DIN EN 12341:2014-08
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Ambient air - Standard gravimetric measurement method for the determination of the PM or PM mass concentration of suspended particulate matter
Available format(s)
Hardcopy , PDF
Superseded date
10-01-2023
Language(s)
German, English
Published date
08-01-2014
National foreword
National Annex NA (informative) - Bibliography
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions, symbols and abbreviations
4 Principle
5 Equipment and facilities
6 Filter conditioning, sampling and weighing
procedures
7 Ongoing quality control
8 Expression of results
9 Performance characteristics of the method
Annex A (normative) - Design drawing of standard
inlet for the sampling of PM[10] and PM[2],[5]
Annex B (normative) - Other samplers
Annex C (informative) - Scheme of PM standard sampler
Annex D (informative) - Suitability tests for filters
Annex E (normative) - Initial suitability testing of
weighing facilities
Annex F (informative) - Results of experimental work
Annex G (informative) - Impactor efficiency
Bibliography
Defines a standard method for determining the PM[10] or PM[2],[5] mass concentrations of suspended particulate matter in ambient air by sampling the particulate matter on filters and weighing them by means of a balance.
| DevelopmentNote |
Supersedes DIN EN 14907. (08/2014)
|
| DocumentType |
Standard
|
| Pages |
57
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| ONORM EN 12341 : 2014 | Identical |
| NS EN 12341 : 2014 | Identical |
| UNI EN 12341 : 2014 | Identical |
| UNE-EN 12341:2015 | Identical |
| NEN EN 12341 : 2014 | Identical |
| NF EN 12341 : 2014 | Identical |
| BS EN 12341:2014 | Identical |
| NBN EN 12341 : 2014 | Identical |
| SN EN 12341:2014 | Identical |
| I.S. EN 12341:2014 | Identical |
| EN 12341:2014 | Identical |
| VDI 3803 Blatt 4:2012-09 | Air-conditioning, system requirements - Air filter systems (VDI Ventilation Code of Practice) |
| VDI 3787 Blatt 1:2015-09 | Environmental meteorology - Climate and air pollution maps for cities and regions |
| VDI 4280 Blatt 2:2000-12 | Planning of ambient air quality measurements - Rules for planning investigations of traffic related air pollutants in key pollution areas |
| VDI 4300 Blatt 11:2013-12 | Measurement of indoor air pollution - Measurement strategies for determination of airborne particles in indoor environment - PM-fraction |
| VDI 2267 Blatt 1:2012-10 | Determination of suspended matter in ambient air - Measurement of the element concentration after sampling on filters - Determination of Al, As, Ba, Ca, Cd, Co, Cr, Cu, Fe, K, Mg, Mn, Na, Ni, Pb, Sb, Se, Sn, Tl, V and Zn by graphite furnace atomic absorption spectrometry (GF-AAS), by optical emission spectrometry with inductively coupled plasma (ICP-OES) and inductively coupled plasma mass spectrometry (ICP-MS) |
| VDI 2267 Blatt 12:2008-10 | Determination of suspended matter in ambient air - Measurement of As, Ca, Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb, Sb and Zn by energy dispersive X-ray fluorescense (ED XRF) |
| VDI 3871:2016-12 (Draft) | Measurement of particles in ambient air - Electrical aerosol monitors based on diffusion charging |
| VDI 2463 Blatt 7:2014-05 | Particulate matter measurement - Determination of suspended particulate matter and gaseous chemical compounds in ambient air and indoor air - Active sampling via low-volume sampler (LVS) |
| VDI 3787 Blatt 9:2004-12 | Environmental meteorology - Provision for climate and air quality in regional planning |
| VDI 2095 Blatt 1:2011-03 | Emission control - Treatment of mineral construction-site and demolition waste - Stationary and mobile demolition waste recycling facilities |
| VDI 3790 Blatt 3:2010-01 | Environmental meteorology - Emission of gases, odours and dusts from diffuse sources - Storage, transhipment and transportation of bulk materials |
| VDI 2465 Blatt 2:2016-11 | Measurement of soot (ambient air) - Thermographic determination of elemental carbon after thermal desorption of organic carbon |
| VDI 2267 Blatt 3:2015-03 | Determination of suspended matter in ambient air - Digestion variants for dust samples for the subsequent determination of the mass concentration of Al, Sb, As, Pb, Cd, Ca, Cr, Co, Fe, K, Cu, Mg, Mn, Na, Ni, Se, V and Zn |
| VDI 2119:2013-06 | Ambient air measurements - Sampling of atmospheric particles > 2,5 ?m on an acceptor surface using the Sigma-2 passive sampler - Characterisation by optical microscopy and calculation of number settling rate and mass concentration |
| DIN EN 16909:2015-10 (Draft) | AMBIENT AIR - MEASUREMENT OF ELEMENTAL CARBON (EC) AND ORGANIC CARBON (OC) COLLECTED ON FILTERS |
| DIN EN 16913:2015-10 (Draft) | AMBIENT AIR - STANDARD METHOD FOR MEASUREMENT OF NO[3][-], SO[4][2-], CL[-], NH[4][+], NA[+], K[+], MG[2+], CA[2+] IN PM2,5 AS DEPOSITED ON FILTERS |
| VDI 2268 Blatt 3:1988-12 | Chemical analysis of particulate matter; determination of thallium in particulate emissions by atomic absorption spectrometry |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| EN 13274-7:2008 | Respiratory protective devices - Methods of test - Part 7: Determination of particle filter penetration |
| DIN EN 15841:2010-04 | Ambient air quality - Standard method for determination of arsenic, cadmium, lead and nickel in atmospheric deposition |
| VDI 2267 Blatt 12:2008-10 | Determination of suspended matter in ambient air - Measurement of As, Ca, Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb, Sb and Zn by energy dispersive X-ray fluorescense (ED XRF) |
| CEN/TR 16269:2011 | Ambient air - Guide for the measurement of anions and cations in PM2,5 |
| DIN EN 15853:2010-11 | Ambient air quality - Standard method for the determination of mercury deposition |
| VDI 2267 Blatt 5:1997-11 | Determination of suspended matter in ambient air - Determination of the mass concentration of Be, Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb, Sb, V, Zn by optical emission spectrometry (ICP-OES) after sampling on filters and digestion in an oxidising agent |
| VDI 2463 Blatt 7:2014-05 | Particulate matter measurement - Determination of suspended particulate matter and gaseous chemical compounds in ambient air and indoor air - Active sampling via low-volume sampler (LVS) |
| EN 14907:2005 | Ambient air quality - Standard gravimetric measurement method for the determination of the PM2,5 mass fraction of suspended particulate matter |
| VDI 3498 Blatt 2:2002-07 | Ambient air measurement - Indoor air measurement - Measurement of polychlorinated dibenzo-p-dioxins and dibenzofurans; Method using small filters |
| DIN EN 15980:2011-08 | Air quality - Determination of the deposition of benz[a]anthracene, benzo[b]fluoranthene, benzo[j]fluoranthene, benzo[k]fluoranthene, benzo[a]pyrene, dibenz[a,h]anthracene and indeno[1,2,3-cd]pyrene |
| CEN/TR 16243:2011 | Ambient air quality - Guide for the measurement of elemental carbon (EC) and organic carbon (OC) deposited on filters |
| EN 14902:2005/AC:2006 | AMBIENT AIR QUALITY - STANDARD METHOD FOR THE MEASUREMENT OF PB, CD, AS AND NI IN THE PM10 FRACTION OF SUSPENDED PARTICULATE MATTER |
| VDI 2463 Blatt 11:1996-10 | Particulate matter measurement - Measurement of mass concentration in ambient air - Filter method; Digitel DHA-80 filter changer |
| VDI 2267 Blatt 16:2007-07 | Determination of suspended matter in ambient air - Measurement of the mass concentration of As, Cd, Co, Cr, Cu, Ni, Pb, Sb, V und Zn as part of dust precipitation by atomic absorption spectrometry (AAS) |
| CEN/TS 16450:2013 | Ambient air - Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2,5) |
| VDI 3867 Blatt 6:2012-12 | Measurement of particles in ambient air - Determination of the particle number concentration and number size distribution of aerosols - Electrical Low Pressure Impactor (ELPI) |
| VDI 2464 Blatt 3:2012-07 | Ambient air measurement - Indoor air measurement - Measurement of polybrominated diphenylether, hexabromocyclododecane and hexabromobenzene by GC/MS |
| VDI 3867 Blatt 5:2013-11 | Measurement of particles in ambient air - Determination of the particle number concentration and particle size distribution of aerosols - Time-of-flight spectrometer |
| VDI 2267 Blatt 15:2005-11 | Determination of suspended matter in ambient air - Measurement of the mass concentration of Al, As, Ca, Cd, Co, Cr, Cu, K, Mn, Ni, Pb, Sb, V, Zn as part of dust precipitation by mass spectrometry (ICP-MS) |
| VDI 2267 Blatt 7:1988-11 | Chemical analysis of particulates in ambient air; determination of thallium and its inorganic compounds as part of the dust precipitation by atomic absorption spectrometry |
| VDI 3867 Blatt 3:2012-08 | Measurement of particles in ambient air - Determination of the particle number concentration and number size distribution of aerosols - Electrical mobility spectrometer |
| VDI 2268 Blatt 1:1987-04 | Chemical analysis of particulate matter; determination of Ba, Be, Cd, Co, Cr, Cu, Ni, Pb, Sr, V, Zn in particulate emissions by atomic spectrometric methods |
| VDI 2267 Blatt 9:2002-07 | Determination of suspended particulates matter in ambient air - Measurement of the mass concentration of mercury - Sampling by sorption as amalgam and determination by atomic fluorescense spectrometry (AFS) with cold vapour technique |
| EN 1822-1:2009 | High efficiency air filters (EPA, HEPA and ULPA) - Part 1: Classification, performance testing, marking |
| VDI 3867 Blatt 2:2008-02 | Measurement of particulate matter in ambient air - Methods for characterizing test aerosols - Determination of the particle number concentration and particle size distribution - Condensation Particle Counter (CPC) |
| DIN EN 15852:2010-11 | Ambient air quality - Standard method for the determination of total gaseous mercury |
| EN 15549:2008 | Air quality - Standard method for the measurement of the concentration of benzo[a]pyrene in ambient air |
| VDI 3867 Blatt 4:2011-06 | Measurement of particles in ambient air - Determination of the particle number concentration and particle size distribution of aerosols - Optical aerosol spectrometer |
| DIN EN 14902:2005-10 | AMBIENT AIR QUALITY - STANDARD METHOD FOR THE MEASUREMENT OF PB, CD, AS AND NI IN THE PM10 FRACTION OF SUSPENDED PARTICULATE MATTER |
| VDI 2267 Blatt 1:2012-10 | Determination of suspended matter in ambient air - Measurement of the element concentration after sampling on filters - Determination of Al, As, Ba, Ca, Cd, Co, Cr, Cu, Fe, K, Mg, Mn, Na, Ni, Pb, Sb, Se, Sn, Tl, V and Zn by graphite furnace atomic absorption spectrometry (GF-AAS), by optical emission spectrometry with inductively coupled plasma (ICP-OES) and inductively coupled plasma mass spectrometry (ICP-MS) |
| DIN ISO 11057:2012-05 | Air quality - Test method for filtration characterization of cleanable filter media (ISO 11057:2011) |
| EN 12341:2014 | Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter |
| VDI 2267 Blatt 14:2003-12 | Determination of suspended matter in ambient air - Measurement of Al, As, Ca, Cd, Co, Cr, Cu, Fe, K, Mg, Mn, Na, Ni, Pb, V, Zn as part of dust deposition by optical emission spectrometry (ICP OES) |
| VDI 3498 Blatt 1:2002-07 | Ambient air measurement - Indoor air measurement - Measurement of polychlorinated dibenzo-p-dioxins and dibenzofurans; Method using large filters |
| VDI 2267 Blatt 2:1983-02 | Determination of suspended particulates in ambient air; measurement of lead by X-ray fluorescence |
US$149.99
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - German
PDF - German
Hardcopy - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.