Name: DIN EN 10169-1:2004-04
Brand: DIN

DIN EN 10169-1:2004-04

Superseded

CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PART 1: GENERAL INFORMATION (DEFINITIONS, MATERIALS, TOLERANCES, TEST METHODS)

Available format(s)

Hardcopy , PDF

Superseded date

02-01-2011

Language(s)

English

Published date

01-01-2004

Publisher

German Institute for Standardisation (Deutsches Institut für Normung)

Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Designation
5 Information to be supplied by the purchaser
6 Requirements
   6.1 General
       6.1.1 Steel substrates
       6.1.2 Organic coatings
       6.1.3 Manufacturing process
   6.2 Coating properties
       6.2.1 General
       6.2.2 Coating thickness and tolerances
       6.2.3 Appearance
       6.2.4 Coating hardness and adhesive strength/flexibility
       6.2.5 Durability
       6.2.6 Other properties
7 Inspection
   7.1 Types of inspection and testing, inspection documents and
       specific tests
   7.2 Test units
   7.3 Number of tests and type of test methods
   7.4 Sampling
   7.5 Test methods
       7.5.1 General
       7.5.2 Coating thickness
       7.5.3 Colour and colour difference
       7.5.4 Specular gloss
       7.5.5 Coating hardness
       7.5.6 Adhesive strength/flexibility
       7.5.7 Durability
       7.5.8 Inspection on defects
   7.6 Retests
8 Marking
9 Packing and dispatch
10 Storage
11 Disputes
Annex A (informative) Coating materials
Annex B (informative) Storage
Bibliography

This Standard is included in DIN Handbook 402 E. Gives information on the selection and ordering of continuously organic coated (coil coated) steel flat products and specifies appropriate technical requirements for the products, e.g. for test methods and tolerances on coating thickness, appearance, and product dimensions and shape.

DocumentType	Standard
Pages	21
PublisherName	German Institute for Standardisation (Deutsches Institut für Normung)
Status	Superseded

Standards	Relationship
NBN EN 10169-1 : 2004	Identical
UNE-EN 10169-1:2005	Identical
UNI EN 10169-1 : 2007	Identical
EN 10169-1:2003	Identical
I.S. EN 10169-1:2004	Identical
NEN EN 10169-1 : 2004	Identical
BS EN 10169-1:2003	Identical
NS EN 10169-1 : 2ED 2003	Identical
NF EN 10169-1 : 2004	Identical
SN EN 10169-1 : 2004	Identical

EN 10048:1996	Hot rolled narrow steel strip - Tolerances on dimensions and shape
EN 10051:2010	Continuously hot-rolled strip and plate/sheet cut from wide strip of non-alloy and alloy steels - Tolerances on dimensions and shape
EN 10169-3:2003	Continuously organic coated (coil coated) steel flat products - Part 3: Products for building interior applications
ENV 10169-2 : 1999	CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PRODUCTS FOR BUILDING EXTERIOR APPLICATIONS
EN 10140:2006	Cold rolled narrow steel strip - Tolerances on dimensions and shape
EN 10079:2007	Definition of steel products
EN 10027-2:2015	DESIGNATION SYSTEMS FOR STEELS - PART 2: NUMERICAL SYSTEM
EN 13523-14:2014	Coil coated metals - Test methods - Part 14: Chalking (Helmen method)
EN 10152:2017	Electrolytically zinc coated cold rolled steel flat products for cold forming - Technical delivery conditions
EN 13523-10:2017	Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV radiation and water condensation
EN 971-1 : 1996	PAINTS AND VARNISHES - TERMS AND DEFINITIONS FOR COATING MATERIALS - PART 1: GENERAL TERMS
EN ISO 1043-1:2011/A1:2016	PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 1: BASIC POLYMER AND THEIR SPECIAL CHARACTERISTICS (ISO 1043-1:2011/AMD 1:2016)
EN 13523-6:2002	Coil coated metals - Test methods - Part 6: Adhesion after indentation (cupping test)
EN 10268:2006+A1:2013	COLD ROLLED STEEL FLAT PRODUCTS WITH HIGH YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
EN 13523-9:2014	Coil coated metals - Test methods - Part 9: Resistance to water immersion
EN 13523-0:2014	Coil coated metals - Test methods - Part 0: General introduction
EN 10111:2008	Continuously hot rolled low carbon steel sheet and strip for cold forming - Technical delivery conditions
EN 13523-3:2014	Coil coated metals - Test methods - Part 3: Colour difference - Instrumental comparison
EN 10025:1990/A1:1993	HOT ROLLED PRODUCTS OF NON-ALLOY STRUCTURAL STEELS - TECHNICAL DELIVERY CONDITIONS
EN ISO 7253 : 2001	PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO NEUTRAL SALT SPRAY (FOG)
EN 10139:2016	Cold rolled uncoated low carbon steel narrow strip for cold forming - Technical delivery conditions
EN 10131:2006 (edition 2)	Cold rolled uncoated and zinc or zinc-nickel electrolytically coated low carbon and high yield strength steel flat products for cold forming - Tolerances on dimensions and shape
ENV 606 : DRAFT 1993	BAR CODED TRANSPORT AND HANDLING LABELS FOR STEEL PRODUCTS
PREN 13523-12 : DRAFT 2015	COIL COATED METALS - TEST METHODS - PART 12: RESISTANCE TO SCRATCHING
EN 13523-21:2017	Coil coated metals - Test methods - Part 21: Evaluation of outdoor exposed panels
EN 10143:2006 (edition 2)	Continuously hot-dip coated steel sheet and strip - Tolerances on dimensions and shape
EN 13523-22:2017	Coil coated metals - Test methods - Part 22: Colour difference - Visual comparison
EN 10021:2006	General technical delivery conditions for steel products
EN 10204:2004	Metallic products - Types of inspection documents
ISO 4997:2015	Cold-reduced carbon steel sheet of structural quality
EN 13523-5:2014	Coil coated metals - Test methods - Part 5: Resistance to rapid deformation (impact test)
EN 13523-8:2017	Coil coated metals - Test methods - Part 8: Resistance to salt spray (fog)
EN 10130:2006	Cold rolled low carbon steel flat products for cold forming - Technical delivery conditions
EN 10027-1:2016	Designation systems for steels - Part 1: Steel names
EN ISO 2815:2003	Paints and varnishes - Buchholz indentation test (ISO 2815:2003)
EN 13523-7:2014	Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)
EN 13523-1:2017	Coil coated metals - Test methods - Part 1: Film thickness
EN 10292:2007	Continuously hot-dip coated strip and sheet of steels with high yield strength for cold forming - Technical delivery conditions
EN 10020:2000	Definition and classification of grades of steel
EN 13523-4:2014	Coil coated metals - Test methods - Part 4: Pencil hardness
EN 13523-15:2015	Coil coated metals - Test methods - Part 15: Metamerism
EN 13523-2:2014	Coil coated metals - Test methods - Part 2: Gloss
CR 10260 : 1998	DESIGNATION SYSTEMS FOR STEEL - ADDITIONAL SYMBOLS