• There are no items in your cart

DIN EN 13135-2:2011-07

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

CRANES - EQUIPMENT - PART 2: NON-ELECTROTECHNICAL EQUIPMENT
Available format(s)

Hardcopy , PDF

Superseded date

05-01-2013

Language(s)

German

Published date

01-01-2011

Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 List of significant hazards
5 Safety requirements and/or protective measures
  5.1 General
  5.2 Structure and structural equipment
       5.2.1 Structures
       5.2.2 Structural equipment
  5.3 Driving mechanisms
       5.3.1 General
       5.3.2 Clutches and couplings
       5.3.3 Service brake
       5.3.4 Gear drives
       5.3.5 Wheels
       5.3.6 Switching from manual drive to power drive
  5.4 Rope and chain drives
       5.4.1 Rope drives
       5.4.2 Chain drives
  5.5 Fixed load lifting attachments
       5.5.1 General
       5.5.2 Hooks
       5.5.3 Gripping devices based on adhesion
       5.5.4 Clamps, tongs, grapplers
       5.5.5 Traverses
       5.5.6 Lifting forks and C-hooks
  5.6 Safety devices
       5.6.1 Safety device against load drop during disconnection
             of drive torque
       5.6.2 Safety device to prevent overrunning of the end
             positions
       5.6.3 Derailment safety device
       5.6.4 Tipping safety device
       5.6.5 Means for securing the crane against wind effects
       5.6.6 Anti-collision device
  5.7 Fluid power systems
       5.7.1 Controls and control devices of fluid power systems
       5.7.2 Protective measures
       5.7.3 Overload testing
       5.7.4 Hydraulic equipment
       5.7.5 Pneumatic equipment
  5.8 Corrosion protection
  5.9 Protection against weakening of material
  5.10 Temperature
       5.10.1 Selection of materials considering ambient
              temperature
       5.10.2 Protection against hot parts due to operation
       5.10.3 Protection against hot parts due to ambient
              conditions
  5.11 Measures to decrease the consequences of loss of
       drive power
  5.12 Hoist mechanisms in conditions of increased severity
       of possible harm
       5.12.1 Basic level of acceptable risks
       5.12.2 Increased severity of possible harm
       5.12.3 Measures to decrease the probability of
              occurrence of harm
  5.13 Additional requirements for the transportation of
       hot molten metals
       5.13.1 Decreasing the risk of dropping of load with
              high thermal energy
       5.13.2 Protection against thermal radiation and
              ejection of hot particles
6 Verification of the safety requirements and/or protective
  measures
7 Information for use
  7.1 General
  7.2 Special requirements
  7.3 Maintenance instructions in the case of increased
       severity of possible harms
  7.4 Marking
Annex A (informative) Selection of a suitable set of crane
        standards for a given application
Annex B (normative) Cross list of vocabulary
Annex C (informative) National systems of standards for
        hooks and brakes
        C.1 Hooks
        C.2 Brakes
Annex D (informative) Design of rail wheel flanges
Annex E (normative) Gripping devices based on adhesion
Annex ZA (informative) Relationship between this European
         Standard and the Essential Requirements of EU
         Directive Machinery 98/37/EC, amended by Directive
         98/79/EC

Defines requirements for design and selection of non-electro-technical equipment for all types of crane with the objectives of protecting personnel from hazards affecting their lives and health and of ensuring reliability of function.

DocumentType
Standard
Pages
58
PublisherName
German Institute for Standardisation (Deutsches Institut für Normung)
Status
Superseded
SupersededBy

VDI 4467:2014-12 Tandem operation of cranes/trolleys
VDI 4449:2009-04 Guidance on the modification of crane systems

ISO 2408:2017 Steel wire ropes — Requirements
ISO 4308-1:2003 Cranes and lifting appliances Selection of wire ropes Part 1: General
CEN/TS 13001-3-1:2004/AC:2006 CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF OF COMPETENCE OF STEEL STRUCTURES
EN 13557:2003+A2:2008 Cranes - Controls and control stations
EN 982:1996+A1:2008 Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics
EN 1037:1995+A1:2008 Safety of machinery - Prevention of unexpected start-up
EN 13155:2003+A2:2009 Cranes - Safety - Non-fixed load lifting attachments
EN 12644-2:2000+A1:2008 Cranes - Information for use and testing - Part 2: Marking
ISO 4306-1:2007 Cranes — Vocabulary — Part 1: General
ISO 5598:2008 Fluid power systems and components Vocabulary
ISO 13732-1:2006 Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces
ISO 12488-1:2012 Cranes — Tolerances for wheels and travel and traversing tracks — Part 1: General
EN ISO 13850:2015 Safety of machinery - Emergency stop function - Principles for design (ISO 13850:2015)
DIN EN 12385-1:2009-01 STEEL WIRE ROPES - SAFETY - PART 1: GENERAL REQUIREMENTS
ISO 1940-1:2003 Mechanical vibration Balance quality requirements for rotors in a constant (rigid) state Part 1: Specification and verification of balance tolerances
EN 818-7:2002+A1:2008 Short link chain for lifting purposes - Safety - Part 7: Fine tolerance hoist chain, Grade T (Types T, DAT and DT)
IEC 60204-32:2008 Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines
ISO 606:2015 Short-pitch transmission precision roller and bush chains, attachments and associated chain sprockets
EN 1050 : 1996 SAFETY OF MACHINERY - PRINCIPLES FOR RISK ASSESSMENT
EN 13411-3:2004+A1:2008 Terminations for steel wire ropes - Safety - Part 3: Ferrules and ferrule-securing
EN 12644-1:2001+A1:2008 Cranes - Information for use and testing - Part 1: Instructions
EN ISO 13732-1:2008 Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006)
EN 13411-7:2006+A1:2008 Terminations for steel wire ropes - Safety - Part 7: Symmetric wedge socket
EN 60204-32:2008 Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines
EN 13001-2:2014 Crane safety - General design - Part 2: Load actions
ISO 6072:2011 Rubber Compatibility between hydraulic fluids and standard elastomeric materials
EN 13135-1:2003+A1:2010 Cranes - Equipment - Part 1: Electrotechnical equipment
ISO 12944-1:2017 Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 1: General introduction
EN 13411-1:2002+A1:2008 Terminations for steel wire ropes - Safety - Part 1: Thimbles for steel wire rope slings
EN ISO 12100-1:2003/A1:2009 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY
EN 13001-1:2015 Cranes - General design - Part 1: General principles and requirements
EN 13411-4:2011 Terminations for steel wire ropes - Safety - Part 4: Metal and resin socketing
EN 13411-6:2004+A1:2008 Terminations for steel wire ropes - Safety - Part 6: Asymmetric wedge socket
ISO 12100-2:2003 Safety of machinery Basic concepts, general principles for design Part 2: Technical principles
EN ISO 12100-2:2003/A1:2009 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES
ISO 4347:2015 Leaf chains, clevises and sheaves Dimensions, measuring forces, tensile strengths and dynamic strengths
EN 983:1996+A1:2008 Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics
ISO 12100-1:2003 Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology
ISO 13850:2015 Safety of machinery Emergency stop function Principles for design
EN 818-1:1996+A1:2008 Short link chain for lifting purposes - Safety - Part 1: General conditions of acceptance
ISO 2943:1998 Hydraulic fluid power Filter elements Verification of material compatibility with fluids
ISO 4301-1:2016 Cranes — Classification — Part 1: General
ISO 7745:2010 Hydraulic fluid power — Fire-resistant (FR) fluids — Requirements and guidelines for use

View more information
US$149.99
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.