DIN EN 13055-2 E : 2004
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
LIGHTWEIGHT AGGREGATES - PART 2: LIGHTWEIGHT AGGREGATES FOR BITUMINOUS MIXTURES AND SURFACE TREATMENTS AND FOR UNBOUND AND BOUND APPLICATIONS
11-01-2016
01-12-2013
Foreword<br>1 Scope<br>2 Normative references<br>3 Terms, definitions and abbreviations<br>4 Requirements<br> 4.1 General<br> 4.2 Density<br> 4.3 Aggregate size<br> 4.4 Grading<br> 4.5 Particle shape<br> 4.6 Fines<br> 4.7 Grading of LWA filler<br> 4.8 Water content<br> 4.9 Water absorption<br> 4.10 Bulk crushing resistance<br> 4.11 Percentage of crushed particles<br> 4.12 Resistance to disintegration<br> 4.13 Freezing and thawing resistance<br> 4.14 Water suction height<br> 4.15 Compaction and load bearing capacity<br> 4.16 Resistance to cyclic compressive loading<br> 4.17 Stiffening properties<br> 4.18 Voids of dry compacted LWA filler<br> 4.19 Resistance to thermal shock<br> 4.20 Resistance to polishing<br> 4.21 Resistance to wear by abrasion from studded tyres of<br> coarse LWA in surface treatments<br> 4.22 Compatibility between LWA and bitumen<br> 4.23 Chemical requirements<br> 4.24 Thermal conductivity<br>Testing<br> 5.1 Sampling<br> 5.2 Quantity of test specimens<br> 5.3 Preparation of test specimens<br>6 Evaluation of conformity<br> 6.1 General<br> 6.2 Initial type tests<br> 6.3 Factory production control<br>7 Designation, supply marking and labelling<br> 7.1 Designation<br> 7.2 Supply<br> 7.3 Marking and labelling<br>Annex A (normative) Compaction and load bearing capacity<br> A.1 General<br> A.2 Principle<br> A.3 Sampling<br> A.4 Apparatus<br> A.5 Preparation of test specimens<br> A.6 Procedure<br> A.7 Calculation and expression of results<br> A.8 Test report<br>Annex B (normative) Determination of resistance to freezing and<br> thawing of lightweight aggregates<br> B.1 Introduction<br> B.2 Principle<br> B.3 Apparatus<br> B.4 Sampling<br> B.5 Test specimens<br> B.6 Procedure<br> B.7 Calculation and expression of results<br> B.8 Test report<br>Annex C (normative) Factory production control<br> C.1 Introduction<br> C.2 Organization<br> C.3 Control procedures<br> C.4 Management of the production<br> C.5 Inspection and test<br> C.6 Records<br> C.7 Control of non-conforming product<br> C.8 Handling, storage and conditioning in production areas<br> C.9 Transport and packaging<br> C.10 Training of personnel<br>Annex D (informative) Guidance on how to convert quantities by mass<br> to quantities by volume<br> D.1 Background<br> D.2 Example calculation<br>Annex ZA (informative) Clauses of this European Standard addressing<br> the provisions of the EU Construction Products Directive
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.