• There are no items in your cart

DIN EN 1011-6:2006-03

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

WELDING - RECOMMENDATION FOR WELDING OF METALLIC MATERIALS - PART 6: LASER BEAM WELDING
Available format(s)

Hardcopy , PDF

Superseded date

02-13-2021

Language(s)

English

Published date

01-01-2006

1 Scope
2 Normative references
3 Terms and definitions
4 Health and safety and protection of the environment
5 Quality requirements
6 Equipment
   6.1 General
   6.2 Provisions for acceptance testing
   6.3 Provisions for maintenance and calibration
7 Qualification of welding personnel
8 Welding procedure specification
9 Welding procedure test
10 Consumables
   10.1 Filler metals
   10.2 Gases
11 Design
   11.1 Overall design of structure or product
   11.2 Joint design
   11.3 Joint preparation
12 Laser beam welding
   12.1 Characteristics
   12.2 Advantages and limitations
   12.3 Assembling and fixtures
   12.4 Process control
   12.5 Inspection and testing
   12.6 Imperfections
Annex A (informative) Equipment
   A.1 Description of laser process
   A.2 Laser beam sources
   A.3 Guiding, shaping and focusing the beam
   A.4 Devices used to create a relative movement between the
       laser beam and the work piece
   A.5 Fixtures used to hold the work piece
   A.6 Cooling systems
   A.7 Control systems
Annex B (informative) Laser beam properties
Annex C (informative) Information about weldability of metallic
                      materials
   C.1 General
   C.2 Steels and iron alloys
   C.3 Nickel alloys
   C.4 Aluminium and magnesium alloys
   C.5 Copper and its alloys
   C.6 Refractory and reactive metals
   C.7 Titanium and its alloys
   C.8 Dissimilar metals
   C.9 Non-metals
Annex D (informative) Information about causes of weld
                      imperfections and prevention
Annex E (informative) Beam control and monitoring
   E.1 General
   E.2 Focus point
   E.3 Beam alignment and pilot beam coincidence
   E.4 Beam power
   E.5 Beam power distribution
   E.6 Nozzle alignment
   E.7 Pulsed beam power data
   E.8 Manipulators, guides etc.
Annex F (informative) Laser beam processing
   F.1 Laser beam cutting
   F.2 Laser beam drilling
   F.3 Laser beam surface treatment
   F.4 Laser beam cladding characteristics
   F.5 Laser beam marking and engraving
Bibliography

This standard is included in DIN Handbook 277, DIN DVS HDBK 283 and 284. Defines general guidance for laser beam welding and associated processes of metallic materials in all forms of product.

DevelopmentNote
DRAFT 2017 issued in July 2017. (07/2017)
DocumentType
Standard
Pages
42
PublisherName
German Institute for Standardisation (Deutsches Institut für Normung)
Status
Superseded
SupersededBy

Standards Relationship
BS EN 1011-6:2005 Identical
I.S. EN 1011-6:2006 Identical
NBN EN 1011-6 : 2006 Identical
NS EN 1011-6 : 1ED 2006 Identical
UNE-EN 1011-6:2006 Identical
NF EN 1011-6 : 2006 Identical
ONORM EN 1011-6 : 2006 Identical
UNI EN 1011-6 : 2006 Identical
SN EN 1011-6 : 2006 Identical
NEN EN 1011-6 : 2006 Identical
EN 1011-6:2005 Identical

DIN DVS HDBK 283 : 5ED 2017 SCHWEISSTECHNIK 6 - ELEKTRONENSTRAHLSCHWEISSEN, LASERSTRAHLSCHWEISSEN - NORMEN, RICHTLINIEN UND MERKBLAETTER
DIN HDBK 277 : 3ED 2005
DIN DVS HDBK 284 : 4ED 2014 SCHWEISSTECHNIK 7 - SCHWEISSTECHNISCHE FERTIGUNG, SCHWEISSVERBINDUNGEN

EN ISO 15616-2:2003 Acceptance tests for CO2-laser beam machines for high quality welding and cutting - Part 2: Measurement of static and dynamic accuracy (ISO 15616-2:2003)
EN ISO 6520-1:2007 Welding and allied processes - Classification of geometric imperfections in metallic materials - Part 1: Fusion welding (ISO 6520-1:2007)
EN 12073 : 1999 WELDING CONSUMABLES - TUBULAR CORED ELECTRODES FOR METAL ARC WELDING WITH OR WITHOUT A GAS SHIELD OF STAINLESS AND HEAT-RESISTING STEELS - CLASSIFICATION
EN ISO 11553-1:2008 Safety of machinery - Laser processing machines - Part 1: General safety requirements (ISO 11553-1:2005)
EN 20286-2 : 1993 ISO SYSTEM OF LIMITS AND FITS - TABLES OF STANDARD TOLERANCE GRADES AND LIMIT DEVIATIONS FOR HOLES AND SHAFTS
EN ISO 22827-1:2005 Acceptance tests for Nd:YAG laser beam welding machines - Machines with optical fibre delivery - Part 1: Laser assembly (ISO 22827-1:2005)
EN ISO 15614-11:2002 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 11: Electron and laser beam welding (ISO 15614-11:2002)
ISO 6520-1:2007 Welding and allied processes Classification of geometric imperfections in metallic materials Part 1: Fusion welding
EN 12070 : 1999 WELDING CONSUMABLES - WIRE ELECTRODES, WIRES AND RODS FOR ARC WELDING OF CREEP-RESISTING STEELS - CLASSIFICATION
ISO 11554:2017 Optics and photonics — Lasers and laser-related equipment — Test methods for laser beam power, energy and temporal characteristics
EN 439 : 1994 WELDING CONSUMABLES - SHIELDING GASES FOR ARC WELDING AND CUTTING
EN ISO 15616-1:2003 Acceptance tests for CO2-laser beam machines for high quality welding and cutting - Part 1: General principles, acceptance conditions (ISO 15616-1:2003)
EN ISO 3834-2:2005 Quality requirements for fusion welding of metallic materials - Part 2: Comprehensive quality requirements (ISO 3834-2:2005)
EN 440 : 1994 WELDING CONSUMABLES - WIRE ELECTRODES AND DEPOSITS FOR GAS SHIELDED METAL ARC WELDING OF NON ALLOY AND FINE GRAIN STEELS - CLASSIFICATION
ISO 13920:1996 Welding — General tolerances for welded constructions — Dimensions for lengths and angles — Shape and position
EN 60825-1:2014/AC:2017-06 SAFETY OF LASER PRODUCTS - PART 1: EQUIPMENT CLASSIFICATION AND REQUIREMENTS (IEC 60825-1:2014)
ISO 13919-1:1996 Welding Electron and laser-beam welded joints Guidance on quality levels for imperfections Part 1: Steel
ISO 15614-11:2002 Specification and qualification of welding procedures for metallic materials Welding procedure test Part 11: Electron and laser beam welding
EN ISO 15613:2004 Specification and qualification of welding procedures for metallic materials - Qualification based on pre-production welding test (ISO 15613:2004)
ISO 13694:2015 Optics and photonics Lasers and laser-related equipment Test methods for laser beam power (energy) density distribution
ISO 17662:2016 Welding — Calibration, verification and validation of equipment used for welding, including ancillary activities
ISO/TR 15608:2017 Welding Guidelines for a metallic materials grouping system
CR ISO 15608 : 2000 WELDING - GUIDELINES FOR A METALLIC MATERIAL GROUPING SYSTEM
ISO 15616-2:2003 Acceptance tests for CO2-laser beam machines for high quality welding and cutting Part 2: Measurement of static and dynamic accuracy
EN 1011-1:2009 Welding - Recommendations for welding of metallic materials - Part 1: General guidance for arc welding
ISO 10218:1992 Manipulating industrial robots Safety
EN 12535 : 2000 WELDING CONSUMABLES - TUBULAR CORED ELECTRODES FOR GAS SHIELDED METAL ARC WELDING OF HIGH STRENGTH STEELS - CLASSIFICATION
IEC 60825-1:2014 Safety of laser products - Part 1: Equipment classification and requirements
DIN V 1738:2000-07 WELDING - GUIDELINES FOR A METALLIC MATERIAL GROUPING SYSTEM
EN 12071 : 1999 WELDING CONSUMABLES - TUBULAR CORED ELECTRODES FOR GAS SHIELDED METAL ARC WELDING OF CREEP-RESISTING STEELS - CLASSIFICATION
ISO 18273:2015 Welding consumables Wire electrodes, wires and rods for welding of aluminium and aluminium alloys Classification
ISO 9013:2017 Thermal cutting — Classification of thermal cuts — Geometrical product specification and quality tolerances
ISO 18274:2010 Welding consumables — Solid wire electrodes, solid strip electrodes, solid wires and solid rods for fusion welding of nickel and nickel alloys — Classification
EN ISO 15616-3:2003 Acceptance tests for CO2-laser beam machines for high quality welding and cutting - Part 3: Calibration of instruments for measurement of gas flow and pressure (ISO 15616-3:2003)
EN ISO 11554:2017 Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics (ISO 11554:2017)
EN ISO 18274:2010 Welding consumables - Solid wire electrodes, solid strip electrodes, solid wires and solid rods for fusion welding of nickel and nickel alloys - Classification (ISO 18274:2010)
EN ISO 13919-1:1996 Welding - Electrons and laser beam welded joints - Guidance on quality levels for imperfections - Part 1: Steel (ISO 13919-1:1996)
EN ISO 13920:1996 Welding - General tolerances for welded constructions - Dimensions for lengths and angles - Shape and position (ISO 13920:1996)
ISO 3834-2:2005 Quality requirements for fusion welding of metallic materials Part 2: Comprehensive quality requirements
EN ISO 17662:2016 Welding - Calibration, verification and validation of equipment used for welding, including ancillary activities (ISO 17662:2016)
EN 14640:2005 Welding consumables - Solid wires and rods for fusion welding of copper and copper alloys - Classification
EN ISO 18273:2015 WELDING CONSUMABLES - WIRE ELECTRODES, WIRES AND RODS FOR WELDING OF ALUMINIUM AND ALUMINIUM ALLOYS - CLASSIFICATION (ISO 18273:2015)
EN 12072 : 1999 WELDING CONSUMABLES - WIRE ELECTRODES, WIRES AND RODS FOR ARC WELDING OF STAINLESS AND HEAT-RESISTING STEELS - CLASSIFICATION
EN ISO 3834-5:2015 Quality requirements for fusion welding of metallic materials - Part 5: Documents with which it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2, ISO 3834-3 or ISO 3834-4 (ISO 3834-5:2015)
ISO 22827-1:2005 Acceptance tests for Nd:YAG laser beam welding machines Machines with optical fibre delivery Part 1: Laser assembly
EN ISO 13919-2:2001/A1:2003 WELDING - ELECTRON AND LASER BEAM WELDED JOINTS - GUIDANCE ON QUALITY LEVELS FOR IMPERFECTIONS - PART 2: ALUMINIUM AND ITS WELDABLE ALLOYS
ISO 286-2:2010 Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
ISO 22827-2:2005 Acceptance tests for Nd:YAG laser beam welding machines Machines with optical fibre delivery Part 2: Moving mechanism
EN ISO 14919:2015 Thermal spraying - Wires, rods and cords for flame and arc spraying - Classification - Technical supply conditions (ISO 14919:2015)
EN ISO 11145:2016 Optics and photonics - Lasers and laser-related equipment - Vocabulary and symbols (ISO 11145:2016)
EN 1668 : 1997 WELDING CONSUMABLES - RODS, WIRES AND DEPOSITS FOR TUNGSTEN INERT GAS WELDING OF NON ALLOY AND FINE GRAIN STEELS - CLASSIFICATION
ISO 15616-1:2003 Acceptance tests for CO2-laser beam machines for high quality welding and cutting Part 1: General principles, acceptance conditions
EN ISO 13694:2015 OPTICS AND OPTICAL INSTRUMENTS - LASERS AND LASER-RELATED EQUIPMENT - TEST METHODS FOR LASER BEAM POWER (ENERGY) DENSITY DISTRIBUTION (ISO 13694:2015)
EN ISO 15609-4:2009 Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 4: Laser beam welding (ISO 15609-4:2009)
EN 758 : 1997 WELDING CONSUMABLES - TUBULAR COVERED ELECTRODES FOR METAL ARC WELDING WITH AND WITHOUT A GAS SHIELD OF NON ALLOY AND FINE GRAIN STEELS - CLASSIFICATION
ISO 15613:2004 Specification and qualification of welding procedures for metallic materials Qualification based on pre-production welding test
ISO 11145:2016 Optics and photonics Lasers and laser-related equipment Vocabulary and symbols
EN ISO 22827-2:2005 Acceptance tests for Nd:YAG laser beam welding machines - Machines with optical fibre delivery - Part 2: Moving mechanism (ISO 22827-2:2005)
EN ISO 9013:2017 Thermal cutting - Classification of thermal cuts - Geometrical product specification and quality tolerances (ISO 9013:2017)
EN 775:1992/AC:1993 MANIPULATING INDUSTRIAL ROBOTS - SAFETY
EN 1418:1997 Welding personnel - Approval testing of welding operators for fusion welding and resistance weld setters for fully mechanized and automatic welding of metallic materials
ISO 14919:2015 Thermal spraying — Wires, rods and cords for flame and arc spraying — Classification — Technical supply conditions
ISO 15616-3:2003 Acceptance tests for CO2-laser beam machines for high quality welding and cutting Part 3: Calibration of instruments for measurement of gas flow and pressure
EN 1274:2004 Thermal spraying - Powders - Composition, technical supply conditions
ISO 3834-5:2015 Quality requirements for fusion welding of metallic materials Part 5: Documents with which it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2, ISO 3834-3 or ISO 3834-4
ISO 15609-4:2009 Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 4: Laser beam welding
EN 12534 : 1999 WELDING CONSUMABLES - WIRE ELECTRODES, WIRES, RODS AND DEPOSITS FOR GAS SHIELDED METAL ARC WELDING OF HIGH STRENGTH STEELS - CLASSIFICATION
ISO 13919-2:2001 Welding Electron and laser beam welded joints Guidance on quality levels for imperfections Part 2: Aluminium and its weldable alloys
ISO 11553-1:2005 Safety of machinery Laser processing machines Part 1: General safety requirements

View more information
US$144.05
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.