DIN EN 13163:2016-08
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE EXPANDED POLYSTYRENE (EPS) PRODUCTS - SPECIFICATION
Available format(s)
Hardcopy , PDF
Superseded date
03-07-2021
Language(s)
German, English
Published date
01-01-2016
National foreword
European foreword
1 Scope
2 Normative references
3 Terms, definitions, symbols, units and abbreviated
terms
4 Requirements
5 Test methods
6 Designation code
7 Assessment and Verification of the Constancy of
Performance (AVCP)
8 Marking and labelling
Annex A (normative) - Determination of the declared
values of thermal resistance and thermal
conductivity
Annex B (normative) - Product type determination (PTD) and
factory production control (FPC)
Annex C (normative) - Product classification
Annex D (normative) - Multi layered EPS products
Annex E (informative) - Verification of the reaction to fire
classification of raw materials
Annex F (informative) - Additional properties
Annex ZA (informative) - Clauses of this European Standard
addressing the provisions of the EU Construction
Products Regulation
Bibliography
Defines the requirements for factory made expanded polystyrene products, with or without rigid or flexible facings or coatings, which are used for the thermal insulation of buildings.
| DevelopmentNote |
Partially supersedes DIN 18164-1. (02/2002)
|
| DocumentType |
Standard
|
| Pages |
68
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| Supersedes |
| Standards | Relationship |
| NS EN 13163 : 2012 + A2 2016 | Identical |
| NF EN 13163 : 2013 + A2 2017 | Identical |
| I.S. EN 13163:2012 | Identical |
| UNE-EN 13163:2013 | Identical |
| BS EN 13163 : 2012 | Identical |
| EN 13163:2012+A2:2016 | Identical |
| UNI EN 13163 : 2013 | Identical |
| NEN EN 13163 : 2012 + A2 2016 | Identical |
| NBN EN 13163 : 2013 + A1 2015 | Identical |
| SN EN 13163 : 2012 + A2 2016 | Identical |
| DIN V 4108-4:2007-06 | THERMAL INSULATION AND ENERGY ECONOMY IN BUILDINGS - PART 4: HYGROTHERMAL DESIGN VALUES |
| DIN HDBK 90 : 9ED 2013 | DAEMM- UND BRANDSCHUTZARBEITEN AN TECHNISCHEN ANLAGEN VOB/STLB-BAU - VOB TEIL B: DIN 1961; VOB TEIL C: ATV DIN 18299, ATV DIN 18421 |
| DIN 18332:2016-09 | GERMAN CONSTRUCTION CONTRACT PROCEDURES (VOB) - PART C: GENERAL TECHNICAL SPECIFICATIONS IN CONSTRUCTION CONTRACTS (ATV) - NATURAL STONE WORK |
| VDG M 4 : 2014 | |
| DIN 18516-1:2010-06 | Cladding for external walls, ventilated at rear - Part 1: Requirements, principles of testing |
| DIN 18330:2016-09 | GERMAN CONSTRUCTION CONTRACT PROCEDURES (VOB) - PART C: GENERAL TECHNICAL SPECIFICATIONS IN CONSTRUCTION CONTRACTS (ATV) - MASONRY WORK |
| VDI 3805 Blatt 18:2013-09 | Product data exchange in the building services - Panel heating/cooling |
| DIN 4108-4:2016-07 (Draft) | THERMAL INSULATION AND ENERGY ECONOMY IN BUILDINGS - PART 4: HYGROTHERMAL DESIGN VALUES |
| DIN 4102-16:2015-09 | Fire behaviour of building materials and building components - Part 16: "Brandschacht" tests |
| DIN 18345:2016-09 | GERMAN CONSTRUCTION CONTRACT PROCEDURES (VOB) - PART C: GENERAL TECHNICAL SPECIFICATIONS IN CONSTRUCTION CONTRACTS (ATV) - THERMAL INSULATION COMPOSITE SYSTEMS |
| DIN 68800-2:2012-02 | Wood preservation - Part 2: Preventive constructional measures in buildings |
| DIN 4109-33:2016-07 | SOUND INSULATION IN BUILDINGS - PART 33: DATA FOR VERIFICATION OF SOUND INSULATION (COMPONENT CATALOGUE) - TIMBER CONSTRUCTION, LIGHTWEIGHT CONSTRUCTION AND DRY WALLING |
| DIN 4102-4:2016-05 | FIRE BEHAVIOUR OF BUILDING MATERIALS AND BUILDING COMPONENTS - PART 4: SYNOPSIS AND APPLICATION OF CLASSIFIED BUILDING MATERIALS, COMPONENTS AND SPECIAL COMPONENTS |
| ISO 9229:2007 | Thermal insulation Vocabulary |
| EN 16025-1:2013 | Thermal and/or sound insulating products in building construction - Bound EPS ballastings - Part 1: Requirements for factory premixed EPS dry plaster |
| EN 12667:2001 | Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Products of high and medium thermal resistance |
| EN 12085:2013 | Thermal insulating products for building applications - Determination of linear dimensions of test specimens |
| EN 15037-4:2010+A1:2013 | Precast concrete products - Beam-and-block floor systems - Part 4: Expanded polystyrene blocks |
| EN ISO 10456:2007/AC:2009 | BUILDING MATERIALS AND PRODUCTS - HYGROTHERMAL PROPERTIES - TABULATED DESIGN VALUES AND PROCEDURES FOR DETERMINING DECLARED AND DESIGN THERMAL VALUES |
| EN 1607:2013 | Thermal insulating products for building applications - Determination of tensile strength perpendicular to faces |
| EN 14309:2015 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE PRODUCTS OF EXPANDED POLYSTYRENE (EPS) - SPECIFICATION |
| EN 13820:2003 | Thermal insulating materials for building applications - Determination of organic content |
| EN 1606:2013 | Thermal insulating products for building applications - Determination of compressive creep |
| EN 14933:2007 | Thermal insulation and light weight fill products for civil engineering applications - Factory made products of expanded polystyrene (EPS) - Specification |
| ISO 12491:1997 | Statistical methods for quality control of building materials and components |
| EN 29052-1:1992 | Acoustics - Determination of dynamic stiffness - Part 1: Materials used under floating floors in dwellings |
| EN 12939:2000 | Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Thick products of high and medium thermal resistance |
| ISO 1716:2010 | Reaction to fire tests for products Determination of the gross heat of combustion (calorific value) |
| EN ISO 9229:2007 | Thermal insulation - Vocabulary (ISO 9229:2007) |
| EN 1605:2013 | Thermal insulating products for building applications - Determination of deformation under specified compressive load and temperature conditions |
| EN 824:2013 | Thermal insulating products for building applications - Determination of squareness |
| EN 12088:2013 | Thermal insulating products for building applications - Determination of long term water absorption by diffusion |
| ISO 11925-2:2010 | Reaction to fire tests Ignitability of products subjected to direct impingement of flame Part 2: Single-flame source test |
| EN ISO 1182:2010 | Reaction to fire tests for products - Non-combustibility test (ISO 1182:2010) |
| EN 825:2013 | Thermal insulating products for building applications - Determination of flatness |
| EN 823:2013 | Thermal insulating products for building applications - Determination of thickness |
| EN 12431:2013 | Thermal insulating products for building applications - Determination of thickness for floating floor insulating products |
| ISO 1182:2010 | Reaction to fire tests for products Non-combustibility test |
| EN 13823:2010+A1:2014 | REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - BUILDING PRODUCTS EXCLUDING FLOORINGS EXPOSED TO THE THERMAL ATTACK BY A SINGLE BURNING ITEM |
| EN 1602:2013 | Thermal insulating products for building applications - Determination of the apparent density |
| EN 12087:2013 | Thermal insulating products for building applications - Determination of long term water absorption by immersion |
| EN 13793:2003 | Thermal insulating products for building applications - Determination of behaviour under cyclic loading |
| EN 12090:2013 | Thermal insulating products for building applications - Determination of shear behaviour |
| EN 1603:2013 | Thermal insulating products for building applications - Determination of dimensional stability under constant normal laboratory conditions (23 °C/ 50 % relative humidity) |
| ISO 16269-6:2014 | Statistical interpretation of data Part 6: Determination of statistical tolerance intervals |
| EN 1604:2013 | Thermal insulating products for building applications - Determination of dimensional stability under specified temperature and humidity conditions |
| EN 16025-2:2013 | Thermal and/ or sound insulating products in building construction - Bound EPS ballastings - Part 2: Processing of the factory premixed EPS dry plaster |
| EN 1991-1-1:2002/AC:2009 | EUROCODE 1: ACTIONS ON STRUCTURES - PART 1-1: GENERAL ACTIONS - DENSITIES, SELF-WEIGHT, IMPOSED LOADS FOR BUILDINGS |
| EN 12091:2013 | Thermal insulating products for building applications - Determination of freeze-thaw resistance |
| EN 12089:2013 | Thermal insulating products for building applications - Determination of bending behaviour |
| ISO 10456:2007 | Building materials and products — Hygrothermal properties — Tabulated design values and procedures for determining declared and design thermal values |
| EN 12429:1998 | Thermal insulating products for building applications - Conditioning to moisture equilibrium under specified temperature and humidity conditions |
| EN 13499:2003 | Thermal insulation products for buildings - External thermal insulation composite systems (ETICS) based on expanded polystyrene - Specification |
| ISO 9052-1:1989 | Acoustics — Determination of dynamic stiffness — Part 1: Materials used under floating floors in dwellings |
| EN 826:2013 | Thermal insulating products for building applications - Determination of compression behaviour |
| EN ISO 1716:2010 | Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value) (ISO 1716:2010) |
| EN 15715:2009 | Thermal insulation products - Instructions for mounting and fixing for reaction to fire testing - Factory made products |
| EN ISO 11925-2:2010/AC:2011 | REACTION TO FIRE TESTS - IGNITABILITY OF PRODUCTS SUBJECTED TO DIRECT IMPINGEMENT OF FLAME - PART 2: SINGLE-FLAME SOURCE TEST |
| EN 12086:2013 | Thermal insulating products for building applications - Determination of water vapour transmission properties |
| EN 13172:2012 | Thermal insulation products - Evaluation of conformity |
| EN 822:2013 | Thermal insulating products for building applications - Determination of length and width |
US$155.62
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - German
PDF - German
Hardcopy - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.