DIN EN 14035-6:2004-11

Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Construction
  4.1 Means of ignition
  4.2 Attachment of initial fuse
  4.3 Protection of initial fuse
      4.3.1 General
      4.3.2 Initial fuse protected by fuse cover
      4.3.3 Initial fuse protected by primary pack
      4.3.4 Protruding fuse designed to resist side
            ignition
  4.4 Materials of firework case
  4.5 Integrity
  4.6 Net explosive content
  4.7 Vertical stability
5 Performance
  5.1 Initial fuse
  5.2 Principal effect
  5.3 Functioning
  5.4 Explosion
  5.5 Burning matter
  5.6 Burning rate of pyrotechnic composition
  5.7 Stability
6 Primary pack or selection pack
7 Minimum labelling requirements
  7.1 General
  7.2 Type name and category
  7.3 Safety information
      7.3.1 General
      7.3.2 Category 1 Bengal flames
      7.3.3 Category 2 Bengal flames
      7.3.4 Category 3 Bengal flames
      7.3.5 Placing instructions
  7.4 Name, address and telephone number of manufacturer
      or distributor or importer
  7.5 Reference to this standard
  7.6 Printing
      7.6.1 Labelling
      7.6.2 Type size
  7.7 Marking of very small Bengal flames
      7.7.1 Reduced type size
      7.7.2 Reduced information
  7.8 Additional information on the primary pack (if
      applicable)
8 Test methods
  8.1 Attachment of protruding fuse (type test and batch
      test)
      8.1.1 Apparatus
      8.1.2 Procedure
  8.2 Attachment of sealing paper or ignition head (type
      test)
      8.2.1 Apparatus
      8.2.2 Procedure
  8.3 Vertical stability test (type test)
      8.3.1 Apparatus
      8.3.2 Procedure
  8.4 Performance (type test and batch test)
      8.4.1 Test environment
      8.4.2 Apparatus
      8.4.3 Procedure
  8.5 Determination of net explosive content (type test)
      8.5.1 Apparatus
      8.5.2 Procedure
  8.6 Side ignition of initial fuse (type test)
      8.6.1 Material
      8.6.2 Test area
      8.6.3 Apparatus
      8.6.4 Test specimen
      8.6.5 Procedure
  8.7 Labelling (type test and batch test)
Annex A (normative) Type testing
  A.1 General
  A.2 Number of Bengal flames to be tested
  A.3 Loose pyrotechnic composition
  A.4 Thermal conditioning
  A.5 Mechanical conditioning
  A.6 Number of primary packs to be examined
  A.7 Test report
Annex B (normative) Batch testing
  B.1 General
  B.2 Sampling plans
  B.3 Unit of product
  B.4 Nonconformities
  B.5 Test report
  B.6 Acceptance or rejection of a batch
Annex C (normative) Method for determination of smouldering
        rate of cigarette
Annex D (informative) A-Deviations