DIN EN 12420:2014-09
Current
The latest, up-to-date edition.
Hardcopy , PDF
German
09-01-2014
Nationales Vorwort
Vorwort
Einleitung
1 Anwendungsbereich
2 Normative Verweisungen
3 Begriffe
4 Bezeichnungen
5 Bestellangaben
6 Anforderungen
7 Probenentnahme
8 Prüfverfahren
9 Konformitätserklärung und Prüfbescheinigung
10 Kennzeichnung, Etikettierung, Verpackung
Anhang A (informativ) - Empfohlene Konstruktionsleitfäden
Anhang B (informativ) - Zugeigenschaften
Anhang ZA (informativ) - Zusammenhang zwischen dieser
Europäischen Norm und den grundlegenden
Anforderungen der EU-Richtlinie 97/23/EG über
Druckgeräte (DGRL)
Literaturhinweise
This standard is included in DIN Handbook 456/3.
Committee |
TC 133
|
DevelopmentNote |
Supersedes DIN 17673-1, DIN 17673-2, DIN 17673-3, DIN 17673-4, DIN 17678-1, DIN 17678-2, DIN 17678-3, DIN 17678-4 and DIN 17933-70 (09/1999)
|
DocumentType |
Standard
|
Pages |
61
|
PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
Status |
Current
|
Supersedes |
Standards | Relationship |
UNI EN 12420 : 2014 | Identical |
EN 12420:2014 | Identical |
NS EN 12420 : 2014 | Identical |
UNE-EN 12420:2015 | Identical |
NBN EN 12420 : 2014 | Identical |
I.S. EN 12420:2014 | Identical |
SN EN 12420:2014 | Identical |
NEN EN 12420 : 2014 | Identical |
NF EN 12420 : 2014 | Identical |
BS EN 12420:2014 | Identical |
DKI I 008 : 2012 | |
BWB TL 4210-0028 : 4ED 2000 | FOAM PROPORTIONER, 200 L/MIN AND 400 L/MIN |
DIN 14461-3:2016-10 | DELIVERY VALVE INSTALLATIONS FOR FIREFIGHTING PURPOSES - PART 3: FIRE HOSE VALVES FOR NOMINAL PRESSURE PN 16 |
DIN 16272:2004-07 | PN 250 and PN 400 valves with shut-off test connection for pressure gauges |
DIN HDBK 456/3 : 2ED 2015 | KUPFER 3 - STANGEN, DRAEHTE, PROFILE, GUSSSTUECKE UND SCHMIEDESTUECKE |
DIN 16263:2004-07 | PN 16 cocks with adjusting nut and male connection and test connection for pressure gauges |
BWB TL 8345-0047 : 1ED 2006 | |
DIN 16262:2004-07 | PN 6 and PN 16 cocks with adjusting nut and male connection for pressure gauges |
DIN 3387-1:2008-11 | Separable unthreaded pipe connections for metal gas pipes - Part 1: Connections for pipes with smooth ends |
DIN 3509:2010-06 | Valves for potable water supply in buildings - Draw-off taps (PN 10) - Requirements and tests |
DIN 3859-1:2005-09 | Compression couplings - Part 1: Technical delivery conditions |
DIN HDBK 457 : 2ED 2004 | KUPFER 2 - STANGEN, DRAEHTE, PROFILE, GUSSSTUECKE UND SCHMIEDESTUECKE |
BWB TL 4730-0037 : 1ED 2006 | |
DIN 86211:2011-02 | Fire valves for PN 16 with fire hose couplings Type C or Type B and with flange connection |
DIN 16271:2004-07 | PN 250 and PN 400 valves with test connection for pressure gauges |
DIN 16270:2004-07 | PN 250 and PN 400 valves without test connection for pressure gauges |
DIN 14303:2013-02 | Aluminium alloy delivery coupling type B with nominal pressure PN 16 |
DIN 81249-2:2013-05 | CORROSION OF METALS IN SEA WATER AND SEA ATMOSPHERE - PART 2: FREE CORROSION IN SEA WATER |
EN 1655:1997 | Copper and copper alloys - Declarations of conformity |
EN 14977:2006 | Copper and copper alloys - Detection of tensile stress - 5 % ammonia test |
EN ISO 6506-1:2014 | Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014) |
ISO 6506-1:2014 | Metallic materials Brinell hardness test Part 1: Test method |
EN ISO 80000-1:2013 | Quantities and units - Part 1: General (ISO 80000-1:2009 + Cor 1:2011) |
EN 1412:2016 | Copper and copper alloys - European numbering system |
EN ISO 1101:2017 | Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2017) |
ISO 1190-1:1982 | Copper and copper alloys Code of designation Part 1: Designation of materials |
ISO 1101:2017 | Geometrical product specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out |
ISO 1811-2:1988 | Copper and copper alloys Selection and preparation of samples for chemical analysis Part 2: Sampling of wrought products and castings |
EN 1976:2012 | Copper and copper alloys - Cast unwrought copper products |
EN 1173:2008 | Copper and copper alloys - Material condition designation |
EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
EN 10204:2004 | Metallic products - Types of inspection documents |
ISO 80000-1:2009 | Quantities and units — Part 1: General |
ISO 6509:1981 | Corrosion of metals and alloys Determination of dezincification resistance of brass |
ISO 9001:2015 | Quality management systems — Requirements |
EN ISO 6509 : 1995 | CORROSION OF METALS AND ALLOYS - DETERMINATION OF DEZINCIFICATION RESISTANCE OF BRASS |
ISO 6957:1988 | Copper alloys Ammonia test for stress corrosion resistance |
1997/23/EC : 1997 | DIRECTIVE 97/23/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 29 MAY 1997 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING PRESSURE EQUIPMENT |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.