DIN EN 13369:2013-08
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
COMMON RULES FOR PRECAST CONCRETE PRODUCTS
Hardcopy , PDF
07-10-2020
German, English
01-01-2013
National foreword
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
5 Test methods
6 Evaluation of conformity
7 Marking
8 Technical documentation
Annex A (informative) - Concrete cover as
regard to corrosion
Annex B (informative) - Concrete quality control
Annex C (informative) - Reliability considerations
Annex D (normative) - Inspection schemes
Annex E (informative) - Assessment of compliance
Annex F - This annex does not exist
Annex G (normative) - Test of water absorption
Annex H (informative) - Shape correlation factor for cores
Annex I - This annex does not exist
Annex J (informative) - Measurement of dimensions
Annex K (informative) - Prestressing losses
Annex L (informative) - This annex does not exist
Annex M (informative) - Technical documentation
Annex N (informative) - Properties of indented
bars and wire
Annex O (informative) - Resistance to fire:
recommendations for the use
of EN 1992-1-2
Annex P (informative) - Survey of type testing
Annex Q (informative) - Use of reclaimed
crushed and recycled coarse aggregates
in concrete
Bibliography
This standard is included in DIN Handbook 5.
DevelopmentNote |
DRAFT 2017 issued in May 2017. (05/2017)
|
DocumentType |
Standard
|
Pages |
77
|
PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
Status |
Superseded
|
SupersededBy |
Standards | Relationship |
ONORM EN 13369 : 2013 | Identical |
SN EN 13369 : 2013 | Identical |
BS EN 13369:2013 | Identical |
UNI EN 13369 : 2013 | Identical |
I.S. EN 13369:2013 | Identical |
NBN EN 13369 : 2013 | Identical |
UNE-EN 13369:2013 | Identical |
NF EN 13369 : 2013 | Identical |
NS EN 13369 : 2013 | Identical |
NEN EN 13369 : 2018 | Identical |
EN 13369:2018 | Identical |
DIN 1045-4:2012-02 | Concrete, reinforced and prestressed concrete structures - Part 4: Additional rules for the production and the conformity of prefabricated elements |
DIN HDBK 5 : 11ED 2013 |
EN 12390-3:2009/AC:2011 | TESTING HARDENED CONCRETE - PART 3: COMPRESSIVE STRENGTH OF TEST SPECIMENS |
ISO 3951-1:2013 | Sampling procedures for inspection by variables — Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL |
EN ISO 10456:2007/AC:2009 | BUILDING MATERIALS AND PRODUCTS - HYGROTHERMAL PROPERTIES - TABULATED DESIGN VALUES AND PROCEDURES FOR DETERMINING DECLARED AND DESIGN THERMAL VALUES |
CEN/TR 15728:2016 | Design and use of inserts for lifting and handling of precast concrete elements |
ISO 717-2:2013 | Acoustics Rating of sound insulation in buildings and of building elements Part 2: Impact sound insulation |
ISO 7873:1993 | Control charts for arithmetic average with warning limits |
EN 12390-7:2009 | Testing hardened concrete - Part 7: Density of hardened concrete |
EN 1934:1998 | Thermal performance of buildings - Determination of thermal resistance by hot box method using heat flow meter - Masonry |
PREN 10138-2 : DRAFT 2000 | PRESTRESSING STEELS - PART 2: WIRE |
EN ISO 717-2:2013 | Acoustics - Rating of sound insulation in buildings and of building elements - Part 2: Impact sound insulation (ISO 717-2:2013) |
CEN/TR 15739:2008 | Precast concrete products - Concrete finishes - Identification |
PREN 10138-3 : DRAFT 2000 | PRESTRESSING STEELS - PART 3: STRAND |
EN ISO 8990:1996 | Thermal insulation - Determination of steady-state thermal transmission properties - Calibrated and guarded hot box (ISO 8990:1994) |
EN 1745:2012 | Masonry and masonry products - Methods for determining thermal properties |
EN 13501-2:2016 | Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance tests, excluding ventilation services |
EN 10080:2005 | Steel for the reinforcement of concrete - Weldable reinforcing steel - General |
EN 1008:2002 | Mixing water for concrete - Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete |
EN 12504-2:2012 | TESTING CONCRETE IN STRUCTURES - PART 2: NON-DESTRUCTIVE TESTING - DETERMINATION OF REBOUND NUMBER |
EN ISO 6946:2017 | Building components and building elements - Thermal resistance and thermal transmittance - Calculation methods (ISO 6946:2017, Corrected version 2021-12) |
EN 12354-1:2000 | Building Acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 1: Airborne sound insulation between rooms |
ASTM C 173/C173M : 2016 : REDLINE | Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method |
EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
EN 12620:2002+A1:2008 | Aggregates for concrete |
EN 12664:2001 | Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Dry and moist products of medium and low thermal resistance |
EN 12390-1:2012 | TESTING HARDENED CONCRETE - PART 1: SHAPE, DIMENSIONS AND OTHER REQUIREMENTS FOR SPECIMENS AND MOULDS |
EN 1992-1-2:2004/AC:2008 | EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN |
EN 12390-2:2009 | Testing hardened concrete - Part 2: Making and curing specimens for strength tests |
ISO 10456:2007 | Building materials and products — Hygrothermal properties — Tabulated design values and procedures for determining declared and design thermal values |
ISO 9001:2015 | Quality management systems — Requirements |
ISO 7870-4:2011 | Control charts Part 4: Cumulative sum charts |
EN 16192:2011 | Characterization of waste - Analysis of eluates |
EN 206-1:2000/A2:2005 | CONCRETE - PART 1: SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY |
ISO 7976-1:1989 | Tolerances for building — Methods of measurement of buildings and building products — Part 1: Methods and instruments |
ISO 717-1:2013 | Acoustics Rating of sound insulation in buildings and of building elements Part 1: Airborne sound insulation |
EN 206-9:2010 | Concrete - Part 9: Additional Rules for Self-compacting Concrete (SCC) |
EN 1097-6:2013 | Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption |
EN 12390-6:2009 | Testing hardened concrete - Part 6: Tensile splitting strength of test specimens |
PREN 10138-4 : DRAFT 2000 | PRESTRESSING STEELS - PART 4: BARS |
EN 1992-1-1:2004/A1:2014 | EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS |
EN 12350-7:2009 | Testing fresh concrete - Part 7: Air content - Pressure methods |
ISO 6946:2017 | Building components and building elements — Thermal resistance and thermal transmittance — Calculation methods |
EN 12504-1:2009 | Testing concrete in structures - Part 1: Cored specimens - Taking, examining and testing in compression |
EN 1990:2002/A1:2005/AC:2010 | EUROCODE - BASIS OF STRUCTURAL DESIGN |
ISO 8990:1994 | Thermal insulation — Determination of steady-state thermal transmission properties — Calibrated and guarded hot box |
ISO 1803:1997 | Building construction Tolerances Expression of dimensional accuracy Principles and terminology |
EN 13670:2009 | Execution of concrete structures |
EN 12354-2:2000 | Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 2: Impact sound insulation between rooms |
EN 934-2:2009+A1:2012 | Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures - Definitions, requirements, conformity, marking and labelling |
EN 13791:2007 | Assessment of in-situ compressive strength in structures and precast concrete components |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.