09 | GERMAN CONSTRUCTION CONTRACT PROCEDURES (VOB) - PART C: GENERAL TECHNICAL SPECIFICATIONS IN CONSTRUCTION CONTRACTS (ATV) - BOREHOLE SINKING OPERATIONS |
DIN 16963-11:1999-10 | PIPE JOINTS AND COMPONENTS OF POLYETHYLENE (PE) FOR PIPES UNDER PRESSURE, PE 80 AND PE 100 - PART 11: FLANGE ADAPTERS, FLANGES, SEALING RINGS FOR SOCKET WELDING - DIMENSIONS |
DIN HDBK 52 : 7ED 2014 | ROHRE, ROHRLEITUNGSTEILE UND ROHRVERBINDUNGEN AUS THERMOPLASTISCHEN KUNSTSTOFFEN |
DIN EN 15001-1:2011-02 | Gas infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing |
DIN 16963-15:1987-06 | PIPE JOINT ASSEMBLIES AND FITTINGS OF HIGH-DENSITY POLYETHYLENE (PE-HD) PRESSURE PIPES - THREADED PIPE JOINTS - DIMENSIONS |
DIN 8074:2011-12 | Polyethylene (PE) - Pipes PE 80, PE 100 - Dimensions; Text in German and English |
DIN 19533:1976-03 | PIPELINES OF HIGH-DENSITY PE (HIGH-DENSITY POLYETHYLENE) AND LOW-DENSITY PE (LOW DENSITY POLYETHYLENE) FOR DRINKING WATER SUPPLY - PIPES, PIPE CONNECTIONS AND FITTINGS FOR PIPE-LINES |
DIN 16966-7:1995-04 | PIPE JOINTS AND THEIR ELEMENTS OF GLASS FIBRE REINFORCED POLYESTER RESINS - PART 7: BUSHINGS, FLANGES, FLANGED AND BUTT JOINTS - GENERAL QUALITY REQUIREMENTS AND TEST METHODS |
I.S. EN 15001-1:2009 | GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING |
VDI 4640 Blatt 4:2004-09 | Thermal use of the underground - Direct uses |
VDI 4640 Blatt 3:2001-06 | Utilization of the subsurface for thermal purposes - Underground thermal energy storage |
VDI 4640 Blatt 2:2001-09 | Thermal use of the underground - Ground source heat pump systems |
UNE-EN 15001-1:2010 | Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing |
UNI EN 15001-1 : 2009 | GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING |
DIN 19555:2003-04 | STEP IRONS FOR SINGLE-LINE INSTALLATION - STEP IRONS FOR SETTING IN CONCRETE |
DIN 8076-3:1994-08 | PRESSURE PIPELINES MADE FROM THERMOPLASTICS MATERIALS - PLASTIC JOINTS FOR PE PIPES; GENERAL QUALITY REQUIREMENTS, TESTING |
DIN 16961-2:2010-03 | THERMOPLASTICS PIPES AND FITTINGS WITH PROFILED WALL AND SMOOTH PIPE INSIDE - PART 2: TECHNICAL DELIVERY SPECIFICATIONS |
DIN 4102-4:2016-05 | FIRE BEHAVIOUR OF BUILDING MATERIALS AND BUILDING COMPONENTS - PART 4: SYNOPSIS AND APPLICATION OF CLASSIFIED BUILDING MATERIALS, COMPONENTS AND SPECIAL COMPONENTS |
DIN 16917-1:2015-10 | PIPES AND FITTINGS MADE OF THERMOPLASTIC MATERIALS WITH PROFILED WALL AND SMOOTH PIPE INSIDE - LARGE PIPES OVER DN 1200 FOR UNDERGROUND INSTALLATION - PART 1: GENERAL REQUIREMENTS AND PERFORMANCE CHARACTERISTICS |
DIN HDBK 91 : 11ED 2016 | BOHRARBEITEN, ARBEITEN ZUM AUSBAU VON BOHRUNGEN, WASSERHALTUNGSARBEITEN VOB/STLB-BAU - VOB TEIL C: ATV DIN 18299, ATV DIN 18301, ATV DIN 18302, ATV DIN 18305 |
EN 15001-1:2009 | Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing |
DVGW GW 320-1 : 2009 | REHABILITATION OF GAS AND WATER PIPE LINES WITH PE-HD PIPES BY LINING WITH CONTINUOUS OR DISCRETE PIPE - REQUIREMENTS, QUALITY CONTROL, TESTING |
DIN 16888-1:1989-06 | VALUATION OF CHEMICAL RESISTANCE OF PIPES OF THERMOPLASTICS MATERIALS - PIPES OF POLYOLEFINES |
BS EN 15001-1:2009 | Gas infrastructure. Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations Detailed functional requirements for design, materials, construction, inspection and testing |
ASTM F 2165 : 2013-12 | SPECIFICATION FOR FLEXIBLE PRE-INSULATED PIPING |
NSF 14 : 2016 | PLASTICS PIPING SYSTEM COMPONENTS AND RELATED MATERIALS |
DIN EN ISO 10931:2015-11 | PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - POLY(VINYLIDENE FLUORIDE) (PVDF) - SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM (ISO 10931:2005 + AMD 1:2015) |
DIN EN ISO 1167-1:2006-05 | Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 1: General method (ISO 1167-1:2006) |
DIN EN ISO 9080:2013-02 | PLASTICS PIPING AND DUCTING SYSTEMS - DETERMINATION OF THE LONG-TERM HYDROSTATIC STRENGTH OF THERMOPLASTICS MATERIALS IN PIPE FORM BY EXTRAPOLATION (ISO 9080:2012) |
DIN EN ISO 1167-2:2006-05 | Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 2: Preparation of pipe test pieces (ISO 1167-2:2006) |
DIN EN 12201-2:2013-12 | Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 2: Pipes (includes Amendment A1:2013) |
DIN IEC 60093 : 1993 | METHODS OF TEST FOR INSULATING MATERIALS FOR ELECTRICAL PURPOSES; VOLUME RESISTIVITY AND SURFACE RESISTIVITY OF SOLID ELECTRICAL INSULATING MATERIALS |
ISO 4427-3:2007 | Plastics piping systems Polyethylene (PE) pipes and fittings for water supply Part 3: Fittings |
DIN EN 12201-1:2011-11 | Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 1: General |
ISO 4427-1:2007 | Plastics piping systems Polyethylene (PE) pipes and fittings for water supply Part 1: General |
ISO 161-1:1996 | Thermoplastics pipes for the conveyance of fluids Nominal outside diameters and nominal pressures Part 1: Metric series |
ISO 18553:2002 | Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds |
DIN 4102-1:1998-05 | FIRE BEHAVIOUR OF BUILDING MATERIALS AND BUILDING COMPONENTS - PART 1: BUILDING MATERIALS; CONCEPTS, REQUIREMENTS AND TESTS |
DIN 53752:1980-12 | TESTING OF PLASTICS; DETERMINATION OF THE COEFFICIENT OF LINEAR THERMAL EXPANSION |
DIN EN ISO 1183-1:2013-04 | PLASTICS - METHODS FOR DETERMINING THE DENSITY OF NON-CELLULAR PLASTICS - PART 1: IMMERSION METHOD, LIQUID PYKNOMETER METHOD AND TITRATION METHOD (ISO 1183-1:2012) |
DIN EN ISO 1183-3:2000-05 | PLASTICS - METHODS FOR DETERMINING THE DENSITY OF NON-CELLULAR PLASTICS - PART 3: GAS PYKNOMETER METHOD |
DIN 52612-1:1979-09 | TESTING OF THERMAL INSULATING MATERIALS; DETERMINATION OF THERMAL CONDUCTIVITY BY THE GUARDED HOT PLATE APPARATUS; TEST PROCEDURE AND EVALUATION OF RESULTS |
DIN EN 1555-1:2010-12 | Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1: General |
DIN EN 10204:2005-01 | Metallic products - Types of inspection documents; German version EN 10204:2004 |
ISO/TR 10837:1991 | Determination of the thermal stability of polyethylene (PE) for use in gas pipes and fittings |
DIN CEN/TS 14541 : 2013 | PLASTICS PIPES AND FITTINGS - CHARACTERISTICS FOR UTILISATION OF NON-VIRGIN PVC-U, PP AND PE MATERIALS |
DIN EN ISO 15494:2016-03 | PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - POLYBUTENE (PB), POLYETHYLENE (PE), POLYETHYLENE OF RAISED TEMPERATURE RESISTANCE (PE-RT), CROSSLINKED POLYETHYLENE (PE-X), POLYPROPYLENE (PP) - METRIC SERIES FOR SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM (ISO 15494:2015) |
DIN 8074:2011-12 | Polyethylene (PE) - Pipes PE 80, PE 100 - Dimensions; Text in German and English |
ISO 11357-6:2008 | Plastics Differential scanning calorimetry (DSC) Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) |
ISO 4065:1996 | Thermoplastics pipes Universal wall thickness table |
DIN EN ISO 12162:2010-04 | Thermoplastics materials for pipes and fittings for pressure applications - Classification, designation and design coefficient (ISO 12162:2009) |
DIN EN 1555-2:2010-12 | Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 2: Pipes |
VDE 0303-30 : 1993 | METHODS OF TEST FOR INSULATING MATERIALS FOR ELECTRICAL PURPOSES; VOLUME RESISTIVITY AND SURFACE RESISTIVITY OF SOLID ELECTRICAL INSULATING MATERIALS |
DIN EN ISO 1872-2:2007-05 | PLASTICS - POLYETHYLENE (PE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
DIN EN ISO 1133-1:2012-03 | Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method (ISO 1133-1:2011) |
ISO 4427-2:2007 | Plastics piping systems Polyethylene (PE) pipes and fittings for water supply Part 2: Pipes |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.