NON-ALLOY STEEL TUBES SUITABLE FOR WELDING AND THREADING - TECHNICAL DELIVERY CONDITIONS

Available format(s)

Hardcopy , PDF

Language(s)

German

Published date

01-01-2015

Publisher

German Institute for Standardisation (Deutsches Institut für Normung)

Vorwort
1 Anwendungsbereich
2 Normative Verweisungen
3 Begriffe
4 Einteilung und Bezeichnung
5 Bestellangaben
   5.1 Verbindliche Angaben
   5.2 Optionen
   5.3 Bestellbeispiele
6 Herstellverfahren
   6.1 Stahlherstellung
   6.2 Rohrherstellung
7 Lieferbedingungen
   7.1 Allgemeines
   7.2 Alternative Beschaffenheit und Schutz
        der Rohrenden
   7.3 Eignung zum Schmelztauchverzinken
   7.4 Schmelztauchverzinkte Ausführung
8 Anforderungen
   8.1 Allgemeines
   8.2 Chemische Zusammensetzung und
        mechanische Eigenschaften
   8.3 Oberflächenbeschaffenheit
   8.4 Masse, Masse und Grenzabmasse
   8.5 Dichtheit
   8.6 Gefährliche Stoffe
   8.7 Brandverhalten
9 Prüfung
   9.1 Allgemeines
   9.2 Prüfbescheinigungen
   9.3 Zugversuch
   9.4 Biegeversuch
   9.5 Ringfaltversuch
   9.6 Dichtheitsprüfung
   9.7 Masskontrolle
   9.8 Sichtprüfung
10 Kennzeichnung
11 Temporärer Oberflächenschutz
12 Konformitätsbe
   12.1 Allgemeines
   12.2 Erstprüfung (ITT)
   12.3 Werkseigene Produktionskontrolle (WPK)
Anhang A (informativ) Zusammenhang zwischen
          Nennaussendurchmesser, Gewindegrösse und
          Nennweite
Anhang B (normativ) Rohrarten mit Wanddicken, die
          von den entsprechenden Werten für die mittlere
          und schwere Reihe abweichen
Anhang ZA (informativ) Abschnitte in dieser
          Europäischen Norm, die Bestimmungen der
          EG-Bauproduktenrichtlinie
          für die Anwendung des Mandats M 131 betreffen

This standard is included in DIN Handbook 15, 15-1, 62-1, 91, 403/1 and 403. Describes the requirements for circular non-alloy steel tubes suitable for welding and threading and provides a number of options for the finish of tube ends and coatings.

DevelopmentNote	Supersedes DIN 2440, and DIN 2441 (11/2004) DRAFT 2015 issued in May 2015. (05/2015)
DocumentType	Draft
Pages	69
PublisherName	German Institute for Standardisation (Deutsches Institut für Normung)
Status	Current

Standards	Relationship
UNI EN 10255 : 2007	Identical
UNE-EN 10255:2005	Identical
SN EN 10255 : 2004 + A1 2007	Identical
NF EN 10255 : 2005 + A1 2007	Identical
BS EN 10255:2004	Identical
NS EN 10255 : 2004 + A1 2007	Identical
NEN EN 10255 : 2004 + A1 2007	Identical
EN 10255:2004+A1:2007	Identical
NBN EN 10255 : 2004 + A1 2007	Identical
I.S. EN 10255:2004	Identical
PREN 10255 : DRAFT 2010	Identical

DIN 18302:2016-09	GERMAN CONSTRUCTION CONTRACT PROCEDURES (VOB) - PART C: GENERAL TECHNICAL SPECIFICATIONS IN CONSTRUCTION CONTRACTS (ATV) - BOREHOLE SINKING OPERATIONS
DIN V 4108-4:2007-06	THERMAL INSULATION AND ENERGY ECONOMY IN BUILDINGS - PART 4: HYGROTHERMAL DESIGN VALUES
DIN 14462:2012-09	Water conduit for fire extinguishing - Planning, installation, operation and maintenance of fire hose systems and pillar fire hydrant and underground fire systems
DIN 4108-4:2016-07 (Draft)	THERMAL INSULATION AND ENERGY ECONOMY IN BUILDINGS - PART 4: HYGROTHERMAL DESIGN VALUES
DIN 1988-200:2012-05	Codes of practice for drinking water installations - Part 200: Installation Type A (closed system) - Planning, components, apparatus, materials; DVGW code of practice
VDI 3805 Blatt 17:2016-01	Product data exchange in the building services - Drinking water system assemblies
VDI 2050 Blatt 1.1:2017-07	Requirements for technical equipment rooms - Space for service shafts
VDI 3805 Blatt 18:2013-09	Product data exchange in the building services - Panel heating/cooling
VDI 3805 Blatt 2:2016-01	Product data exchange in the building services - Heating value assemblies
VDI 3805 Blatt 32:2013-11	Product data exchange in the building services - Distributors/collectors
DIN 1988-600:2010-12	Codes of practice for drinking water installations - Part 600: Drinking water installations in connection with fire fighting and fire protection installations; DVGW code of practice
DIN 3387-1:2008-11	Separable unthreaded pipe connections for metal gas pipes - Part 1: Connections for pipes with smooth ends
DIN HDBK 15-1 : 11ED 2009
DIN EN ISO 3822-1:2009-07	Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 1: Method of measurement (ISO 3822-1:1999+Amd. 1:2008) (includes Amendment A1:2008)
DIN 30690-1:2016-04	CONSTRUCTION ELEMENTS IN THE GAS SUPPLY SYSTEM - PART 1: REQUIREMENTS FOR CONSTRUCTION ELEMENTS IN GAS SUPPLY SYSTEMS
DIN 4102-4:2016-05	FIRE BEHAVIOUR OF BUILDING MATERIALS AND BUILDING COMPONENTS - PART 4: SYNOPSIS AND APPLICATION OF CLASSIFIED BUILDING MATERIALS, COMPONENTS AND SPECIAL COMPONENTS

EN 10240:1997	Internal and/or external protective coatings for steel tubes - Specification for hot dip galvanized coatings applied in automatic plants
EN 10002-1 : 2001	METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE
EN 10246-1:1996	Non destructive testing of steel tubes - Part 1: Automatic electromagnetic testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for verification of hydraulic leak-tightness
EN 10226-2:2005	Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation
EN 10027-2:2015	DESIGNATION SYSTEMS FOR STEELS - PART 2: NUMERICAL SYSTEM
ISO 8491:1998	Metallic materials Tube (in full section) Bend test
EN ISO 1461:2009	Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:2009)
ISO 1461:2009	Hot dip galvanized coatings on fabricated iron and steel articles — Specifications and test methods
EN ISO 2566-1:1999	Steel - Conversion of elongation values - Part 1: Carbon and low alloy steels (ISO 2566-1:1984)
EN ISO 9001:2015	Quality management systems - Requirements (ISO 9001:2015)
EN 10021:2006	General technical delivery conditions for steel products
ISO 2566-1:1984	Steel Conversion of elongation values Part 1: Carbon and low alloy steels
EN 10241:2000	Steel threaded pipe fittings
EN 10204:2004	Metallic products - Types of inspection documents
ISO 9001:2015	Quality management systems — Requirements
EN 10027-1:2016	Designation systems for steels - Part 1: Steel names
EN ISO 8491:2004	Metallic materials - Tube (in full section) - Bend test (ISO 8491:1998)
ISO 8492:2013	Metallic materials Tube Flattening test
EN 10020:2000	Definition and classification of grades of steel
EN ISO 8492:2013	Metallic materials - Tube - Flattening test (ISO 8492:2013)
EN 10266:2003	Steel tubes, fittings and structural hollow sections - Symbols and definitions of terms for use in product standards
EN 10242:1994/A2:2003	THREADED PIPE FITTING IN MALLEABLE CAST IRON
EN 10226-1:2004	Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation

View more information

US$94.05

Excluding Tax where applicable

Product format

I agree to the DRM document license rules apply against the PDF selection made.

Please confirm that you agree to the document license rules for this document.

I agree to the document license rules .

Please confirm that you agree to the document license rules for this document.

Access your standards online with a subscription

Features

Simple online access to standards, technical information and regulations.
Critical updates of standards and customisable alerts and notifications.
Multi-user online standards collection: secure, flexible and cost effective.

Learn more on subscription solutions

Get in touch with us

Log into your Account

DIN EN 10255:2015-05 (Draft)

Current

Table of Contents

Abstract

General Product Information

International Equivalents

Standards Referenced By This Book

Standards Referencing This Book

Category

Subcategory

Access your standards online with a subscription