DIN 61854-1:1987-04
|
TEXTILE GLASS - WOVEN GLASS FABRICS FOR PLASTICS REINFORCEMENT - WOVEN GLASS FILAMENT FABRIC AND WOVEN ROVING - TECHNICAL DELIVERY CONDITIONS
|
ISO 1163-1:1995
|
Plastics Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials Part 1: Designation system and basis for specifications
|
EN ISO 9771 : 1997
|
PLASTICS - PHENOLIC RESINS - DETERMINATION OF THE PSEUDO-ADIABATIC TEMPERATURE RISE OF LIQUID RESOLS WHEN CURED UNDER ACID CONDITIONS (ISO 9771:1995)
|
DIN EN 923:2016-03
|
ADHESIVES - TERMS AND DEFINITIONS
|
EN ISO 3001 : 1999
|
PLASTICS - EPOXY COMPOUNDS - DETERMINATION OF EPOXY EQUIVALENT
|
EN ISO 9073-2 : 1996
|
TEXTILES - TEST METHODS FOR NONWOVENS - PART 2: DETERMINATION OF THICKNESS
|
EN ISO 2114:2000/AC:2005
|
PLASTICS (POLYESTER RESINS) AND PAINTS AND VARNISHES (BINDERS) - DETERMINATION OF PARTIAL ACID VALUE AND TOTAL ACID VALUE
|
PREN 13121-3 : DRAFT 2014
|
GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 3: DESIGN AND WORKMANSHIP
|
EN ISO 6721-2:2008
|
Plastics - Determination of dynamic mechanical properties - Part 2: Torsion-pendulum method (ISO 6721-2:2008)
|
ISO 2797:1986
|
Textile glass — Rovings — Basis for a specification
|
ISO 5661:1983
|
Petroleum products Hydrocarbon liquids Determination of refractive index
|
EN 59:2016
|
Glass reinforced plastics - Determination of indentation hardness by means of a Barcol hardness tester
|
EN ISO 527-2:2012
|
Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012)
|
ISO 6271:2015
|
Clear liquids Estimation of colour by the platinum-cobalt colour scale
|
ISO 3374:2000
|
Reinforcement products Mats and fabrics Determination of mass per unit area
|
EN ISO 178:2010/A1:2013
|
PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010/AMD 1:2013)
|
EN ISO 1675:1998
|
Plastics - Liquid resins - Determination of density by the pyknometer method (ISO 1675:1985)
|
ISO 11359-2:1999
|
Plastics Thermomechanical analysis (TMA) Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature
|
EN ISO 1163-1 : 1999
|
PLASTICS - UNPLASTICIZED POLY(VINLY CHLORIDE) (PVC-U) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS
|
EN ISO 3251:2008
|
Paints, varnishes and plastics - Determination of non-volatile-matter content (ISO 3251:2008)
|
ISO 1113:1979
|
Information processing Representation of the 7- bit coded character set on punched tape
|
EN ISO 1889:2009
|
Reinforcement yarns - Determination of linear density (ISO 1889:2009)
|
PREN 13121-4 : DRAFT 1998
|
GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 4: DELIVERY, INSTALLATION AND MAINTENANCE
|
EN ISO 75-2:2013
|
Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite (ISO 75-2:2013)
|
ISO 1183:1987
|
Plastics Methods for determining the density and relative density of non-cellular plastics
|
EN 2901992 : 1992
|
TEXTILES - NONWOVENS - DEFINITION
|
ISO 472:2013
|
Plastics Vocabulary
|
EN ISO 3219:1994
|
Plastics - Polymers/resins in the liquid state or as emulsions or dispersions - Determination of viscosity using a rotational viscometer with defined shear rate (ISO 3219:1993)
|
ISO 2113:1996
|
Reinforcement fibres — Woven fabrics — Basis for a specification
|
ISO 1887:2014
|
Textile glass Determination of combustible-matter content
|
EN 10204:2004
|
Metallic products - Types of inspection documents
|
DIN 61853-1:1987-04
|
TEXTILE GLASS; TEXTILE GLASS MATS FOR PLASTICS REINFORCEMENT; TECHNICAL DELIVERY CONDITIONS
|
ISO 2559:2011
|
Textile glass Mats (made from chopped or continuous strands) Designation and basis for specifications
|
EN ISO 2554 : 1999
|
PLASTICS - UNSATURATED POLYESTER RESINS - DETERMINATION OF HYSROXYL VALUE
|
EN ISO 9702 : 1998
|
PLASTICS - AMINE EPOXIDE HARDENERS - DETERMINATION OF PRIMARY, SECONDARY AND TERTIARY AMINE GROUP NITROGEN CONTENT
|
EN ISO 2592:2017
|
Petroleum and related products - Determination of flash and fire points - Cleveland open cup method (ISO 2592:2017)
|
ISO 2211:1973
|
Liquid chemical products Measurement of colour in Hazen units (platinum-cobalt scale)
|
EN ISO 868:2003
|
Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003)
|
EN ISO 1133:2005
|
PLASTICS - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND THE MELT VOLUME-FLOW RATE (MVR) OF THE THERMOPLASTICS
|
EN ISO 306:2013
|
Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) (ISO 306:2013)
|
EN ISO 472:2013
|
Plastics - Vocabulary (ISO 472:2013)
|
EN ISO 2535 : 2002
|
PLASTICS - UNSATURATED POLYESTER RESINS - MEASUREMENT OF GEL TIME AT AMBIENT TEMPERATURE (ISO 2535:2001)
|
EN ISO 3344 : 1997
|
REINFORCEMENT PRODUCTS - DETERMINATION OF MOISTURE CONTENT
|