DIN EN 12622 E : 2014

Current

Current The latest, up-to-date edition.

SAFETY OF MACHINE TOOLS - HYDRAULIC PRESS BRAKES

Publisher: German Institute for Standardisation (Deutsches Institut für Normung)

Published:

Available Formats: PDF - English, Hardcopy - English
More Info on product formats

Table of Contents - (Show below) - (Hide below)

National foreword
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviations
4 List of significant hazards
5 Safety requirements and/or measures
6 Verification of the safety requirements and/or
  protective measures
7 Information for use
Annex A (normative) - Calculation of minimum
         safety distances
Annex B (normative) - The overall response time
         of the press brake stopping performance
Annex C (informative) - Example of redundant and
         monitored hydraulic control circuits for a
         down-stroking press brake
Annex D (normative) - Conditions for noise
         measurement of press brakes
Annex E (informative) - Side safeguarding for
         manually fed press brakes
Annex F (informative) - Markings
Annex G (normative) - Laser actuated AOPD system
         tests
Annex H (informative) - Bending speed
Annex ZA (informative) - Relationship between this
         European Standard and the Essential
         Requirements of EU Directive 2006/42
Bibliography

Abstract - (Show below) - (Hide below)

Describes technical safety requirements and protective measures to be adopted by persons undertaking the design, manufacture and supply of hydraulic press brakes which are designed to work cold metal or material partly of metal and hereafter referred to as machines.

General Product Information - (Show below) - (Hide below)

Published
Document Type	Standard
Status	Current
Publisher	German Institute for Standardisation (Deutsches Institut für Normung)
Pages
ISBN

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
SN EN 12622 : 2010 + A1 2013	Identical
UNI EN 12622 : 2014	Identical
NS EN 12622 : 2009 + A1 2013	Identical
BS EN 12622 : 2009	Identical
NF EN 12622 : 2010 + A1 2013	Identical
NBN EN 12622 : 2010 + A1 2013	Identical
NEN EN 12622 : 2009 + A1 2013	Identical
EN 12622 : 2009 + A1 2013	Identical
UNE EN 12622 : 2011	Identical
I.S. EN 12622:2009	Identical

Standards Referencing This Book - (Show below) - (Hide below)

EN 1005-4 : 2005 + A1 2008	SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 4: EVALUATION OF WORKING POSTURES AND MOVEMENTS IN RELATION TO MACHINERY
ISO 11202 : 2010(R2015)	ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS APPLYING APPROXIMATE ENVIRONMENTAL CORRECTIONS
ISO 7010 : 2011	GRAPHICAL SYMBOLS - SAFETY COLOURS AND SAFETY SIGNS - REGISTERED SAFETY SIGNS
EN 894-3 : 2000 + A1 2008	SAFETY OF MACHINERY - ERGONOMICS REQUIREMENTS FOR THE DESIGN OF DISPLAYS AND CONTROL ACTUATORS - PART 3: CONTROL ACTUATORS
EN 12464-1 : 2011	LIGHT AND LIGHTING - LIGHTING OF WORK PLACES - PART 1: INDOOR WORK PLACES
EN 982 : 96 + A1 2008	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - HYDRAULICS
ISO 4871 : 1996(R2013)	ACOUSTICS - DECLARATION AND VERIFICATION OF NOISE EMISSION VALUES OF MACHINERY AND EQUIPMENT
EN 1037 : 1995 + A1 2008	SAFETY OF MACHINERY - PREVENTION OF UNEXPECTED START-UP
ISO 14122-3 : 2016	SAFETY OF MACHINERY - PERMANENT MEANS OF ACCESS TO MACHINERY - PART 3: STAIRS, STEPLADDERS AND GUARD-RAILS
ISO 3744:2010	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR AN ESSENTIALLY FREE FIELD OVER A REFLECTING PLANE
ISO 14122-1 : 2016	SAFETY OF MACHINERY - PERMANENT MEANS OF ACCESS TO MACHINERY - PART 1: CHOICE OF FIXED MEANS AND GENERAL REQUIREMENTS OF ACCESS
ISO 11161 : 2007(R2015)	SAFETY OF MACHINERY - INTEGRATED MANUFACTURING SYSTEMS - BASIC REQUIREMENTS
EN 60825-1 : 2014 COR 2017	SAFETY OF LASER PRODUCTS - PART 1: EQUIPMENT CLASSIFICATION AND REQUIREMENTS (IEC 60825-1:2014)
EN 61508-1 : 2010	FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 1: GENERAL REQUIREMENTS
EN 1088 : 1995 + A2 2008	SAFETY OF MACHINERY - INTERLOCKING DEVICES ASSOCIATED WITH GUARDS - PRINCIPLES FOR DESIGN AND SELECTION
CLC/TS 61496-2 : 2006	SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 2: PARTICULAR REQUIREMENTS FOR EQUIPMENT USING ACTIVE OPTO-ELECTRONIC PROTECTIVE DEVICES (AOPDS)
IEC 61310-2 : 2.0	SAFETY OF MACHINERY - INDICATION, MARKING AND ACTUATION - PART 2: REQUIREMENTS FOR MARKING
ISO TR 11688-1 : 1995(R2009)	ACOUSTICS - RECOMMENDED PRACTICE FOR THE DESIGN OF LOW-NOISE MACHINERY AND EQUIPMENT - PART 1: PLANNING
EN 894-2 : 1997 + A1 2008	SAFETY OF MACHINERY - ERGONOMICS REQUIREMENTS FOR THE DESIGN OF DISPLAYS AND CONTROL ACTUATORS - PART 2: DISPLAYS
EN 61310-2 : 2008	SAFETY OF MACHINERY - INDICATION, MARKING AND ACTUATION - PART 2: REQUIREMENTS FOR MARKING
ISO 13732-1 : 2006(R2010)	ERGONOMICS OF THE THERMAL ENVIRONMENT - METHODS FOR THE ASSESSMENT OF HUMAN RESPONSES TO CONTACT WITH SURFACES - PART 1: HOT SURFACES
EN 50370-2 : 2003	ELECTROMAGNETIC COMPATIBILITY (EMC) - PRODUCT FAMILY STANDARD FOR MACHINE TOOLS - PART 2: IMMUNITY
EN ISO 14121-1 : 2007	SAFETY OF MACHINERY - RISK ASSESSMENT - PART 1: PRINCIPLES
EN 1837 : 1999 + A1 2009	SAFETY OF MACHINERY - INTEGRAL LIGHTING OF MACHINES
EN 999 : 1998 + A1 2008	SAFETY OF MACHINERY - THE POSITIONING OF PROTECTIVE EQUIPMENT IN RESPECT OF APPROACH SPEEDS OF PARTS OF THE HUMAN BODY
EN 349 : 1993 + A1 2008	SAFETY OF MACHINERY - MINIMUM GAPS TO AVOID CRUSHING OF PARTS OF THE HUMAN BODY
IEC 60204-1 : 6.0	SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
ISO 14738 : 2002(R2013)	SAFETY OF MACHINERY - ANTHROPOMETRIC REQUIREMENTS FOR THE DESIGN OF WORKSTATIONS AT MACHINERY
EN ISO 13850 : 2015	SAFETY OF MACHINERY - EMERGENCY STOP FUNCTION - PRINCIPLES FOR DESIGN (ISO 13850:2015)
EN 1005-1 : 2001 + A1 2008	SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 1: TERMS AND DEFINITIONS
IEC 60947-5-3 : 2.0	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-3: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - REQUIREMENTS FOR PROXIMITY DEVICES WITH DEFINED BEHAVIOUR UNDER FAULT CONDITIONS (PDDB)
EN 1005-2 : 2003 + A1 2008	SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 2: MANUAL HANDLING OF MACHINERY AND COMPONENT PARTS OF MACHINERY
IEC 60947-5-1 : 4.0	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-1: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTROMECHANICAL CONTROL CIRCUIT DEVICES
IEC 60825-1 : 3.0	SAFETY OF LASER PRODUCTS - PART 1: EQUIPMENT CLASSIFICATION AND REQUIREMENTS
IEC 61508-4 : 2.0	FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 4: DEFINITIONS AND ABBREVIATIONS
EN 614-1 : 2006 + A1 2009	SAFETY OF MACHINERY - ERGONOMIC DESIGN PRINCIPLES - PART 1: TERMINOLOGY AND GENERAL PRINCIPLES
EN ISO 13857 : 2008	SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT HAZARD ZONES BEING REACHED BY UPPER AND LOWER LIMBS
EN ISO 11688-2 : 2000	ACOUSTICS - RECOMMENDED PRACTICE FOR THE DESIGN OF LOW-NOISE MACHINERY AND EQUIPMENT - PART 2: INTRODUCTION TO THE PHYSICS OF LOW-NOISE DESIGN
ISO 14122-4 : 2016	SAFETY OF MACHINERY - PERMANENT MEANS OF ACCESS TO MACHINERY - PART 4: FIXED LADDERS
ISO 14121-1 : 2007	SAFETY OF MACHINERY - RISK ASSESSMENT - PART 1: PRINCIPLES
EN 574 : 1996 + A1 2008	SAFETY OF MACHINERY - TWO-HAND CONTROL DEVICES - FUNCTIONAL ASPECTS - PRINCIPLES FOR DESIGN
EN ISO 13732-1 : 2008	ERGONOMICS OF THE THERMAL ENVIRONMENT - METHODS FOR THE ASSESSMENT OF HUMAN RESPONSES TO CONTACT WITH SURFACES - PART 1: HOT SURFACES
EN 60947-3 : 2009 AMD 2 2015	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 3: SWITCHES, DISCONNECTORS, SWITCH-DISCONNECTORS AND FUSE-COMBINATION UNITS (IEC 60947-3:2008/A2:2015)
EN ISO 11161 : 2007 AMD 1 2010	SAFETY OF MACHINERY - INTEGRATED MANUFACTURING SYSTEMS - BASIC REQUIREMENTS
ISO 3746 : 2010(R2015)	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - SURVEY METHOD USING AN ENVELOPING MEASUREMENT SURFACE OVER A REFLECTING PLANE
EN ISO 12100-1 : 2003 AMD 1 2009	SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY
CLC/TS 61496-3 : 2008	SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 3: PARTICULAR REQUIREMENTS FOR ACTIVE OPTO-ELECTRONIC PROTECTIVE DEVICES RESPONSIVE TO DIFFUSE REFLECTION (AOPDDR)
EN ISO 14122-3 : 2016	SAFETY OF MACHINERY - PERMANENT MEANS OF ACCESS TO MACHINERY - PART 3: STAIRS, STEPLADDERS AND GUARD-RAILS (ISO 14122-3:2016)
EN ISO 3746 : 2010	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - SURVEY METHOD USING AN ENVELOPING MEASUREMENT SURFACE OVER A REFLECTING PLANE
EN 61496-1 : 2013 COR 2015	SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 1: GENERAL REQUIREMENTS AND TESTS (IEC 61496-1:2012)
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV	DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE)
EN ISO 3744 : 2010	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR AN ESSENTIALLY FREE FIELD OVER A REFLECTING PLANE
EN 953 : 1997 + A1 2009	SAFETY OF MACHINERY - GUARDS - GENERAL REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF FIXED AND MOVABLE GUARDS
EN 842 : 1996 + A1 2008	SAFETY OF MACHINERY - VISUAL DANGER SIGNALS - GENERAL REQUIREMENTS, DESIGN AND TESTING
EN ISO 14122-4 : 2016	SAFETY OF MACHINERY - PERMANENT MEANS OF ACCESS TO MACHINERY - PART 4: FIXED LADDERS (ISO 14122-4:2016)
EN 62061 : 2005 AMD 2 2015	SAFETY OF MACHINERY - FUNCTIONAL SAFETY OF SAFETY-RELATED ELECTRICAL, ELECTRONIC AND PROGRAMMABLE ELECTRONIC CONTROL SYSTEMS (IEC 62061:2005/A2:2015)
EN ISO 14122-2 : 2016	SAFETY OF MACHINERY - PERMANENT MEANS OF ACCESS TO MACHINERY - PART 2: WORKING PLATFORMS AND WALKWAYS (ISO 14122-2:2016)
ISO 13849-2 : 2012(R2018)	SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: VALIDATION
ISO 12100-2 : 2003	SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES
ISO 13857 : 2008(R2011)	SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT HAZARD ZONES BEING REACHED BY UPPER AND LOWER LIMBS
EN ISO 12100-2 : 2003 AMD 1 2009	SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES
IEC 61496-1 : 3.0	SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 1: GENERAL REQUIREMENTS AND TESTS
EN ISO 13849-2 : 2012	SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: VALIDATION (ISO 13849-2:2012)
EN 983 : 1996 + A1 2008	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - PNEUMATICS
EN 954-1 : 1996	SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN
ISO 12100-1 : 2003	SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY
EN ISO 13849-1 : 2015	SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN (ISO 13849-1:2015)
ISO 13850 : 2015	SAFETY OF MACHINERY - EMERGENCY STOP FUNCTION - PRINCIPLES FOR DESIGN
EN ISO 4871 : 2009	ACOUSTICS - DECLARATION AND VERIFICATION OF NOISE EMISSION VALUES OF MACHINERY AND EQUIPMENT
IEC 60947-3 : 3.2	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 3: SWITCHES, DISCONNECTORS, SWITCH-DISCONNECTORS AND FUSE-COMBINATION UNITS
EN 1005-3 : 2002 + A1 2008	SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 3: RECOMMENDED FORCE LIMITS FOR MACHINERY OPERATION
IEC 61508-1 : 2.0	FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 1: GENERAL REQUIREMENTS
EN 60529 : 1991 COR 2016	DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015)
IEC 62061 : 1.2	SAFETY OF MACHINERY - FUNCTIONAL SAFETY OF SAFETY-RELATED ELECTRICAL, ELECTRONIC AND PROGRAMMABLE ELECTRONIC CONTROL SYSTEMS
ISO 14122-2 : 2016	SAFETY OF MACHINERY - PERMANENT MEANS OF ACCESS TO MACHINERY - PART 2: WORKING PLATFORMS AND WALKWAYS
EN 50370-1 : 2005	ELECTROMAGNETIC COMPATIBILITY (EMC) - PRODUCT FAMILY STANDARD FOR MACHINE TOOLS - PART 1: EMISSION
EN 60947-5-3 : 2013	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-3: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - REQUIREMENTS FOR PROXIMITY DEVICES WITH DEFINED BEHAVIOUR UNDER FAULT CONDITIONS (PDDB) (IEC 60947-5-3:2013)
EN ISO 11688-1 : 2009	ACOUSTICS - RECOMMENDED PRACTICE FOR THE DESIGN OF LOW-NOISE MACHINERY AND EQUIPMENT - PART 1: PLANNING (ISO/TR 11688-1:1995)
EN ISO 14122-1 : 2016	SAFETY OF MACHINERY - PERMANENT MEANS OF ACCESS TO MACHINERY - PART 1: CHOICE OF FIXED MEANS AND GENERAL REQUIREMENTS OF ACCESS (ISO 14122-1:2016)
ISO 13849-1 : 2015	SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN
ISO TR 11688-2 : 1998(R2009)	ACOUSTICS - RECOMMENDED PRACTICE FOR THE DESIGN OF LOW-NOISE MACHINERY AND EQUIPMENT - PART 2: INTRODUCTION TO THE PHYSICS OF LOW-NOISE DESIGN
EN ISO 11202 : 2010	ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS APPLYING APPROXIMATE ENVIRONMENTAL CORRECTIONS
EN ISO 14738 : 2008	SAFETY OF MACHINERY - ANTHROPOMETRIC REQUIREMENTS FOR THE DESIGN OF WORKSTATIONS AT MACHINERY
IEC 61496-2 : 3.0	SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 2: PARTICULAR REQUIREMENTS FOR EQUIPMENT USING ACTIVE OPTO-ELECTRONIC PROTECTIVE DEVICES (AOPDS)
EN 60204-1 : 2006 COR 2010	SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
EN 61508-4 : 2010	FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 4: DEFINITIONS AND ABBREVIATIONS
EN 894-1 : 1997 + A1 2008	SAFETY OF MACHINERY - ERGONOMICS REQUIREMENTS FOR THE DESIGN OF DISPLAYS AND CONTROL ACTUATORS - PART 1: GENERAL PRINCIPLES FOR HUMAN INTERACTIONS WITH DISPLAYS AND CONTROL ACTUATORS

Add To Cart

Product Format

Quantity

add to cart

DIN EN 12622 E : 2014

Table of Contents - (Show below) - (Hide below)

Abstract - (Show below) - (Hide below)

General Product Information - (Show below) - (Hide below)

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Standards Referencing This Book - (Show below) - (Hide below)

Add To Cart

Publisher

Category

Sub Category

Access your standards online with a subscription?